
Interfaces and adapters
7,328 boards- 2 layers18 × 35.5 mm

- 2 layers23.3 × 20 mm

- 2 layers110.3 × 110.3 mm

H Bridge PCB
reinto1234/H_Bridge_PCB
The project consists of two main components: 1. HBridgePCBDesign — KiCad PCB layout and schematic. 2. HBridgePCBCode — Firmware for the ESP32 controller.
124 parts - 2 layers75 × 54 mm

Gree bridge
reparationchlorinateur/gree-bridge
ESP32-S3 board that goes inside a mini-split indoor unit, for Home Assistant and Apple Home (Matter). IR control and wall-remote feedback through the unit's own IR receiver line (most brands); indoor/outdoor bus readout…
51 parts - 4 layers79.9 × 65.2 mm

Ethernet Dev Board
ResonanceGroup/ESP32_Ethernet_Dev_Board
Small dev board for the ESP32 that is meant to incorporate ethernet controller for testing
116 partsMIT - 2 layers301.9 × 194.8 mm

TRS80 Model I EI RevD
RetroStack/TRS-80-Model-I-Expansion-Interface-Rev-D
Hardware Replica of the TRS-80 Model I Expansion Interface - Revision D
185 partsMIT - 4 layers66.2 × 30.9 mm

- 2 layers60 × 30 mm

G4-tb
rezzm3ister/stm32g474-testboard
a simple breakout testboard with integrated uart for stm32g474RBT3
39 parts - 2 layers221.5 × 150.5 mm

Triple Half Bridge Driver v4a
rhysyim/Electronic-Speed-Controller
Electronic Speed Controller of Brushless DC Motor
342 parts - 4 layers50.5 × 38.5 mm

Breakout board imu
riccardo-ops/IMU_BREAKOUT_BOARD
Breakout board for IMU and barometer in Kicad 8
23 parts - 2 layers99 × 105 mm

STM32 IOT GATEWAY
RiddheshVeling/Industrial-Flowmeter-Totalizer-with-Modbus-based-HMI-and-Data-Logging
EXTC Final year project: Industrial flowmeter totalizer with Modbus-based HMI for real-time monitoring and data logging using STM32 and RS485.
154 parts - 6 layers110 × 96 mm

Assembly preview
ripclap/rm520n-carrier
KiCad RM520N-GL carrier with 2.5 GbE, passive PoE, dual SIM interfaces and independent LoRa management.
446 partsCERN-OHL-P-2.0 - 2 layers54 × 24.6 mm

Nano
riteshh27/arduino-nano-clone
KiCad project for an Arduino Nano clone (ATmega328P + FT232RL USB-serial)
33 parts - 4 layers100 × 100 mm

Kvm switch
Rithvik-Vadlamani/kvm-switch
Four-layer HDMI/USB KVM design with STM32 firmware, supply supervision, and verification evidence
170 parts - 4 layers49 × 24 mm

STM32 BLUETOOTH HARDWARE DESIGN
riyassadiq11/STM32_Bluetooth_Hardware_Design_PCB
4‑layer PCB (49 × 24 mm, 1.6 mm) using STM32WB55CEU6 for Bluetooth. Features USB‑C with ESD protection, RF + U.FL antenna, SWD debug header, and SMPS power.
48 partsMIT - 2 layers94 × 61 mm

- 2 layers43.8 × 32.6 mm

Stm32
RK200419MA/STM32-Based-Control-Board-PCB-Design
STM32-based control board designed in KiCad, featuring USB programming, SWD debugging, power management, and PCB design following industry best practices.
34 parts - 2 layers120 × 60 mm

CAN interface
rkhvrnen/UDS-logger
A Python script and MCU source code for collecting real-time diagnostic data from control units of a vehicle using UDS over CAN bus.
82 partsMIT - 2 layers75.5 × 24.5 mm

Usb interface
rkiendl/oe2lsp_USB-Interface
primitive and simple USB interfave for classic Ham Radio transceivers. - Brings the TRX to the 21st century and makes the operation of digi modes reliable and easy. - No more cables and adapters - KiCad based
97 partsCC0-1.0 - 2 layers17.4 × 51.4 mm

Retro uart
rkujawa/retro-uart
Retro-fitting 16C750E into DIP socket! For all your retro hardware project needs.
17 partsGPL-3.0 - 2 layers59.7 × 67.9 mm

- 2 layers64 × 24 mm

Open lora com
rmingon/open-lora-com
This project is a compact, embedded hardware system designed to securely transmit data over LoRa. Built around the STM32F103 microcontroller, this system supports real-time SHA encryption, flexible protocol…
36 parts - 2 layers189.9 × 30.5 mm

Eurorack power breakout
robaru/eurorack-power-busboard
Passive Eurorack power busboard: 10 headers, filtering, LEDs, THT. Based on the moPsy Eurorack Power Breakout.
28 partsCC-BY-SA-4.0 - 2 layers218 × 125 mm

EVA1 v2
roberto314/EVA-1_Reproduction
Recreation of the very rare K-K Systems EVA-1 Display Adapter for the Epson HX-20 Computer
160 parts