Skip to the content

Interfaces and adapters

7,328 boards
  • 2 layers25 × 20 mmRotaryDial2Serial, the printed circuit board in 3D

    RotaryDial2Serial

    Qeteshpony/RotaryDial2Serial

    Translate signals from a phone rotary dial to serial data

    14 partsBSD-2-Clause
  • 2 layers74 × 72 mmIso usb2pwrd panel, the printed circuit board in 3D

    Iso usb2pwrd panel

    qfreiman/iso-usb2pwrd

    compact USB-C 2.0 Isolator with 1W Power Passthrough

    204 parts
  • 4 layers6 × 8.4 mmWson adapter, the printed circuit board in 3D

    Wson adapter

    qfreiman/wson-adapter

    WSON8 6x8mm to 6x5mm Adapter PCB

    3 partsUnlicense
  • 2 layers34.9 × 50.9 mmRelay2 adapter, the printed circuit board in 3D

    Relay2 adapter

    Qnzvna/pcb-relay2-module

    12 parts
  • 2 layers14 × 14 mmO12encoder, the printed circuit board in 3D

    O12encoder

    qwertpas/O12encoder

    Compact magnetic encoder PCB for RS485 bus

    17 partsMIT
  • 2 layers12.5 × 12.5 mmO12imu, the printed circuit board in 3D

    O12imu

    qwertpas/O12imu

    Compact 6DOF sensor fusion IMU PCB for RS485 bus

    16 partsMIT
  • 4 layers117.5 × 53.4 mmUSB HUB ADAPTER, the printed circuit board in 3D

    USB HUB ADAPTER

    R-Mutura/USB_HUB_ADAPTER

    usb hub adapter 4 layer

    324 parts
  • 2 layers44.9 × 45 mmAdapter, the printed circuit board in 3D

    Adapter

    Radiometria-UFCG/e-Callisto

    29 partsMIT
  • 4 layers140.3 × 129 mmPec, the printed circuit board in 3D

    Pec

    Raduas/STM32-furnace

    Home project to create H-bridge resonant induction furnace

    128 partsApache-2.0
  • 4 layers55.5 × 41.5 mmGPSM9N, the printed circuit board in 3D

    GPSM9N

    Raetti/GPSM9N_PCB

    u-blox NEO-M9N GNSS Receiver Breakout PCB (KiCad 10)

    13 parts
  • 2 layers45.7 × 58.4 mmCanNode, the printed circuit board in 3D

    CanNode

    Raggii/RocketryIgniter

    To design and prototype a dual ignition system that can receive commands over UART and CANBUS. The device must be able to receive commands that arm and fire two separate but identical ignition circuits while also…

    20 parts
  • 2 layers50 × 20 mmCP2102N USB to UART Converter, the printed circuit board in 3D

    CP2102N USB to UART Converter

    RajBari2004/CP2102N-USB-to-UART-Converter

    USB Type-C to UART Interface | CP2102N | Custom PCB | KiCad 9.0

    19 parts
  • 2 layers60 × 56.8 mmAVR Standalone Programmer, the printed circuit board in 3D

    AVR Standalone Programmer

    RandBeyy/Standalone_AVR_Programmer

    A standalone, SD card based programmer for AVR microcontrollers. The device is built around an ATmega328P and programs a target without requiring a computer during normal use.

    45 parts
  • 2 layers54 × 42 mmSib, the printed circuit board in 3D

    Sib

    RangeMaster370/kicad-sensor-interface-board

    SIB-1 sensor-interface board in KiCad

    36 parts
  • 4 layers28.8 × 25.2 mmSwd lh397kic01, the printed circuit board in 3D

    Swd lh397kic01

    ranzbak/c4-mipi-adapter

    C4 to mipi dsi ffc adapter to display types

    22 parts
  • 4 layers65 × 56 mmRPi OLED Adapter, the printed circuit board in 3D

    RPi OLED Adapter

    RasmusB/RPi-OLED

    Adapter board for using a generic OLED with a Raspberry Pi

    35 parts
  • 2 layers99.1 × 52.1 mmSHT41-Sensor Breakout, the printed circuit board in 3D

    SHT41-Sensor Breakout

    raulgr-h/stm32-environmental-data-logger

    STM32-based environmental logger system designed in KiCad, assembled by hand, troubleshot, tested and verified using Digilent Analog Discovery 2 and DMM

    56 parts
  • 2 layers71 × 71 mmTurrismox dsdshu adapter, the printed circuit board in 3D

    Turrismox dsdshu adapter

    RavuAlHemio/turrismox-dsdshu-adapter

    Turris MOX to DSD Tech SH-U Series USB-Serial Adapter

    6 parts
  • 2 layers20.5 × 36.5 mmUSB Battery breakout, the printed circuit board in 3D

    USB Battery breakout

    rblaze/misc-pcbs

    Small PCBs for minor projects: IC adapters, evaluation boards, etc

    33 parts
  • 2 layers74.9 × 95.3 mmStm32 morpho expansion board, the printed circuit board in 3D

    Stm32 morpho expansion board

    rebma-io/homerack_breakout

    A breakout board for STM32 NUCLEO64 boards using the Morpho connectors

    25 partsCC0-1.0
  • 6 layers55 × 20 mmUSB to GB Ethernet, the printed circuit board in 3D

    USB to GB Ethernet

    Recepkoca/USB_to_GB_Ethernet

    6-layer USB 2.0 to Gigabit Ethernet module (LAN7500) — validated at ~350 Mbps, production-ready KiCad design with fabrication files

    102 parts
  • 4 layers40 × 55.5 mmSTMPill, the printed circuit board in 3D

    STMPill

    Reekoru/STM32WB55REV6_Board

    A dev board for STM32WB55REV6 that includes RF for Bluetooth / LE, Thread, & Zigbee. Includes GPIO ports, ST-Link via TC2030 by Tag Connect, and USB-UART

    69 parts