
ZArduino
zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

This project features a custom ATmega328P microcontroller board programmed in C. It drives a 4-digit 7-segment display to implement a simple counter application.
7-segment display is an open-source printed circuit board by contispaulcristian, from the contispaulcristian/7-segment-display repository on GitHub. It is a 2-layer board of 53 × 56 mm with 18 parts on 34 nets, routed with 140 tracks and 0 vias.
It is built around the ATMEGA328P-PU. Its parts include 10 resistors, 3 capacitors, 2 ICs, 1 connector and 1 switch. It belongs with the lEDs and displays boards and the AVR (ATmega, ATtiny) boards of this library.
Hardware Design:
Programming the Board:
Software Details:
This project demonstrates the use of multiplexed displays, timer interrupts, and basic button controls in embedded systems.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 1 K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R4, R5, R6, R7, R8, R9, R10 |
| 2 | 22 pF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2 |
| 1 | 1 M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 10 K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 10 uF | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C3 |
| 1 | 16 MHz | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | ATMEGA328P-PU | digikey-footprints:DIP-28_W7.62mm | U1 |
| 1 | AVR ISP | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J1 |
| 1 | Reset | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1 |
| 1 | SH5461AS | Display_7Segment:CA56-12SRWA | U2 |

zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

coseyfannitutti/discipad
17-key numpad assembled with only through hole components, including usb type-c

matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer

coseyfannitutti/romeo
Staggered 40% keyboard pcb that can be assembled with only through hole components, including USB Type-C

mattybrad/drumkid
Version 4 was the first successful working design, with full code, schematics, Gerbers, etc available on GitHub.


leomil72/LM80C
A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO

It measures 53 × 56 mm and has 2 copper layers, 1.6 mm thick.
18 parts, built around the ATMEGA328P-PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the contispaulcristian/7-segment-display repository on GitHub, at the commit this page was made from: the board is Electronics/7_segment_display/7_segment_display.kicad_pcb and its schematic Electronics/7_segment_display/7_segment_display.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask contispaulcristian before reusing the design.