Skip to the content

Interfaces and adapters

7,328 boards
  • 4 layers75 × 50 mmEOPRA interface, the printed circuit board in 3D

    EOPRA interface

    seanboe/eOPRA_suite

    Contains the board files (KiCAD + gerbers) and CLI for the eOPRA device control suite used in research on transfemoral and transtibial prosthetics at the MIT Biomechatronics Lab.

    256 parts
  • 4 layers32 × 36 mmMipi adapter revD, the printed circuit board in 3D

    Mipi adapter revD

    SebasKitten/SonySwitchUp

    Replacing the Sony VAIO UX motherboard with Nintendo Switch OLED hardware, with adapter designs to inspire cyberdecks and other custom builds.

    24 parts
  • 4 layers44 × 18.4 mmArduino Nano, the printed circuit board in 3D

    Arduino Nano

    sebastiansebs/Arduino-Nano-from-Scratch

    Custom-designed microcontroller development board based on the ATmega328P-M. The board integrates a USB-to-serial converter for programming and UART/SPI communication with comprehensive pin headers for flexible…

    39 parts
  • 2 layers52.7 × 31.8 mmJTAG dongle, the printed circuit board in 3D

    JTAG dongle

    Sebastien-Monfort/JTAG_dongle

    My take on the classic JTAG/SWD dongle board for debuging probes. I mostly use it with the 10-pins 1.27mm connector to flash and debug ARM MCUs.

    54 parts
  • 2 layers50.3 × 31.8 mmXlr5-passthrough breakout hw, the printed circuit board in 3D

    Xlr5-passthrough breakout hw

    second-string/xlr5-passthrough-breakout-hw

    Mount and breakout board for XLR5 male and female panel mount connectors

    13 partsMIT
  • 2 layers61 × 81.3 mmUSB Breakout v3.0, the printed circuit board in 3D

    USB Breakout v3.0

    Sembazuru/USB-breakout

    Pass-through Breakout Board for USB Cables

    26 parts
  • 4 layers94 × 65 mmLink base brd, the printed circuit board in 3D

    Link base brd

    semtronik/link-hardware

    Open hardware for the Semtronik Link devices: ESP32-S3 base board, interface modules and enclosure. KiCad and Fusion sources, CERN-OHL-S v2.

    115 parts
  • 2 layers45.7 × 68.6 mmHG Breakout, the printed circuit board in 3D

    HG Breakout

    senpaiashley/SR-board

    Custom PCB for Storming Robotics Electrical Engineering 2018

    23 partsMIT
  • 2 layers67.3 × 85.7 mmAutologger, the printed circuit board in 3D

    Autologger

    serhaturtis/ES-Autologger

    A data logger board for an automotive application

    78 parts
  • 2 layers74 × 55.8 mmHBridge, the printed circuit board in 3D

    HBridge

    serpentsniper/hbridge-motor-driver

    Two-channel brushed DC motor driver in KiCad. Discrete IRLZ44N H-bridges, IR2104 gate drivers, per-channel current sense and quadrature encoder inputs, on a 74 x 56 mm board with a Raspberry Pi Pico.

    63 partsMIT
  • 2 layers28.7 × 38 mmUSBtoSerial, the printed circuit board in 3D

    USBtoSerial

    serra82/USB2serial

    USB to serial converter based on FT232 or MCP2200

    34 partsCC0-1.0
  • 2 layers42.3 × 42.3 mmAs5600 breakout board, the printed circuit board in 3D

    As5600 breakout board

    ShaanJ1/AS5600-NEMA-17-Mounts

    Mounting hardware for attaching the AS5600 rotary encoder onto the back of the NEMA 17 stepper motor Includes a magnet centering jig which helps you properly center the magnet onto the rear shaft to glue it in place

    11 parts
  • 2 layersFT2232H USB to JTAG and UART, the printed circuit board in 3D

    FT2232H USB to JTAG and UART

    Shahrukh-13/FT2232H_USB_to_JTAG_and_UART

    Setting up FT2232H as XDS100V2 to work as USB to JTAG and UART adapter to program Texas Instruments Microcontrollers

    16 parts
  • 2 layers64.5 × 71.8 mmEsp rs485 modbus, the printed circuit board in 3D

    Esp rs485 modbus

    Shakir555/ESP32-CommBridge-485

    UART to RS-485 communication using ESP32 and ESP-IDF, designed for reliable industrial and IoT serial data transfer.

    31 parts
  • 2 layers30 × 51 mmDriver breakout module, the printed circuit board in 3D

    Driver breakout module

    SharkCNC/driver-breakout-module

    Simple RJ45 breakout board for Closed Loop Driver

    11 partsGPL-3.0
  • 2 layers120 × 80 mmEmup adapter, the printed circuit board in 3D

    Emup adapter

    sharpdad/mod-emup-usb

    emupadapter.py describes the board (parts, nets, placement); ./build.sh turns it into the KiCad schematic (emupadapter.kicadsch, .pdf), a routed PCB (emupadapter.kicadpcb), DRC / ERC reports and fab files (fab/: Gerber…

    19 partsMIT
  • 4 layers100 × 82.2 mm4 Bit - Seven Seg Interface, the printed circuit board in 3D

    4 Bit - Seven Seg Interface

    Shaxzodm2611/4-bit-Adder-Interface-Board

    A custom PCB designed to mimic the function of a CPU. Entirely made from discrete logic ICs.

    128 parts
  • 2 layers22 × 54 mmRp2040 devboard, the printed circuit board in 3D

    Rp2040 devboard

    shelxty/rp2040_devboard

    This is a compact, breakout-friendly devboard (2-layer PCB) built around the Raspberry Pi 2040 microcontroller. It contains an onboard QSPI flash, USB-C, and 30 GPIO pins broken out to dual 20-pin headers.

    33 parts
  • 2 layers79 × 60 mmROOM ENVIRONMENT PCB PRACTICE, the printed circuit board in 3D

    ROOM ENVIRONMENT PCB PRACTICE

    Shirnish/esp32-room-environment-monitor

    Progressive ESP32-S3 embedded-systems project: DHT11 temperature and humidity monitoring, Serial debugging, error handling, and millis() scheduling.

    14 parts
  • 4 layers110 × 57 mmInterface, the printed circuit board in 3D

    Interface

    Shisius/EyeMeterPCB

    Interface board for radxa cm5.

    211 partsCERN-OHL-P-2.0
  • 2 layers36.5 × 32 mmMy first pcb, the printed circuit board in 3D

    My first pcb

    ShitalTiwari045/ac-to-dc-rectifier-pcb

    A simple AC to DC bridge rectifier PCB designed using KiCad. This project converts AC input to filtered DC output using a bridge rectifier, smoothing capacitor, and LED power indicator.

    12 parts
  • 2 layersARDUINO PARKING SENSOR PCB, the printed circuit board in 3D

    ARDUINO PARKING SENSOR PCB

    ShivbalaramN/Arduino-Ultrasonic-Distance-Sensor-PCB

    The PCB was designed using KiCad to interface the ultrasonic sensor with the Arduino board and provide output through an LED indicator.

    8 parts
  • 2 layers96.5 × 93 mmEsp32-breakout, the printed circuit board in 3D

    Esp32-breakout

    Shlol762/Shlok_EnC_Inductions

    This repo contains all my required KiCAD and ROS 2 Humble packages for the Kratos Induction tasks.

    23 parts