Skip to the content
12345

TPS7A0533PDBV

Texas InstrumentsExtended

-40℃~+125℃@(Tj) 1 180uVrms 1uA 200mA 235mV@(200mA) 3.3V 40dB@(1MHz) 5.5V Fixed Over Current Protection、Over Temperature Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
ti/TPS7A0533PDBV
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOT-23-5
Pins
5
In stock
791 at JLCPCB (C493453)
Used on
30 open-source boards

Overview

The TPS7A0533PDBV is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a SOT-23-5 package with 5 pins. -40℃~+125℃@(Tj) 1 180uVrms 1uA 200mA 235mV@(200mA) 3.3V 40dB@(1MHz) 5.5V Fixed Over Current Protection、Over Temperature Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:TPS7A0533PDBV, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 791 are in stock at JLCPCB (part C493453). 30 open-source boards in 22 repositories on GitHub use it.

Symbol

1IN2GND3EN5OUT
Regulator_Linear:TPS7A0533PDBVFrom KiCad's library

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

From the datasheet

13
Supply, least
1.4 V · VIN, recommended operating minimum · p. 6
Supply, most
5.5 V · VIN, recommended operating maximum · p. 6
Supply, absolute maximum
6 V · IN, absolute maximum · p. 6
Junction, hottest
125 °C · TJ, maximum operating junction temperature · p. 6
Takes working
1 µA · IGND, typical at TJ = 25°C, IOUT = 1 uA · p. 7
Takes asleep
100 nA · ISHDN, typical at VEN = 0.4 V, TJ = 25°C · p. 7
Gives
200 mA · IOUT, maximum recommended output current · p. 6
Current limit
450 mA · ICL, typical at VOUT = 90% × VOUT(nom) · p. 7
Dropout
212 mV · maximum at IOUT = 200 mA, VOUT = 3.3 V, TJ = –40°C to +85°C · p. 8
Dropout
235 mV · maximum at IOUT = 200 mA, VOUT = 3.3 V, TJ = –40°C to +125°C · p. 8
Junction to air (DBV)
185.6 K/W · junction-to-ambient thermal resistance · p. 6
Junction to case (DBV)
104.3 K/W · junction-to-case top thermal resistance · p. 6
Junction to board (DBV)
54.5 K/W · junction-to-board thermal resistance · p. 6

What it is and has

3
Output discharge
Active output discharge · p. 1
Protection
Foldback current limit · p. 1
Package option
SOT-23 (5) · p. 1

Around it

3
cap 1 µF
between IN and GND; Nominal recommended input capacitor; use ceramic and place close to IN. · p. 6
cap 1 µF
between OUT and GND; Nominal recommended output capacitor; allowed range 0.47 to 22 uF. Use ceramic and place close to OUT. · p. 6
cap 1 µF or greater
between IN and GND; Recommended to reduce input supply impedance, especially during transients; low-ESR ceramic recommended. · p. 27

