Skip to the content
2 layers64.5 × 71.8 mmEsp rs485 modbus, the printed circuit board in 3D

UART to RS-485 communication using ESP32 and ESP-IDF, designed for reliable industrial and IoT serial data transfer.

Size
64.5 × 71.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
31
Nets
49
Pads
126
Tracks, vias
262, 32
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
18 Dec 2025
Updated
18 Dec 2025

Overview

Esp rs485 modbus is an open-source printed circuit board by Shakir555, from the Shakir555/ESP32-CommBridge-485 repository on GitHub. It is a 2-layer board of 64.5 × 71.8 mm with 31 parts on 49 nets, routed with 262 tracks and 32 vias.

It is built around the ESP32-WROOM-32D and MAX485ED. Its parts include 14 resistors, 9 connectors, 2 capacitors, 2 ICs and 2 diodes. It belongs with the interfaces and adapters boards and the ESP32 boards of this library.

Main components

2

Parts

31
QtyValueFootprintReferences
710kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR2, R3, R4, R5, R6, R7, R11
6Conn_01x02_PinConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ2, J3, J4, J5, J9, J10
3Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ1, J6, J12
2150Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR13, R14
220kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR8, R9
2SW_PushButton_Switch_THT:SW_TH_Tactile_Omron_B3F-100xSW1, SW2
10.1ufCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1
110ufCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC2
1120Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR10
11kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1
1220Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR15
1ESP32-WROOM-32DRF_Module:ESP32-WROOM-32DU3
1LEDLED_THT:LED_Rectangular_W3.0mm_H2.0mmD2
1LED_RKGBLED_THT:LED_D5.0mm-4_RGB_Wide_PinsD1
1MAX485MAX485:DIL08U1

Similar boards

  • 2 layers114.2 × 97.5 mmPlantMonitor v102, the printed circuit board in 3D

    PlantMonitor v102

    MathewNhari/KiCad

    Schematics for the plant monitoring systems

    51 parts
  • 2 layersDMXSwitchpack, the printed circuit board in 3D

    DMXSwitchpack

    schmoizz/DMXSwitchpack

    This project includes the PCB and Firmware to build a DIY DMX Switchpack

    48 parts
  • 2 layers63 × 46 mmPi485, the printed circuit board in 3D

    Pi485

    bvarner/pi485

    An open-source TTL UART <-> RS485 converter, intended for a Raspberry Pi or Arduino

    31 parts41MIT
  • 2 layers150 × 50 mmEsp32-led smps, the printed circuit board in 3D

    Esp32-led smps

    lucysrausch/esp32-led-smps

    230V main LED smps. 2x30W Constant Current.

    179 parts30
  • 4 layers96 × 172 mmServo cpu, the printed circuit board in 3D

    Servo cpu

    wiciu15/servo2

    Servo inverter for 3-phase AC motor with/out encoder feedback

    167 parts29
  • 2 layers60 × 30 mmScoring table hardware, the printed circuit board in 3D

    Scoring table hardware

    GrappleRobotics/JMS

    Another alternative field management system for the FIRST Robotics Competition.

    30 parts18
  • 2 layers68.6 × 53.3 mmXyloShield, the printed circuit board in 3D

    XyloShield

    StefanKrupop/XyloShield

    Shield for Arduino that hosts a RFM26W radio module and allows DMX-512 connectivity

    19 parts17

Questions

How big is the Esp rs485 modbus PCB?

It measures 64.5 × 71.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Esp rs485 modbus use?

31 parts, built around the ESP32-WROOM-32D and MAX485ED. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Esp rs485 modbus KiCad files?

From the Shakir555/ESP32-CommBridge-485 repository on GitHub, at the commit this page was made from: the board is Hardware/v1.0.0/esp_rs485_modbus.kicad_pcb and its schematic Hardware/v1.0.0/esp_main.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Esp rs485 modbus design in my own project?

Its repository states no licence, so its author keeps all rights: ask Shakir555 before reusing the design.