Skip to the content

Interfaces and adapters

7,328 boards
  • 4 layers65 × 56.5 mmROV PCIE USB HUB FINAL, the printed circuit board in 3D

    ROV PCIE USB HUB FINAL

    samnadol/ROV_PCIe_USB_HUB

    up-to-16 port USB hub + PCIe host controller "hat" for Pi 5

    171 parts
  • 6 layers98.9 × 81.4 mmEthernetSwitch, the printed circuit board in 3D

    EthernetSwitch

    SamuelCicuitStudio/LAN9645-STM32-Managed-Ethernet-Switch

    Managed Ethernet switch platform built around the LAN9645 and STM32H743, featuring copper and SerDes ports, SPI management, RMII, LwIP, and a USB diagnostic CLI.

    231 parts
  • 4 layers41.2 × 32.6 mmUsb2uart kicad, the printed circuit board in 3D

    Usb2uart kicad

    samvangysegem/usb2uart-hardware

    CH344-based USB-to-UART converter

    49 parts
  • 2 layers55 × 43.5 mmL298 Motor Driver, the printed circuit board in 3D

    L298 Motor Driver

    Sandeeksha/L293-Motor-Driver

    This project contains the schematic and PCB layout files for a basic L293D Motor Driver Module. The design uses the L293D H-Bridge IC to control two DC motors independently in both forward and reverse directions.

    8 parts
  • 2 layers68.6 × 53.3 mmUnoProgrammers, the printed circuit board in 3D

    UnoProgrammers

    Sanjit1/Attiny2x4x8x-Programmers

    Programmers for Attinies

    22 partsMIT
  • 2 layers71.8 × 25.2 mmLevelshift tunable ahct, the printed circuit board in 3D

    Levelshift tunable ahct

    saratoga4/levelshift_tunable_ahct

    A universal level shifter for driving different types of cable

    12 parts
  • 2 layers100 × 50 mmEbus adapter, the printed circuit board in 3D

    Ebus adapter

    sarfata/ebus-adapter

    This is a read/write adapter for eBus heating bus. It can be connected to a USB-serial adapter (3.3V or 5V) - or to a Particle Photon.

    32 parts
  • 2 layers50.8 × 22.9 mmWorkbench power interface, the printed circuit board in 3D

    Workbench power interface

    Sarkis-S/Embedded_Workstation

    markdown ## Perfboard Design & Lessons Learned

    7 parts
  • 2 layers64.9 × 38.1 mmMSPM0L1105 Dev Board, the printed circuit board in 3D

    MSPM0L1105 Dev Board

    sarthakchikte0312/MSPM0L1105_Dev_Board

    Custom MSPM0L1105 development board designed in KiCad with USB, UART, SWD, and GPIO support.

    50 parts
  • 4 layers94 × 81.8 mmESP32 IO Controller, the printed circuit board in 3D

    ESP32 IO Controller

    Satya777777/ESP32-Industrial-IO-Controller

    4-layer ESP32-based industrial I/O controller designed in KiCad with 0–10 V, 4–20 mA, RS485, USB-C and relay interfaces.

    58 partsMIT
  • 2 layers10.7 × 10 mmSBK NFET1, the printed circuit board in 3D

    SBK NFET1

    sbarabe/SBK_FET1

    Logic-level N-channel and P-channel MOSFET modules for education, breadboarding, and prototyping.

    4 partsCERN-OHL-P-2.0
  • 4 layers60 × 60 mmATmega TMC2209 Driver, the printed circuit board in 3D

    ATmega TMC2209 Driver

    sbbxiii/The-Armadillo

    The Armadillo: Custom Arduino-compatible ATmega328P stepper motor controller PCB with Trinamic TMC2209 silent driver and single-wire UART

    52 partsMIT
  • 2 layers55.5 × 24 mmOdrive diff spi breakout, the printed circuit board in 3D

    Odrive diff spi breakout

    sburden-group/pareto_leg_hardware

    hardware repo for pareto-optimal jumping robot leg proof-of-concepts

    19 partsMIT
  • 2 layers28.6 × 33.9 mmENS light sw board, the printed circuit board in 3D

    ENS light sw board

    Scaniox/ENS_light_sw_board

    it's a breakout board for some coursework

    17 parts
  • 2 layers35.6 × 43.2 mmSTM32F030K6Tx Breakout, the printed circuit board in 3D

    STM32F030K6Tx Breakout

    schilkp/STM32F030K6Tx_Breakout

    A very simple breakout board for the STM32F030K6Tx MCU.

    31 partsMIT
  • 2 layers76 × 50.8 mmDropbot v3-connection adapter, the printed circuit board in 3D

    Dropbot v3-connection adapter

    sci-bots/dropbot-v3-connection-adapter.kicad

    This adapter allows you to breakout the signals from a DropBot v3's pogo pins.

    142 parts
  • 4 layers69.5 × 42 mmBuck converter breakout, the printed circuit board in 3D

    Buck converter breakout

    scottchen10/buck_converter_breakout

    MIC24066 Buck Converter Breakout Board for the Toronto Met. Robotics Team

    44 parts
  • 2 layers20.3 × 15.2 mm23LC512-Breakout, the printed circuit board in 3D

    23LC512-Breakout

    Scottz0r/23LC512-Breakout

    Breakout board for the 23LC512 SPI SRAM chip

    7 parts
  • 2 layers20.4 × 64.5 mmJoule thief breakout boards, the printed circuit board in 3D

    Joule thief breakout boards

    sdp8483/joule_thief_breakout_boards

    Breakout Boards for Joule Thief Development

    40 parts
  • 2 layers42 × 32 mmAZ1 Series Breakout, the printed circuit board in 3D

    AZ1 Series Breakout

    sdp8483/Newhaven_Display_AZ1_Breakout

    Breakout PCB for Newhaven Display NHD-C12831A1Z

    17 partsMIT
  • 6 layers24.4 × 35.6 mmRFM69HCW Breakout, the printed circuit board in 3D

    RFM69HCW Breakout

    sdsmt-robotics/electrical-resources

    Migrated from GitLab: sdmines/clubs/rocker-robotics/electrical-resources/hardware-design-rules

    42 parts
  • 2 layersESP Programmer, the printed circuit board in 3D

    ESP Programmer

    se1exin/ESP8266-Programmer-Board

    Requires USB UART Breakout - https://www.sparkfun.com/products/13830

    9 parts