Specifications

47
ParameterConditionsAs printedPage
VoltageIN; all voltages with respect to GNDmin -0.3 · max 6 V6
VoltageEN; maximum VIN + 0.3 V; all voltages with respect to GNDmin -0.3 V6
VoltageOUT; maximum VIN + 0.3 V or 3.6 V, whichever is smallermin -0.3 V6
Operating junction temperature TJmin -40 · max 125 °C6
Storage temperature Tstgmin -65 · max 150 °C6
Electrostatic discharge V(ESD)Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001; value ±1000 Vmin -1000 · max 1000 V6
Electrostatic discharge V(ESD)Charged-device model (CDM), per JEDEC specification JESD22-C101; value ±500 Vmin -500 · max 500 V6
Input supply voltage VINmin 1.4 · max 5.5 V6
Enable supply voltage VENMaximum VINmin 0 V6
Nominal output voltage range VOUTFamily output voltage rangemin 0.8 · max 3.3 V6
Output current IOUTOutput current of 10 uA minimum required to meet output voltage accuracy specificationmin 0 · max 200 mA6
Input capacitor CINNominal valuetyp 1 uF6
Output capacitor COUTTypical field represents NOM columnmin 0.47 · typ 1 · max 22 uF6
Operating junction temperature TJmin -40 · max 125 °C6
Junction-to-ambient thermal resistance RθJADBV (SOT-23), 5 PINStyp 185.6 °C/W6
Junction-to-case (top) thermal resistance RθJC(top)DBV (SOT-23), 5 PINStyp 104.3 °C/W6
Junction-to-board thermal resistance RθJBDBV (SOT-23), 5 PINStyp 54.5 °C/W6
Junction-to-top characterization parameter ΨJTDBV (SOT-23), 5 PINStyp 31 °C/W6
Junction-to-board characterization parameter YJBDBV (SOT-23), 5 PINStyp 54.5 °C/W6
Nominal accuracyVOUT ≥ 1.0 V, TJ = 25°Cmin -1 · max 1 %7
Accuracy over temperatureVOUT ≥ 1.0 V, TJ = –40°C to +85°Cmin -2 · max 2 %7
Accuracy over temperatureVOUT ≥ 1.0 V, TJ = –40°C to +125°Cmin -3 · max 3 %7
Line regulation ΔVOUT(ΔVIN)VOUT(nom) + 0.5 V ≤ VIN ≤ 5.5 V, TJ = –40°C to +85°Ctyp 5 · max 16.5 mV7
Line regulation ΔVOUT(ΔVIN)VOUT(nom) + 0.5 V ≤ VIN ≤ 5.5 V, TJ = –40°C to +125°Cmax 18 mV7
Load regulation ΔVOUT(ΔIOUT)DBV; 100 uA ≤ IOUT ≤ 200 mA, VIN = VOUT(nom) + VDO(max) + 0.1 V, TJ = –40°C to +85°Ctyp 20 · max 43 mV7
Load regulation ΔVOUT(ΔIOUT)DBV; 100 uA ≤ IOUT ≤ 200 mA, VIN = VOUT(nom) + VDO(max) + 0.1 V, TJ = –40°C to +125°Cmax 55 mV7
Ground current IGNDTJ = 25°C, IOUT = 1 uAmin 0.6 · typ 1 · max 1.3 uA7
Ground current IGNDIOUT = 1 uA, TJ = –40°C to +85°Cmax 2 uA7
Ground current IGNDIOUT = 1 uA, TJ = –40°C to +125°Cmax 3 uA7
Shutdown current ISHDNVEN = 0.4 V, 1.4 V ≤ VIN ≤ 5.5 V, TJ = 25°Ctyp 100 · max 300 nA7
Output current limit ICLVOUT = 90% × VOUT(nom), VIN = VOUT(nom) + VDO(max) + 0.5 Vmin 210 · typ 450 · max 700 mA7
Output current limit ICLVOUT = 90% × VOUT(nom), VIN = VOUT(nom) + VDO(max) + 0.5 V, TJ = 0°C to +85°Cmin 250 · typ 450 · max 700 mA7
Short-circuit current limit ISCVOUT = 0 Vtyp 65 · max 150 mA7
Dropout voltage VDODBV; IOUT = 200 mA, TJ = –40°C to +85°C, VOUT = 3.3 Vmax 212 mV8
Dropout voltage VDODBV; IOUT = 200 mA, TJ = –40°C to +125°C, VOUT = 3.3 Vmax 235 mV8
Power-supply rejection ratio PSRRf = 1 kHz, IOUT = 30 mAtyp 40 dB8
Power-supply rejection ratio PSRRf = 500 kHz, IOUT = 30 mAtyp 30 dB8
Power-supply rejection ratio PSRRf = 1 MHz, IOUT = 30 mAtyp 40 dB8
UVLO threshold VUVLOVIN risingmin 1.21 · typ 1.3 · max 1.37 V8
UVLO hysteresis VUVLO(HYST)VIN fallingtyp 40 mV8
UVLO threshold VUVLOVIN fallingmin 1.17 · max 1.33 V8
EN pin logic high voltage VEN(HI)min 0.9 V8
EN pin logic low voltage VEN(LO)max 0.4 V8
EN pin current IENVEN = VIN = 5.5 Vtyp 10 nA8
Pulldown resistor RPULLDOWNVIN = 3.3 V, P version onlytyp 120 Ω8
Thermal shutdown temperature TsdShutdown, temperature increasingtyp 160 °C8
Thermal shutdown temperature TsdReset, temperature decreasingtyp 140 °C8

