2 layers50 × 35 mm
2 layers28.6 × 33.9 mm
ENS light sw board
Scaniox/ENS_light_sw_boardit's a breakout board for some coursework
- Size
- 28.6 × 33.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 14
- Pads
- 50
- Tracks, vias
- 61, 4
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 16 Nov 2024
- Updated
- 5 Jan 2025
Overview
ENS light sw board is an open-source printed circuit board by Scaniox, from the Scaniox/ENS_light_sw_board repository on GitHub. It is a 2-layer board of 28.6 × 33.9 mm with 17 parts on 14 nets, routed with 61 tracks and 4 vias.
Its parts include 8 resistors, 4 diodes, 4 switches and 1 connector. It belongs with the interfaces and adapters and microcontroller boards boards of this library.
README
README.mdA simple breakout board with 4 LEDs and 4 Buttons, designed to help for the ELEC3227 embedded networks coursework. component choices are so that it is as cheap as possible from JLC PCB's PCBA service
Also see the AVR C library to to interface with it easily: https://github.com/Scaniox/ENS_light_sw_board_C_library
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4 |
| 4 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R7, R8 |
| 4 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3, D4 |
| 4 | SW_SPST | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW1, SW2, SW3, SW4 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J1 |
Similar boards
- 2 layers139.7 × 62.2 mm
- 2 layers29.2 × 55.9 mm
Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
17 parts1kGPL-3.0 - 2 layers24.5 × 36.5 mm
- 2 layers56.3 × 55.7 mm
StarNecklace
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
17 parts915 - 2 layers25 × 25 mm
SmallEncoder
DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…
17 parts498MIT - 2 layers38.9 × 16.1 mm
- 2 layers36 × 51 mm
Questions
How big is the ENS light sw board PCB?
It measures 28.6 × 33.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ENS light sw board use?
17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ENS light sw board KiCad files?
From the Scaniox/ENS_light_sw_board repository on GitHub, at the commit this page was made from: the board is ENS_light_sw_board.kicad_pcb and its schematic ENS_light_sw_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ENS light sw board design in my own project?
Its repository states no licence, so its author keeps all rights: ask Scaniox before reusing the design.