
Module pcb
joshajohnson/bsidescbr2021
Slides and Design Files for BSides Canberra 2021

Slides and Design Files for BSides Canberra 2021
Blinky bowtie is an open-source printed circuit board by joshajohnson, from the joshajohnson/bsidescbr2021 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 142.7 × 72 mm with 101 parts on 63 nets, routed with 732 tracks and 160 vias.
It is built around the ATSAMD21G18A-MU, W25Q32JVZPIQ and AP2112K-3.3TRG1, with the MCP73831T-2ACI/OT-HXY, SN74LVC1T45DCK and WS2812B among its other parts. Its parts include 37 capacitors, 25 diodes, 14 resistors, 6 ICs and 4 switches. It belongs with the SAM D and SAM boards of this library.
Slides and Design Files for BSides Canberra 2021
slides-ehd slides for my "Electronic Hardware Design" talk.pcb-ehd design files for my "Electronic Hardware Design" talk.
pcb-ehd/integrated-pcb is the fully integrated bow tie.pcb-ehd/module-pcb is the circular PCB using a Feather and microphone breakout.pcb-ehd/parts-lib are custom footprints used in the above projects.pcb-sao-magpie design files for the Magpie SAO.NOTE: Both of the pcb-ehd projects have major issues with footprints and layout. DO NOT manufacture these designs. The Magpie SAO can however be manufactured if desired.
The pcb-ehd files require a recent KiCad Nightly build to open, whereas the SAO can be opened in KiCad 5.
In each of the project folders, you will find the below files:
proj.kicad_pro is the overall KiCad project (.pro for V5).proj.kicad_sch is the schematic (.sch for V5).proj.kicad_pcb is the physical layout.outputs/schematic.pdf is a PDF of the schematic.outputs/assembly.html is a "Human Pick and Place" file which will help you hand assemble the board.outputs/bom.csv is the bill of materials required to populate the boards. I have not fully specified the resistors and capacitors for the integrated PCB.| Qty | Value | Footprint | References |
|---|---|---|---|
| 26 | 100n | Capacitor_SMD:C_0603_1608Metric | C2, C10, C12, C13, C14, C15, C16, C17, C18, C22, C23, C24, C25, C26, C27, C28 +10 |
| 21 | WS2812B | ehd:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24, D25 +5 |
| 5 | 1u | Capacitor_SMD:C_0603_1608Metric | C11, C19, C20, C21, C37 |
| 4 | 100K | Resistor_SMD:R_0603_1608Metric | R4, R6, R8, R10 |
| 4 | M2 | MountingHole:MountingHole_2.2mm_M2_DIN965 | H1, H2, H3, H4 |
| 3 | 10K | Resistor_SMD:R_0603_1608Metric | R9, R13, R14 |
| 3 | 10u | Capacitor_SMD:C_0603_1608Metric | C3, C4, C6 |
| 3 | 1K | Resistor_SMD:R_0603_1608Metric | R1, R2, R7 |
| 3 | B3U | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1, SW2, SW3 |
| 2 | 5K1 | Resistor_SMD:R_0603_1608Metric | R3, R5 |
| 2 | 600R | Resistor_SMD:R_0603_1608Metric | FB1, FB2 |
| 1 | 150K | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 2K2 | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 2u2 | Capacitor_SMD:C_0603_1608Metric | C35 |
| 1 | 470n | Capacitor_SMD:C_0603_1608Metric | C34 |
| 1 | 4u7 | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | AR | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP2 |
| 1 | ATSAMD21G18A-M | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm | U2 |
| 1 | DMP2045U | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Edge.Cuts | ehd:bowtie-edge-cuts | LOGO2 |
| 1 | F.Silk | ehd:bowtie-f-silk | LOGO1 |
| 1 | GAIN | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1 |
| 1 | JST_PH | ehd:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J2 |
| 1 | MAX9814 | Package_DFN_QFN:DFN-14-1EP_3x3mm_P0.4mm_EP1.78x2.35mm | U4 |
| 1 | MBR120 | ehd:D_SOD-123FL | D5 |
| 1 | MCP73831T-2 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | Mic | ehd:MIC_CMA-4544PF-W | MK1 |
| 1 | ORG | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | PWR | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | SLIDE | ehd:SW_SPDT_PCM12 | SW4 |
| 1 | SN74LVC1T45DCK | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U6 |
| 1 | SWD | ehd:4_PIN_THT_Staggered | J3 |
| 1 | USB_C_Receptacle_USB2.0 | ehd:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | W25Q32JVZPIQ | Package_SO:SOP-8_5.28x5.23mm_P1.27mm | U5 |

joshajohnson/bsidescbr2021
Slides and Design Files for BSides Canberra 2021



ollielarkins/pmd-tracker
Wearable rugby performance tracker: nRF52840 + Zephyr firmware, React Native companion app
jonaschramm/race-tracker
Custom PCB data logger for motorcycle racing: GPS position + IMU motion data, logged to a microSD card, with an e-Paper status display. Built around an ESP32-S3 (WiFi/BT built in) so it can also stream/sync over WiFi.
/FED3.kicad_pcb.jpg?size=s&soon)


It measures 142.7 × 72 mm and has 2 copper layers, 1.6 mm thick.
101 parts, built around the ATSAMD21G18A-MU, W25Q32JVZPIQ, AP2112K-3.3TRG1 and MCP73831T-2ACI/OT-HXY. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the joshajohnson/bsidescbr2021 repository on GitHub, at the commit this page was made from: the board is pcb-ehd/integrated-pcb/blinky-bowtie.kicad_pcb and its schematic pcb-ehd/integrated-pcb/blinky-bowtie.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).