Pins, by the datasheet

5
1 IN
Input supply; connect the recommended ceramic capacitor from IN to ground, close to the device. · p. 5
2 GND
Connect to ground on the board. · p. 5
3 EN
High enables and low disables the device; connect to IN if unused. VEN must not exceed VIN. · p. 5
4 NC
Not internally connected; connect to ground or leave floating. · p. 5
5 OUT
Regulated output; a capacitor to ground is required for stability and should be placed close to the output. · p. 5

Ordering codes, by the datasheet

2
TPS7A0533PDBVR
SOT-23, DBV, 5 pins · Package quantity 3000 · p. 34
TPS7A0533PDBVT
SOT-23, DBV, 5 pins · Package quantity 250 · p. 34

Open-source boards using it

30See all 30
  • 4 layers99.8 × 119.8 mmLC RFE RevA2, the printed circuit board in 3D

    LC RFE RevA2

    myriadrf/lc-rfe

    LibreCellular RF Front-End Hardware Design

    262 parts7
  • 4 layers60 × 22 mmStm32g431 devboard, the printed circuit board in 3D

    Stm32g431 devboard

    guillegil/STM32G431-Development-Board

    KiCad design files for an STM32G431 development board

    42 parts2MIT
  • 4 layers45.5 × 19.6 mmStm32 bluet pill, the printed circuit board in 3D

    Stm32 bluet pill

    brendose/stm32_bluet_pill

    This project is a 1.8V STM32WB55 Bluetooth Module with battery charging. The purpose of this project is to provide a development platform for mobile wearable devices.

    93 parts1
  • 4 layers71.1 × 50.8 mmStm32 audio class device, the printed circuit board in 3D

    Stm32 audio class device

    IsaacHo072/STM32-USB-Microphone-Interface

    USB Audio Class Device with STM32G431CB and TLV320ADC6120

    64 parts1
  • 4 layers92.8 × 76 mmDeck-8, the printed circuit board in 3D

    Deck-8

    varaddorle007/deck-8

    Open-source 8-key macro pad with 2 knobs, OLED and Bluetooth: PCB, case and ZMK firmware

    101 parts1MIT
  • 4 layers49.3 × 53.8 mmNovara main, the printed circuit board in 3D

    Novara main

    abhisheknote1234-writ/Novara_PCB_Design

    The HARDWARE design for the product - Intelligent maternal health monitoring using PPG for early detection of stress and pregnancy-related risks.

    52 parts
  • 4 layers38 × 36.2 mmPen mixer, the printed circuit board in 3D

    Pen mixer

    Brillar0101/pen-mixer

    Pen-mounted motion controller: prototype and production firmware, laptop audio stack, and the production PCB as a KiCad project

    32 partsMIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TPS7A0533PDBV?

Yes. The symbol is Regulator_Linear:TPS7A0533PDBV and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS7A0533PDBV?

SOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the TPS7A0533PDBV datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS7A0533PDBV?

JLCPCB lists it as part C493453, with 791 in stock; the sellers' links on this page open their listings.

What can replace the TPS7A0533PDBV?

Parts like it in the library: the ME6211C33M5G-N by MICRONE, the SPX3819M5-L-3-3/TR by MaxLinear, the RT9013-33GB by RICHTEK and the XC6219B332MR by UMW. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS7A0533PDBV?

30 boards in 22 repositories on GitHub; the most starred are listed on this page, with their KiCad files.