

Buck converter breakout
MIC24066 Buck Converter Breakout Board for the Toronto Met. Robotics Team
- Size
- 69.5 × 42 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 44
- Nets
- 25
- Pads
- 129
- Tracks, vias
- 188, 38
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 15 Jun 2026
- Updated
- 1 Jul 2026
Overview
Buck converter breakout is an open-source printed circuit board by scottchen10, from the scottchen10/buck_converter_breakout repository on GitHub. It is a 4-layer board of 69.5 × 42 mm with 44 parts on 25 nets, routed with 188 tracks and 38 vias.
It is built around the FQP47P06. Its parts include 16 capacitors, 12 resistors, 2 diodes, 2 transistors and 2 connectors. It belongs with the power and interfaces and adapters boards of this library.
Main components
1README
README.mdMIC24066 Buck Converter Breakout
A simple breakout board for the Microchip MIC24066 synchronous buck converter designed in KiCad.
This was a learning project so there may be many improvements that are possible.
3D View


Schematic
PCB Layout
Top Layer

Bottom Layer

Parts
44| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 47u | Capacitor_SMD:C_1210_3225Metric | C7, C8, C9, C10, C11 |
| 4 | M3 | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad | MH1, MH2, MH3, MH4 |
| 3 | 100k | Resistor_SMD:R_0603_1608Metric | R3, R9, R11 |
| 3 | 4u7 | Capacitor_SMD:C_1210_3225Metric | C1, C2, C3 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R5 |
| 2 | 47u | Capacitor_SMD:CP_Elec_6.3x7.7 | C4, C12 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 0u1 | Capacitor_SMD:C_0201_0603Metric | C5 |
| 1 | 0u1 | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | 15k | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 1n0 | Capacitor_SMD:C_0603_1608Metric | C16 |
| 1 | 2n2 | Capacitor_SMD:C_0402_1005Metric | CSS1 |
| 1 | 2u2 | Capacitor_SMD:C_0201_0603Metric | C15 |
| 1 | 3.3uH | Inductor_SMD:XGL6060-332MEC | L1 |
| 1 | 43k | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 47n | Capacitor_SMD:C_0402_1005Metric | C13 |
| 1 | 4u7 | Capacitor_SMD:C_01005_0402Metric | C14 |
| 1 | 505 | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 5k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 5k | Potentiometer_SMD:Potentiometer_Bourns_3314J_Vertical | R10 |
| 1 | D_Zener | Diode_SMD:D_SOD-323 | D1 |
| 1 | FQP47P06 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | Q2 |
| 1 | Input Connector | Connector_AMASS:AMASS_XT60-F_1x02_P7.20mm_Vertical | J1 |
| 1 | LED | Capacitor_SMD:C_0805_2012Metric | D2 |
| 1 | M3 VIN | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | TP1 |
| 1 | M3 VOUT | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | TP2 |
| 1 | MIC24066T-E/QNA | Converter_DCDC:VQFN36_QNA_MCH | U1 |
| 1 | NMOS | Package_TO_SOT_SMD:SOT-23-3 | Q1 |
| 1 | NetTie_2 | NetTie:NetTie-2_SMD_Pad0.5mm | NT1 |
| 1 | Output Connector | Connector_AMASS:AMASS_XT60-F_1x02_P7.20mm_Vertical | J2 |
Similar boards
- 2 layers100 × 50 mm

- 2 layers50 × 50 mm

- 2 layers100 × 100 mm

Row driver
CarlRaymond/AnnaxFlipdotDriver
KiCad project for drivers for Annax flip-dot display panels
80 parts44 - 2 layers38.9 × 16.4 mm

Release serial i2c atmega328p switch
waynepiekarski/hydro-modem
HydroModem: Underwater Bell 103 modem implementation for low-power microcontrollers
34 parts3GPL-3.0 - 2 layers76.6 × 21.5 mm

Power Breakout
EmbeddedDesign/GotT-Translation-Circuit
A Bluetooth voice modulator for Dalek speech
18 parts2MIT - 2 layers145 × 122.8 mm

- 2 layers65.4 × 66.8 mm

- 4 layers49 × 30 mm

Questions
How big is the Buck converter breakout PCB?
It measures 69.5 × 42 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Buck converter breakout use?
44 parts, built around the FQP47P06. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Buck converter breakout KiCad files?
From the scottchen10/buck_converter_breakout repository on GitHub, at the commit this page was made from: the board is buck_converter_breakout.kicad_pcb and its schematic buck_converter_breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Buck converter breakout design in my own project?
Its repository states no licence, so its author keeps all rights: ask scottchen10 before reusing the design.