4 layers95 × 95 mm
Cube motherboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
52 parts1.1kGPL-3.0
2 layers60 × 137.5 mm
Spider Breakout Board
SeanC0112/PCBUpload- Size
- 60 × 137.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 50
- Pads
- 107
- Tracks, vias
- 116, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 1 Nov 2026
- Updated
- 1 Nov 2026
Overview
Spider Breakout Board is an open-source printed circuit board by SeanC0112, from the SeanC0112/PCBUpload repository on GitHub. It is a 2-layer board of 60 × 137.5 mm with 17 parts on 50 nets, routed with 116 tracks and 0 vias.
It is built around the ESP32-S3-DEVKITC-1-N8. Its parts include 2 diodes and 1 IC. It belongs with the interfaces and adapters and microcontroller boards boards and the ESP32 boards of this library.
Main components
1README
README.mdPCBUpload
Upload of my PCB files for my quadruped robot
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | BLH | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | M7 |
| 1 | BLVI | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | M8 |
| 1 | BLVO | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | M9 |
| 1 | BRH | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | M10 |
| 1 | BRVI | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | M11 |
| 1 | BRVO | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | M12 |
| 1 | D24V10F5 | spidervoltageregs:D24V10F5 | D24V10F1 |
| 1 | D36V50F6 | spidervoltageregs:D36V50F6 | D36V50F1 |
| 1 | Dean T Plug | Dean:DEANS | Dean T Plug1 |
| 1 | ESP32-S3-DevKitC | PCM_Espressif:ESP32-S3-DevKitC | U1 |
| 1 | FLH | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | M1 |
| 1 | FLVI | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | M2 |
| 1 | FLVO | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | M3 |
| 1 | FRH | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | M4 |
| 1 | FRVI | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | M5 |
| 1 | FRVO | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | M6 |
| 1 | MPU6050_Module | Charleslabs_Parts:MPU6050_Module | A1 |
Similar boards
- 2 layers129.9 × 63.6 mm
Traeger rev 2.3.0.kicad pro
jazzmonger/Traeger-PID-Controller
Traeger Smoker/Grill Controller based on an
45 parts36 - 2 layers168.8 × 78.9 mm
Gameboy3
ohasanov-hbrw/tribit32-advanced
A tri-microcontroller, overengineered GameBoy Advance clone. More value was given to the controls and the exterior look, which is cool!
61 parts8 - 2 layers134.6 × 49.5 mm
- 2 layers90 × 102 mm
- 2 layers119.4 × 98.9 mm
PCB Pami
FIPATECH/CDFR26_PAMI
Open source firmware and PCB for a differential mobile robot (PAMI) based on ESP32-S3 - Coupe de France de Robotique
25 parts6 - 2 layers76.2 × 40.6 mm
EspressifESP32toExpressAdaptor
dnhutchins/ETC_Express_Reverse_Eng
The ultimate goal of this work is to develop an interface to use the control surface from a legacy ETC Express 24/48 lighting controller as a modern EOSNomad compatible programming and fader wing.
3 parts5 - 2 layers
E ink multi sensor
heckler/esphome-device-configs
Configuration definitions for local ESPHome files
11 parts4Apache-2.0
Questions
How big is the Spider Breakout Board PCB?
It measures 60 × 137.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Spider Breakout Board use?
17 parts, built around the ESP32-S3-DEVKITC-1-N8. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Spider Breakout Board KiCad files?
From the SeanC0112/PCBUpload repository on GitHub, at the commit this page was made from: the board is Spider Breakout Board.kicad_pcb and its schematic Spider Breakout Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Spider Breakout Board design in my own project?
Its repository states no licence, so its author keeps all rights: ask SeanC0112 before reusing the design.