

Ethernet Dev Board
Small dev board for the ESP32 that is meant to incorporate ethernet controller for testing
- Size
- 79.9 × 65.2 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 116
- Nets
- 144
- Pads
- 463
- Tracks, vias
- 1,372, 208
- Pours
- 21
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 13 Mar 2024
- Updated
- 11 Sep 2024
Overview
Ethernet Dev Board is an open-source printed circuit board by ResonanceGroup, from the ResonanceGroup/ESP32_Ethernet_Dev_Board repository on GitHub, published under the MIT licence. It is a 4-layer board of 79.9 × 65.2 mm with 116 parts on 144 nets, routed with 1,372 tracks and 208 vias.
It is built around the ESP32-WROOM-32E, 74AUP1T08GWH and 74LVC1G11W6, with the AZ1117CD, 1N4148X-TP and MH2029-300Y among its other parts. Its parts include 50 capacitors, 33 resistors, 7 ICs, 7 diodes and 5 connectors. It belongs with the interfaces and adapters and microcontroller boards boards and the ESP32 boards of this library.
Main components
7ESP32-WROOM-32E
SMD,18x25.5mmSMD,18x25.5mm WiFi Modules ROHSEspressif SystemsWiFi Modules74AUP1T08GWH
TSSOP-5-1.3mm-40℃~+125℃ 1 1.2uA 2 2.3V~3.6V 2.3V、2.4V、2.55V、2.6V、2.67V、2.72V 310mV、330mV、360mV、440mV、450mV、500mV 4mA 4mA 74AUP Series 7ns@3.3V,30pF AND Gate TSSOP-5-1.3mm Logic Gates ROHSNexperiaLogic Gates74LVC1G11W6
SOT-26-40℃~+125℃ 1 1.65V~5.5V 1.7V~2V 3 3.5ns@5V,50pF 32mA 32mA 40uA 74LVC Series AND Gate Overvoltage-tolerant input、Local shutdown mode Push-pull SOT-26 Logic Gates ROHSDiodes IncorporatedLogic GatesAZ1117CD
800mA LDO Voltage RegulatorDiodes IncorporatedUncategorised1N4148X-TP
SOD-523-65℃~+150℃ 1 Independent 1.25V@150mA 150mA 1uA@75V 200mW 2A 4ns 75V SOD-523 Switching Diodes ROHSMicro Commercial ComponentsSwitching DiodesMH2029-300Y
0805-55℃~+125℃ 1 30Ω@100MHz 3A 3mΩ ±25% 0805 Ferrite Beads ROHSBournsFerrite BeadsPMV48XPA2R
SOT-23-55℃~+175℃ 1 P-Channel 10nC@4.5V 20V 49mΩ@8V 4A 600mV 610mW、8.3W 679pF 75pF SOT-23 MOSFETs ROHSNexperiaMOSFETs
README
README.mdThis project is meant to test 2 different ethernet controller chips for the ESP32. The board is testing the W5100S and W5500. Only populate one or the other. Feel free to use this schematic as a reference. Or make your dev board that includes the ethernet controllers. If referencing off of the schematic, please provide credit to the original project (this one).
Will update later which circuit performed the best.
Parts
116| Qty | Value | Footprint | References |
|---|---|---|---|
| 28 | 0.1uF | RG_Capacitors_SMD:0603 | C109, C113, C114, C115, C116, C117, C118, C119, C121, C123, C124, C125, C127, C204, C205, C301 +12 |
| 8 | 10k | RG_Resistors_SMD:0603 | R102, R201, R210, R301, R402, R403, R404, R407 |
| 8 | 49.9 | RG_Resistors_SMD:0603 | R206, R207, R208, R209, R303, R304, R305, R306 |
| 6 | 22uF | RG_Capacitors_SMD:0603 | C106, C107, C108, C111, C112, C403 |
| 4 | 18pF | RG_Capacitors_SMD:0603 | C209, C210, C303, C304 |
| 4 | 3.3 | RG_Resistors_SMD:0603 | R307, R308, R309, R310 |
| 4 | 470 | RG_Resistors_SMD:0603 | R203, R312, R405, R406 |
| 3 | 2.2uF | RG_Capacitors_SMD:0603 | C126, C203, C402 |
| 3 | ~ | RG_Resistors_SMD:0603 | FB103, FB301, FB302 |
| 2 | 10k | RG_Resistors_SMD:RESCAXS10P64_1206 | R202, R205 |
