4 layers50 × 22.9 mm
4 layers6 × 8.4 mm
Wson adapter
qfreiman/wson-adapterWSON8 6x8mm to 6x5mm Adapter PCB
- Size
- 6 × 8.4 mm
- Copper layers
- 4
- Thickness
- 0.8 mm
- Parts
- 3
- Nets
- 8
- Pads
- 26
- Tracks, vias
- 36, 9
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 6 Aug 2022
- Updated
- 6 Aug 2022
Overview
Wson adapter is an open-source printed circuit board by qfreiman, from the qfreiman/wson-adapter repository on GitHub, published under the Unlicense licence. It is a 4-layer board of 6 × 8.4 mm with 3 parts on 8 nets, routed with 36 tracks and 9 vias.
It is built around the W25Q32JVZPIQ. Its parts include 1 capacitor, 1 IC and 1 connector. It belongs with the interfaces and adapters boards of this library.
Main components
1README
README.mdwson-adapter
WSON8 6x8mm to 6x5mm Adapter PCB
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 0.1uF | wson-adapter:C_0201_0603Metric | C1 |
| 1 | W25Q32JVZP | Package_SON:WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4.3mm | U1 |
| 1 | WSON_6x8mm_Pad | wson-adapter:WSON8_6x8mm_Pad | J1 |
Similar boards
- 2 layers43 × 43 mm
- 4 layers42.5 × 32 mm
- 4 layers162.2 × 100 mm
- 4 layers43 × 43 mm
- 2 layers142.7 × 72 mm
Blinky bowtie
joshajohnson/bsidescbr2021
Slides and Design Files for BSides Canberra 2021
101 parts5GPL-3.0 - 2 layers51.3 × 16.3 mm
- 4 layers36.8 × 52.1 mm
RP2040
rishikesh2715/RP2040-Motion-Sense-Board
A microcontroller PCB based on the RP2040 MCU from Raspberry Pi with a on-board high performance IMU, 2S LiPo battery charging circuit, 32 MB quad SPI flash memory, and bunch of GPIO breakouts.
73 parts4MIT
Questions
How big is the Wson adapter PCB?
It measures 6 × 8.4 mm and has 4 copper layers, 0.8 mm thick.
What parts does the Wson adapter use?
3 parts, built around the W25Q32JVZPIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Wson adapter KiCad files?
From the qfreiman/wson-adapter repository on GitHub, at the commit this page was made from: the board is wson-adapter.kicad_pcb and its schematic wson-adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Wson adapter design in my own project?
Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).