
Rugged pico
rallekralle11/Dact-pico
Pin-compatible with the pi pico but with many protective features.

RP2040-based board in the shape of the Arduino uno
Anac 2040 is an open-source printed circuit board by rallekralle11, from the rallekralle11/Anna2040 repository on GitHub. It is a 2-layer board of 53.3 × 68.3 mm with 63 parts on 68 nets, routed with 659 tracks and 47 vias.
It is built around the RP2040, ARDUINO UNO R3 and AP63203WU, with the W25Q16JVSSIQ among its other parts. Its parts include 19 capacitors, 17 resistors, 5 diodes, 4 ICs and 4 connectors. It belongs with the RP2040 and AVR (ATmega, ATtiny) boards of this library.

Similar feature set to the Raspberry pi pico in the classic uno shape.
USB-C
2MB flash memory
all IO pins available
proper analog voltage reference
3,8-32V buck converter with:
lossless reverse polarity protection on the power inputs
data line ESD protection
USB power fuse
LEDs on both pin 13 and 25 as on the uno and pico
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100nf | Capacitor_SMD:C_0402_1005Metric | C4, C5, C7, C8, C9, C10, C11, C12, C13, C16 |
| 3 | 100kΩ | Resistor_SMD:R_0402_1005Metric | R3, R6, R9 |
| 3 | 2,2µf | Capacitor_SMD:C_0402_1005Metric | C6, C14, C15 |
| 3 | 470Ω | Resistor_SMD:R_0402_1005Metric | R10, R11, R12 |
| 2 | 10kΩ | Resistor_SMD:R_0402_1005Metric | R8, R17 |
| 2 | 1kΩ | Resistor_SMD:R_0402_1005Metric | R1, R4 |
| 2 | 20pf | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 22µf | Capacitor_SMD:CP_Elec_4x4.5 | C18, C19 |
| 2 | 27Ω | Resistor_SMD:R_0402_1005Metric | R13, R14 |
| 2 | 5,1kΩ | Resistor_SMD:R_0402_1005Metric | R15, R16 |
| 2 | PJA3432AU | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mm | SW1, SW2 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2 |
| 2 | Varistor | Resistor_SMD:R_0402_1005Metric | RV1, RV2 |
| 1 | 10µf | Capacitor_SMD:CP_Elec_4x4.5 | C17 |
| 1 | 1nf | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | 200kΩ | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 2kΩ | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 3,9µH | Inductor_SMD:L_Bourns_SRN6045TA | L1 |
| 1 | 5,6kΩ | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | AP63203WU | Package_TO_SOT_SMD:TSOT-23-6 | U4 |
| 1 | Arduino_UNO_R3 | Module:Arduino_UNO_R3 | A1 |
| 1 | Barrel_Jack_MountingPin | Connector_BarrelJack:BarrelJack_Horizontal | J6 |
| 1 | Conn_01x09 | Connector_PinSocket_2.54mm:PinSocket_1x09_P2.54mm_Vertical | J5 |
| 1 | Crystal_Small | Crystal:Crystal_SMD_7050-2Pin_7.0x5.0mm | Y1 |
| 1 | D_Small | Diode_SMD:D_SOD-323 | D1 |
| 1 | Debug | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J10 |
| 1 | Jumper | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | LED_GREEN | LED_SMD:LED_0402_1005Metric | D2 |
| 1 | LED_GREEN_PWR | LED_SMD:LED_0402_1005Metric | D4 |
| 1 | LED_YELLOW | LED_SMD:LED_0402_1005Metric | D3 |
| 1 | LM4040DBZ-3 | Package_TO_SOT_SMD:SOT-23 | U3 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | USB_C_Receptacle_USB2.0 | USB-C-Connectors-master:TYPE-C-31-M-12 | J7 |
| 1 | W25Q16JVSSIQ | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U2 |
| 1 | ~7v Zener | Diode_SMD:D_SOD-323 | D5 |
The 62 most common of 63 parts.

rallekralle11/Dact-pico
Pin-compatible with the pi pico but with many protective features.

FujiNetWIFI/fujinet-hardware
Schematics and design files for FujiNet hardware



ShawnHymel/rpi-pico-debugger-shoe
Stackable debugger board for the Raspberry Pi Pico. Solder long headers to this debugger board in order to connect the Pico to it.



Misaka0x2730/MioLink
ARM JTAG/SWD debugger (BlackMagic port) based on RP2040.
It measures 53.3 × 68.3 mm and has 2 copper layers, 1.6 mm thick.
63 parts, built around the RP2040, ARDUINO UNO R3, AP63203WU and W25Q16JVSSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the rallekralle11/Anna2040 repository on GitHub, at the commit this page was made from: the board is anac_2040.kicad_pcb and its schematic anac_2040.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask rallekralle11 before reusing the design.