| 2 | 1M | RG_Resistors_SMD:0603 | R212, R302 |
| 2 | 1N4148X | RG_Diode:SOD-523-D | D101, D401 |
| 2 | 1nF | RG_Capacitors_SMD:1206 | C208, C306 |
| 2 | 1uF | RG_Capacitors_SMD:0603 | C128, C305 |
| 2 | 25MHz | RG_Crystal:YANGXING_SMD_3225_4L | XTAL201, XTAL301 |
| 2 | 6.8nF | RG_Capacitors_SMD:0603 | C206, C207 |
| 2 | MH2029-300Y | RG_Resistors_SMD:0805 | FB101, FB102 |
| 2 | ~ | RG_Connectors:WIZNET_RB1-125BAG1A | J201, J301 |
| 1 | 1.2V | RG_TO_SOT_SMD:SOT23-5P65 | U103 |
| 1 | 10 | RG_Resistors_SMD:0603 | R211 |
| 1 | 10nF | RG_Capacitors_SMD:0603 | C202 |
| 1 | 10uF | RG_Capacitors_SMD:0603 | C101 |
| 1 | 12.3k | RG_Resistors_SMD:0603 | R311 |
| 1 | 12.4k | RG_Resistors_SMD:0603 | R204 |
| 1 | 2.2k | RG_Resistors_SMD:0603 | R101 |
| 1 | 25MHz | RG_Crystal:Crystal_SMD_4Pin_3.2x2.5mm | Y301 |
| 1 | 25MHz | RG_Crystal:Crystal_SMD_4Pin_7.0mmx5.0mm | Y201 |
| 1 | 3.3V | RG_Diode:SMB-D | TVS101 |
| 1 | 4.7uF | RG_Capacitors_SMD:0603 | C201 |
| 1 | 470k | RG_Resistors_SMD:0603 | R401 |
| 1 | 5100 ACT | RG_Diode:0805-D | LED301 |
| 1 | 5500 ACT | RG_Diode:0805-D | LED201 |
| 1 | 74AUP1T08GWH | RG_TO_SOT_SMD:SOT23-5P65 | U102 |
| 1 | 74LVC1G11W6 | RG_TO_SOT_SMD:SOT23-6 | U403 |
| 1 | AZ1117 | RG_TO_SOT_SMD:TO252-3_(D-PAK) | U101 |
| 1 | ESP32-WROOM-32E | RG_Modules:ESP32-WROOM_PCBANT | U402 |
| 1 | ETH | RG_Diode:0805-D | LED401 |
| 1 | LOGO | RG_Logo:Logo_1 | G*** |
| 1 | MQTT | RG_Diode:0805-D | LED402 |
| 1 | PMV48XPA2R | RG_TO_SOT_SMD:SOT23-3P95 | Q201 |
| 1 | PROGRAM | RG_Switches:SW_TS04-66-65-BK-260-SMT | S402 |
| 1 | Power | RG_Diode:0805-D | LED101 |
| 1 | Power In | RG_Terminals:CUI_TBP01R1-508-02BE | J101 |
| 1 | RESET | RG_Switches:SW_TS04-66-65-BK-260-SMT | S401 |
| 1 | TAG-CONNECT_NL_10-POS_LEGS | RG_Programmers:TC2050-IDC | J401 |
| 1 | WIZNET_W5500 | RG_QFP:QFP48P50 | U201 |
| 1 | ~ | RG_QFP:QFP48P50 | U301 |
| 1 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x14_P2.54mm_Vertical | J402 |
Similar boards
- 2 layers28 × 28 mm

- 4 layers52 × 94.2 mm

Tangara mainboard
dpaola2/Harmony
Current logistics, September 26: core modules are received, and the revision B shells, LCD supports and carrier gauge passed loose fit checks. Screws and foam are ordered. The SD trial playlist is prepared.
124 parts - 4 layers90 × 47 mm

- 4 layers180.4 × 157.2 mm

- 4 layers95.4 × 36.2 mm

- 6 layers95.4 × 36.1 mm

- 4 layers114.8 × 72 mm

Tanmantsu zero
badgeteam/konsool-zero
RFID NFC <1GHz radio Konsool expansion board
182 partsBSD-3-Clause - 2 layers80 × 100 mm

Questions
How big is the Ethernet Dev Board PCB?
It measures 79.9 × 65.2 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Ethernet Dev Board use?
116 parts, built around the ESP32-WROOM-32E, 74AUP1T08GWH, 74LVC1G11W6 and AZ1117CD. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ethernet Dev Board KiCad files?
From the ResonanceGroup/ESP32_Ethernet_Dev_Board repository on GitHub, at the commit this page was made from: the board is Ethernet_Dev_Board/Ethernet_Dev_Board.kicad_pcb and its schematic Ethernet_Dev_Board/ESP32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ethernet Dev Board design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).