Multiplexing

6 boards

KiCad boards from 5 GitHub repositories tagged “multiplexing”, the most starred first; open any of them in PCBKit.

2 layers51.9 × 16 mm
Passive2-rpi non standard adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
3 parts4.4kGPL-2.0
2 layers81.3 × 76.2 mm
Rgb matrix pcb
1-max-1/rgb-matrix
PCB and software for driving an 8x8 matrix of common anode RGB LED's.
36 parts1
2 layers53 × 56 mm
7-segment display
contispaulcristian/7-segment-display
This project features a custom ATmega328P microcontroller board programmed in C. It drives a 4-digit 7-segment display to implement a simple counter application.
18 parts
2 layers77.3 × 76.7 mm
Led matrix 8x4 module
jkga/led_matrix_8x4_module
This repository aims to provide a basic program, schematic diagram, and PCB design for an eight by four (8x4) LED matrix with Arduino and SN74HC595 shift register IC
69 partsMIT
4 layers100 × 65 mm
Multi smtpa
WillMatthews/quad-sipm-fastcard
4 SiPMs on SMTPA eval board combined together using Signal Driven Multiplexing.
76 partsMIT
2 layers37 × 19 mm
Passive rpi hub75-adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
2 parts4.4kGPL-2.0

Passive2-rpi non standard adapter