2 layers
Apollo
rigidus/rigidus.ru
Contacts: email: i.am.rigidus טּ gmail.com jabber: rigidus@jabber.ru
111 parts20AGPL-3.0
2 layers77.3 × 76.7 mm
Led matrix 8x4 module
jkga/led_matrix_8x4_moduleThis repository aims to provide a basic program, schematic diagram, and PCB design for an eight by four (8x4) LED matrix with Arduino and SN74HC595 shift register IC
- Size
- 77.3 × 76.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 69
- Nets
- 58
- Pads
- 206
- Tracks, vias
- 418, 35
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 24 Feb 2022
- Updated
- 10 Mar 2022
Overview
Led matrix 8x4 module is an open-source printed circuit board by jkga, from the jkga/led_matrix_8x4_module repository on GitHub, published under the MIT licence. It is a 2-layer board of 77.3 × 76.7 mm with 69 parts on 58 nets, routed with 418 tracks and 35 vias.
It is built around the 74HC595 and PN2222A. Its parts include 32 diodes, 16 resistors, 8 transistors, 4 capacitors and 4 connectors. It belongs with the lEDs and displays boards of this library.
Main components
2README
README.mdLED Matrix(8x4) Module
This repository aims to provide a basic program, schematic diagram, and PCB design for an eight by four (8x4) LED matrix with Arduino and SN74HC595 shift register IC
Sketch & Pin Configurations
| Module | Arduino | |
|---|---|---|
| Latch | L | 8 |
| Serial Data Input | D | 11 |
| Clock Input | C | 12 |
| Row 1 | 4 | 4 |
| Row 2 | 3 | 5 |
| Row 3 | 2 | 6 |
| Row 4 | 1 | 7 |
| Power (+) | + | 5v |
| Power (-) | - | GND |
Bills of Materials
| QTY | Reference | Value |
|---|---|---|
| 1 | C1 | 33uf |
| 1 | C2 | 0.1uf |
| 1 | C3 | 0.1uf |
| 32 | D1 - D32 | LED (Vfmin = 1.7v; Ifmax = 0.25mA) |
| 1 | J1 | 1x4 Female Connector |
| 1 | J2 | 1x4 Female Connector |
| 1 | J3 | 1x4 Female Connector |
| 1 | J4 | 2x8 DIP Socket |
| 8 | Q1 - Q8 | PN2222A BJT Transistor |
| 8 | 4.7k ohms | |
| 8 | 510 ohms | |
| 1 | U1 | SN74HC595N |
| 10 | Jumper Wires |
Demo
L.O.V.E - A Valentine's day message to everyone
Schematic Diagram
Printed Circuit Board
Rendered Model
Parts
69| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | LED | LED_THT:LED_D5.0mm | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +16 |
| 8 | 4.7k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R3, R5, R7, R9, R11, R13, R15 |
| 8 | 510 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2, R4, R6, R8, R10, R12, R14, R16 |
| 8 | PN2222A | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2_Pad_Via | H1, H2, H3, H4 |
| 2 | 0.1uf | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C2, C4 |
| 1 | 100uf | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1 |
| 1 | 33uf | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C3 |
| 1 | 74HC595 | Package_DIP:DIP-16_W7.62mm | U1 |
| 1 | Conn_01x02_Female | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Horizontal | J2 |
| 1 | Conn_01x04 | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Horizontal | J1 |
| 1 | Conn_01x04_Female | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Horizontal | J3 |
| 1 | DIP_SOCKET_02x08 | Package_DIP:DIP-16_W7.62mm_Socket | J4 |
Similar boards
- 2 layers142.2 × 99.1 mm
CowPi mk3a
DocBohn/CowPi
Library for the Cow Pi hardware kit used to teach memory-mapped I/O, polling, and interrupts.
65 parts1Apache-2.0 - 2 layers50 × 50 mm
PectenAlphaSMD
Mucio-18/Herramientas_Microchip_XC8-PicAs
Repositorio con archivos include de códigos para microcontroladores PIC con el compilador XC8 pic-as
31 parts1 - 2 layers78.7 × 53.3 mm
Coffee timer
tibordp/coffee-timer
Kitchen timer on an ATtiny85 with a 7-segment display and a couple of shift registers
28 parts1GPL-2.0 - 2 layers202.6 × 43.9 mm
- 2 layers301 × 262.6 mm
1 Sistema FINAL
felipesantiagoach-ops/cdp1802-8bit-computer
8-bit microcomputer based on the RCA CDP1802, the first CMOS microprocessor. Three stages designed in KiCad: two built and tested (assembly programs, UART, Tiny BASIC, Elf/OS) and a final design with an ADC, I²C/SPI…
207 parts - 2 layers117.2 × 115.1 mm
- 2 layers156.9 × 102.2 mm
HardwareInterfaceBoard
plb500/AutoBloomer-SensorModules
Code and PCB designs for AutoBloomer MQTT sensor modules
85 parts
Questions
How big is the Led matrix 8x4 module PCB?
It measures 77.3 × 76.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Led matrix 8x4 module use?
69 parts, built around the 74HC595 and PN2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Led matrix 8x4 module KiCad files?
From the jkga/led_matrix_8x4_module repository on GitHub, at the commit this page was made from: the board is kicad/led_matrix_8x4_module.kicad_pcb and its schematic kicad/led_matrix_8x4_module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Led matrix 8x4 module design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).