
Cube motherboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels

This repo contains all my required KiCAD and ROS 2 Humble packages for the Kratos Induction tasks.
Esp32-breakout is an open-source printed circuit board by Shlol762, from the Shlol762/Shlok_EnC_Inductions repository on GitHub. It is a 2-layer board of 96.5 × 93 mm with 23 parts on 52 nets, routed with 87 tracks and 0 vias.
It is built around the ESP32-S3-DEVKITC-1-N8. Its parts include 7 connectors, 6 resistors, 4 diodes, 3 ICs and 3 switches. It belongs with the interfaces and adapters boards and the ESP32 boards of this library.
This repo contains all my required KiCAD and ROS 2 Humble packages for the Kratos Induction tasks.
breakout_footprint/: Custom symbol and footprints for I2C Multiplexer breakout board.libs/: Custom symbols and footprint libraries for sensors (MPU6050, HC-SR04).mcu_breakout_board/: Schematic and routed PCB layout files for an ESP32 breakout board.power_dist_box/: Placeholder directory for the power distribution board task. (Haven't completed as of Jul 7th)src/kratos_shlok: Node setup assignment with publisher and subscriber nodes, dealing in randomised data, using builtin message types.src/kratos_shlok2 & src/kratos_shlok_msgs: Node setup assignment with publisher and subscriber nodes, dealing in custom message types, using a custom message package.src/arm_humble: Robot arm controller using FKIK principles.src/week4_rover_control: Rover control node using double-Ackermann steering.| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5 |
| 4 | LED | LED_THT:LED_D3.0mm | D1, D2, D3, D4 |
| 3 | SW_SPDT | Button_Switch_THT:SW_Slide_SPDT_Straight_CK_OS102011MS2Q | SW1, SW2, SW3 |
| 1 | 2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | Conn_01x02_Pin | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J2 |
| 1 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | ESP32-S3-DevKitC | PCM_Espressif:ESP32-S3-DevKitC | U1 |
| 1 | MPU6050breakout | mpuBreakout:MPU6050breakout | U2 |
| 1 | ServoFL | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | ServoFR | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | ServoRL | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | ServoRR | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | ~ | hcsr04Breakout:hcsr04Breakout | U4 |

willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels

jazzmonger/Traeger-PID-Controller
Traeger Smoker/Grill Controller based on an

ohasanov-hbrw/tribit32-advanced
A tri-microcontroller, overengineered GameBoy Advance clone. More value was given to the controls and the exterior look, which is cool!



FIPATECH/CDFR26_PAMI
Open source firmware and PCB for a differential mobile robot (PAMI) based on ESP32-S3 - Coupe de France de Robotique

dnhutchins/ETC_Express_Reverse_Eng
The ultimate goal of this work is to develop an interface to use the control surface from a legacy ETC Express 24/48 lighting controller as a modern EOSNomad compatible programming and fader wing.

heckler/esphome-device-configs
Configuration definitions for local ESPHome files
It measures 96.5 × 93 mm and has 2 copper layers, 1.6 mm thick.
23 parts, built around the ESP32-S3-DEVKITC-1-N8. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Shlol762/Shlok_EnC_Inductions repository on GitHub, at the commit this page was made from: the board is PCB/mcu_breakout_board/esp32-breakout.kicad_pcb and its schematic PCB/mcu_breakout_board/esp32-breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Shlol762 before reusing the design.