
Relatively Universal ROM Programmer
AndersBNielsen/Relatively-Universal-ROM-Programmer
Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.

The PCB was designed using KiCad to interface the ultrasonic sensor with the Arduino board and provide output through an LED indicator. The system measures the distance between the sensor and an object and triggers an LED when the object is within a predefined range.
ARDUINO PARKING SENSOR PCB is an open-source printed circuit board by ShivbalaramN, from the ShivbalaramN/Arduino-Ultrasonic-Distance-Sensor-PCB repository on GitHub. It is a 2-layer board with 8 parts on 34 nets, routed with 31 tracks and 0 vias.
It is built around the ARDUINO UNO R3. Its parts include 2 connectors, 1 resistor and 1 diode. It belongs with the sensors and measurement and interfaces and adapters boards and the AVR (ATmega, ATtiny) boards of this library.
Arduino Ultrasonic Distance Sensor PCB
📌 Project Overview
This project presents a custom PCB design for an ultrasonic distance measurement system using an Arduino Uno and the HC-SR04. The PCB was designed using KiCad to interface the ultrasonic sensor with the Arduino board and provide output through an LED indicator. The system measures the distance between the sensor and an object and triggers an LED when the object is within a predefined range.
⚙️ Features
Ultrasonic distance measurement
LED indication for nearby objects
Custom PCB designed in KiCad
Simple and low-cost hardware implementation
Beginner-friendly embedded system project
🧩 Components Used
Arduino Uno HC-SR04 LED Resistor (220Ω) Power input connector PCB designed using KiCad
🔌 Pin Connections ** Component ** ** Arduino Pin** VCC 5V GND GND TRIG D9 ECHO D10 LED D7
🖥️ Software Used
KiCad – PCB design
Arduino IDE – Code development
📂 Project Structure
Arduino-Ultrasonic-PCB │ ├── Schematic ├── PCB_Layout ├── Gerber_Files ├── Arduino_Code └── README.md
🚀 Applications Obstacle detection
Distance measurement systems
Robotics projects
Smart parking systems
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | LOGO | LOGO | G***, G*** |
| 1 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | Arduino_UNO_R3 | Module:Arduino_UNO_R3 | A1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | LED | LED_THT:LED_D5.0mm | D1 |
| 1 | POWER INPUT | Connector_Phoenix_MC_HighVoltage:PhoenixContact_MCV_1,5_2-G-5.08_1x02_P5.08mm_Vertical | J2 |
| 1 | ULTRASONIC SENSOR | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |

AndersBNielsen/Relatively-Universal-ROM-Programmer
Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.

AlanFord/self-balancing-stick
Dual Axis Reaction Wheel Inverted Pendulum

Edging-Machines/Edging-Machines
This repository is intended to contain as much information as possible about building, designing, prototyping, and using automated edging machines.

PedroCNeves/AC_ChargingStation
A learning project to create an EV AC Charging station based on an Arduino Uno

jonsag/arduTester
An arduino component tester based on https://create.arduino.cc/projecthub/plouc68000/ardutester-v1-13-the-arduino-uno-transistor-tester-dbafb4


ICRS/101
The all-new open source Robotics 101 course from ICRS. It's specifically designed to be run in hackspaces, after school clubs and university societies.

8 parts, built around the ARDUINO UNO R3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ShivbalaramN/Arduino-Ultrasonic-Distance-Sensor-PCB repository on GitHub, at the commit this page was made from: the board is ARDUINO PARKING SENSOR PCB.kicad_pcb and its schematic ARDUINO PARKING SENSOR PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ShivbalaramN before reusing the design.