Skip to the content
2 layers20.5 × 36.5 mmUSB Battery breakout, the printed circuit board in 3D

USB Battery breakout

rblaze/misc-pcbs

Small PCBs for minor projects: IC adapters, evaluation boards, etc

Size
20.5 × 36.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
33
Nets
32
Pads
134
Tracks, vias
228, 20
Pours
3
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
25 Oct 2023
Updated
30 Dec 2025

Overview

USB Battery breakout is an open-source printed circuit board by rblaze, from the rblaze/misc-pcbs repository on GitHub. It is a 2-layer board of 20.5 × 36.5 mm with 33 parts on 32 nets, routed with 228 tracks and 20 vias.

It is built around the TPS7A0533PDBV. Its parts include 11 capacitors, 11 resistors, 4 connectors, 3 diodes and 2 ICs. It belongs with the interfaces and adapters and power boards of this library.

Main components

1

Parts

33
QtyValueFootprintReferences
51uCapacitor_SMD:C_0402_1005MetricC4, C6, C7, C8, C11
410uCapacitor_SMD:C_0603_1608MetricC2, C3, C5, C10
2220Resistor_SMD:R_0402_1005MetricR1, R3
25k1Resistor_SMD:R_0402_1005MetricR5, R6
2Conn_01x06Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ3, J4
1100kResistor_SMD:R_0402_1005MetricR10
110kResistor_SMD:R_0402_1005MetricR4
11uHInductor_SMD:L_Murata_DFE201610PL1
1200kResistor_SMD:R_0402_1005MetricR11
1240Resistor_SMD:R_0402_1005MetricR7
131k23 (31k6)Resistor_SMD:R_0402_1005MetricR9
1470Resistor_SMD:R_0402_1005MetricR2
147nCapacitor_SMD:C_0402_1005MetricC1
14u7Capacitor_SMD:C_0402_1005MetricC9
15k25 (5k23)Resistor_SMD:R_0402_1005MetricR8
1BQ24259RGERProject_Footprints:RGE24_2P7X2P7_TEXU1
1Conn_01x03Connector_JST:JST_PH_S3B-PH-SM4-TB_1x03-1MP_P2.00mm_HorizontalJ2
1GreenLED_SMD:LED_0603_1608MetricD3
1RedLED_SMD:LED_0603_1608MetricD2
1SW_PushButton_Switch_SMD:SW_SPST_PTS810SW1
1TPS7A0533PDBVPackage_TO_SOT_SMD:SOT-23-5U2
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_HorizontalJ1
1YellowLED_SMD:LED_0603_1608MetricD1

More from rblaze/misc-pcbs

7
  • 2 layers15.6 × 23.8 mmTE joystick breakout, the printed circuit board in 3D

    TE joystick breakout

    rblaze/misc-pcbs

    Small PCBs for minor projects: IC adapters, evaluation boards, etc

    18 parts
  • 2 layers77 × 39 mmNH LCD I2C breakout, the printed circuit board in 3D

    NH LCD I2C breakout

    rblaze/misc-pcbs

    Small PCBs for minor projects: IC adapters, evaluation boards, etc

    13 parts
  • 2 layers16.7 × 24 mmBQ24259 adapter, the printed circuit board in 3D

    BQ24259 adapter

    rblaze/misc-pcbs

    Small PCBs for minor projects: IC adapters, evaluation boards, etc

    12 parts
  • 2 layers19 × 57 mmStm32 lqfp48 breakout, the printed circuit board in 3D

    Stm32 lqfp48 breakout

    rblaze/misc-pcbs

    Small PCBs for minor projects: IC adapters, evaluation boards, etc

    11 parts
  • 2 layers18.5 × 62 mmStm32g0x1 lqfp48 breakout, the printed circuit board in 3D

    Stm32g0x1 lqfp48 breakout

    rblaze/misc-pcbs

    Small PCBs for minor projects: IC adapters, evaluation boards, etc

    10 parts
  • 2 layers15.5 × 42 mmStm32g0x1 ufqfpn32 breakout, the printed circuit board in 3D

    Stm32g0x1 ufqfpn32 breakout

    rblaze/misc-pcbs

    Small PCBs for minor projects: IC adapters, evaluation boards, etc

    8 parts
  • 2 layers11.5 × 14.5 mmPHR3 breakout, the printed circuit board in 3D

    PHR3 breakout

    rblaze/misc-pcbs

    Small PCBs for minor projects: IC adapters, evaluation boards, etc

    2 parts

Similar boards

  • 4 layers99.8 × 119.8 mmLC RFE RevA2, the printed circuit board in 3D

    LC RFE RevA2

    myriadrf/lc-rfe

    LibreCellular RF Front-End Hardware Design

    262 parts7
  • 4 layers60 × 22 mmStm32g431 devboard, the printed circuit board in 3D

    Stm32g431 devboard

    guillegil/STM32G431-Development-Board

    KiCad design files for an STM32G431 development board

    42 parts2MIT
  • 4 layers45.5 × 19.6 mmStm32 bluet pill, the printed circuit board in 3D

    Stm32 bluet pill

    brendose/stm32_bluet_pill

    This project is a 1.8V STM32WB55 Bluetooth Module with battery charging. The purpose of this project is to provide a development platform for mobile wearable devices.

    93 parts1
  • 4 layers71.1 × 50.8 mmStm32 audio class device, the printed circuit board in 3D

    Stm32 audio class device

    IsaacHo072/STM32-USB-Microphone-Interface

    USB Audio Class Device with STM32G431CB and TLV320ADC6120

    64 parts1
  • 4 layers92.8 × 76 mmDeck-8, the printed circuit board in 3D

    Deck-8

    varaddorle007/deck-8

    Open-source 8-key macro pad with 2 knobs, OLED and Bluetooth: PCB, case and ZMK firmware

    101 parts1MIT
  • 4 layers49.3 × 53.8 mmNovara main, the printed circuit board in 3D

    Novara main

    abhisheknote1234-writ/Novara_PCB_Design

    The HARDWARE design for the product - Intelligent maternal health monitoring using PPG for early detection of stress and pregnancy-related risks.

    52 parts
  • 4 layers38 × 36.2 mmPen mixer, the printed circuit board in 3D

    Pen mixer

    Brillar0101/pen-mixer

    Pen-mounted motion controller: prototype and production firmware, laptop audio stack, and the production PCB as a KiCad project

    32 partsMIT

Questions

How big is the USB Battery breakout PCB?

It measures 20.5 × 36.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the USB Battery breakout use?

33 parts, built around the TPS7A0533PDBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the USB Battery breakout KiCad files?

From the rblaze/misc-pcbs repository on GitHub, at the commit this page was made from: the board is USB_Battery_breakout/USB_Battery_breakout.kicad_pcb and its schematic BQ24259_adapter/BQ24259_adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the USB Battery breakout design in my own project?

Its repository states no licence, so its author keeps all rights: ask rblaze before reusing the design.