2 layers124.5 × 57.8 mm
ArduTesterMiniPro
jonsag/arduTester
An arduino component tester based on https://create.arduino.cc/projecthub/plouc68000/ardutester-v1-13-the-arduino-uno-transistor-tester-dbafb4
16 parts14
2 layers113.7 × 61 mm
ArduTester SMD
jonsag/arduTester14An arduino component tester based on https://create.arduino.cc/projecthub/plouc68000/ardutester-v1-13-the-arduino-uno-transistor-tester-dbafb4
- Size
- 113.7 × 61 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 36
- Pads
- 89
- Tracks, vias
- 161, 0
- Pours
- 72
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 7 Feb 2021
- Updated
- 31 Mar 2025
Overview
ArduTester SMD is an open-source printed circuit board by jonsag, from the jonsag/arduTester repository on GitHub. It is a 2-layer board of 113.7 × 61 mm with 17 parts on 36 nets, routed with 161 tracks and 0 vias.
It is built around the ARDUINO UNO R3. Its parts include 8 resistors, 3 connectors, 2 switches, 1 capacitor and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdarduTester
An arduino component tester based on this
Prerequisites
$ sudo apt install make git $ sudo apt install avr-libc avrdude gcc-avr subversion
Download sources
$ svn checkout svn://mikrocontroller.net/transistortester
or
$ git clone https://github.com/svn2github/transistortester
- Copy the makefile from the folder of this lcd to the default (it may not necessary and can be built in it's original location)
$ cp transistortester/Software/trunk/ST7735/Makefile transistortester/Software/trunk/default/
- Go to the default directory
$ cd transistortester/Software/trunk/default
-
Edit the Makefile and change the programmer setting
PROGRAMMER=usbtiny
-
Build and upload the code
$ make $ make upload
Hardware
ATmega328
Pin no ->
1 -> Reset
2 -> D0
3 -> D1
4 -> D2 -> LCD pin 14
5 -> D3 -> LCD pin 13
6 -> D4 -> LCD pin 12
7 -> Vcc -> Vcc
8 -> GND -> GND
9 -> Crystal
10 -> Crystal
11 -> D5 -> LCD pin 11
12 -> D6 -> LCD pin 6
13 -> D7 -> LCD pin 4
14 -> D8 -> TP1 680R
15 -> D9 -> TP1 470k
16 -> D10 -> TP2 680R
17 -> D11 -> TP2 470k
18 -> D12 -> TP3 680R
19 -> D13 -> TP3 470k
20 -> Vcc -> Vcc
21 -> Aref
22 -> GND -> GND
23 -> A0 -> TP1
24 -> A1 -> TP2
25 -> A2 -> TP3
26 -> A3 -> Test button
27 -> A4
28 -> A5
Atmega-transistor-tester
Atmega-transistor-tester is based on wagiminator's ATmega-Transistor-Tester, which in turn is based on the original project.
Software
Current sources can be found at Mikrocontroller-net's github page
$ git clone https://github.com/Mikrocontroller-net/transistortester.git
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 470k | My_Misc:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal_larger_pads | R3, R5, R7 |
| 3 | 680R | My_Misc:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal_larger_pads | R2, R4, R6 |
| 2 | 3-pin_test_header | My_Headers:3-pin_test_header_large | J1, J3 |
| 1 | 10k | My_Misc:Potentiometer_Piher_PT-6-V_Vertical_larger_pads | RV1 |
| 1 | 10k | My_Misc:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal_larger_pads | R8 |
| 1 | 1n | My_Misc:C_Disc_D3.0mm_W1.6mm_P2.50mm_larg | C1 |
| 1 | 2-pin_power_input_header | My_Headers:2-pin_power_input_header | J2 |
| 1 | 220R | My_Misc:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal_larger_pads | R1 |
| 1 | Arduino_UNO_R3 | My_Arduino:Arduino_UNO_R3_shield_large | A1 |
| 1 | LCD_HD44780 | My_Parts:LCD_HD44780_16x2_w_headers_large | U1 |
| 1 | SW_Push | My_Misc:SW_PUSH-12mm_large | SW1 |
| 1 | SW_Push | My_Misc:SW_PUSH_6mm_large | SW2 |
More from jonsag/arduTester
1Similar boards
- 2 layers68.8 × 53.6 mm
Relatively Universal ROM Programmer
AndersBNielsen/Relatively-Universal-ROM-Programmer
Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.
149 parts257GPL-3.0 - 2 layers69.1 × 53.8 mm
Motor controller
AlanFord/self-balancing-stick
Dual Axis Reaction Wheel Inverted Pendulum
25 parts79MIT - 2 layers68.6 × 53.3 mm
Protogasm Board V2
Edging-Machines/Edging-Machines
This repository is intended to contain as much information as possible about building, designing, prototyping, and using automated edging machines.
14 parts67MIT - 2 layers53.8 × 69.6 mm
EVSE V2 2
PedroCNeves/AC_ChargingStation
A learning project to create an EV AC Charging station based on an Arduino Uno
32 parts50 - 4 layers65.9 × 52.9 mm
- 4 layers68.6 × 53.3 mm
101 PCB
ICRS/101
The all-new open source Robotics 101 course from ICRS. It's specifically designed to be run in hackspaces, after school clubs and university societies.
89 parts10CC-BY-4.0 - 2 layers53.3 × 68.3 mm
- 4 layers65.9 × 52.7 mm
Motor shield
DCC-EX/EX-Hardware
Open Source hardware projects developed by the DCC-EX Team
123 parts7CERN-OHL-W-2.0
Questions
How big is the ArduTester SMD PCB?
It measures 113.7 × 61 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ArduTester SMD use?
17 parts, built around the ARDUINO UNO R3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ArduTester SMD KiCad files?
From the jonsag/arduTester repository on GitHub, at the commit this page was made from: the board is KiCAD/arduTester-SMD/arduTester-SMD.kicad_pcb and its schematic KiCAD/Atmega-Transistor-Tester/ATmega328.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ArduTester SMD design in my own project?
Its repository states no licence, so its author keeps all rights: ask jonsag before reusing the design.