

ClipperOne
- Size
- 95.4 × 36.1 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 238
- Nets
- 186
- Pads
- 923
- Tracks, vias
- 1,321, 475
- Pours
- 15
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 18 Sep 2024
- Updated
- 21 Feb 2025
Overview
ClipperOne is an open-source printed circuit board by KarkeNeko, from the KarkeNeko/ClipperOne repository on GitHub. It is a 6-layer board of 95.4 × 36.1 mm with 238 parts on 186 nets, routed with 1,321 tracks and 475 vias.
It is built around the BGS13S4N9E6327XTSA1, CC1101RGP and DLF162500LT-5028A1, with the SKRMAAE010, 1N4148X-TP and B0310J50100AHF among its other parts. Its parts include 78 capacitors, 56 resistors, 34 diodes, 18 inductors and 6 switches.
Main components
7BGS13S4N9E6327XTSA1
TSNP-9-3TSNP-9-3 RF Switches ROHSInfineon TechnologiesRF SwitchesCC1101RGP
QFN-20-EP(4x4)-116dBm -40℃~+85℃ 1.8V~3.6V 12.3mA 12dBm 14.3mA 600Kbps ISM SPI QFN-20-EP(4x4) RF Transceiver ICs ROHSTexas InstrumentsRF Transceiver ICsDLF162500LT-5028A1
SMD-4P,1.6x0.8mm-40℃~+85℃ 0.33dB 2.4GHz~2.5GHz 49.2dB 50Ω Low Pass SMD-4P,1.6x0.8mm RF Filters ROHSTDKRF FiltersSKRMAAE010
SMD-4P,4.5x4.5mm-40℃~+85℃ 0.4mm 1.6N 12V 4.5mm 4.5mm 500,000 Cycles 50mA J-Lead Round Button SPST-NO Surface Mount,Vertical SMD-4P,4.5x4.5mm Tactile Switches ROHSALPSALPINETactile Switches1N4148X-TP
SOD-523-65℃~+150℃ 1 Independent 1.25V@150mA 150mA 1uA@75V 200mW 2A 4ns 75V SOD-523 Switching Diodes ROHSMicro Commercial ComponentsSwitching DiodesB0310J50100AHF
0805-55℃~+105℃ 1dB 2.8dB 300MHz~1GHz 38° 50Ω:100Ω 8.1dB 9dB 0805 Balun ROHSAnarenBalunDMN313DLT
SOT-523-55℃~+150℃ 1 N-channel 1.5V 3.2Ω@2.5V 30V 310mA 36.3pF 360mW 4.7pF 500pC@4.5V 7.6pF SOT-523 MOSFETs ROHSDiodes IncorporatedMOSFETs
Parts
238| Qty | Value | Footprint | References |
|---|---|---|---|
| 30 | TVS | Diode_SMD:D_0201_0603Metric | D1, D2, D11, D12, D13, D14, D15, D16, D18, D19, D20, D21, D22, D23, D24, D25 +14 |
| 17 | 100nF | Capacitor_SMD:C_0402_1005Metric | C2, C3, C4, C5, C8, C13, C40, C41, C42, C43, C44, C45, C46, C66, C69, C80 +1 |
| 14 | 10K | Resistor_SMD:R_0402_1005Metric | R2, R3, R8, R11, R12, R14, R19, R20, R21, R22, R23, R30, R31, R54 |
| 11 | TBD | Capacitor_SMD:C_0402_1005Metric | C58, C62, C63, C71, C72, C74, C75, C76, C77, C78, C83 |
| 7 | 330R | Resistor_SMD:R_0402_1005Metric | R24, R25, R26, R27, R28, R29, R33 |
| 7 | 47K | Resistor_SMD:R_0402_1005Metric | R37, R38, R39, R40, R41, R42, R43 |
| 6 | 10uF | Capacitor_SMD:C_0402_1005Metric | C20, C21, C26, C27, C67, C68 |
| 6 | 1uF | Capacitor_SMD:C_0402_1005Metric | C9, C12, C18, C24, C32, C33 |
| 6 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C1, C7, C11, C28, C29, C38 |
| 6 | SKRMAAE010 | Library:SW_Push_SPST_NO_Alps_ SKRM | SW1, SW2, SW3, SW4, SW5, SW6 |
| 5 | 0R | Inductor_SMD:L_0201_0603Metric | L10, L11, L13, L15, L19 |
| 5 | 51R | Resistor_SMD:R_0402_1005Metric | R1, R45, R46, R47, R50 |
| 4 | 10nF | Capacitor_SMD:C_0402_1005Metric | C10, C39, C54, C55 |
| 4 | 1N4148X-TP | Diode_SMD:D_SOD-523 | D7, D8, D9, D17 |
| 4 | 5.1K | Resistor_SMD:R_0402_1005Metric | R6, R7, R51, R52 |
| 4 | 51R | Resistor_SMD:R_Array_Concave_4x0402 | RN1, RN2, RN3, RN4 |
| 4 | TBD | Capacitor_SMD:C_0201_0603Metric | C50, C56, C57, C65 |
| 3 | 0R | Resistor_SMD:R_0402_1005Metric | R18, R35, R36 |
| 3 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C23, C73, C79 |
| 3 | 2.7nH | Inductor_SMD:L_0201_0603Metric | L3, L20, L21 |
| 2 | 100K | Resistor_SMD:R_0402_1005Metric | R32, R34 |
| 2 | 100pF | Capacitor_SMD:C_0402_1005Metric | C6, C70 |
| 2 | 100pF | Capacitor_SMD:C_0201_0603Metric | C47, C49 |
| 2 | 10pF | Capacitor_SMD:C_0201_0603Metric | C59, C60 |
| 2 | 12pF | Capacitor_SMD:C_0402_1005Metric | C52, C53 |
| 2 | 150R | Resistor_SMD:R_0402_1005Metric | R44, R48 |
| 2 | 18pF | Capacitor_SMD:C_0402_1005Metric | C16, C17 |
| 2 | 1uH | Inductor_SMD:L_Murata_DFE201610P | L4, L5 |
| 2 | BGS13S4N9E6327XTSA1 | Library:BGA-9_3x3_1.2x1.2mm | U9, U10 |
| 1 | 0.3pF | Capacitor_SMD:C_0201_0603Metric | C14 |
| 1 | 0.6pF | Capacitor_SMD:C_0201_0603Metric | C48 |
| 1 | 0.8pF | Capacitor_SMD:C_0201_0603Metric | C15 |
| 1 | 0R | Resistor_SMD:R_0201_0603Metric | R16 |
| 1 | 1.2pF | Capacitor_SMD:C_0201_0603Metric | C51 |
| 1 | 100R | Resistor_SMD:R_0402_1005Metric | R13 |
| 1 | 10K | Resistor_SMD:R_0201_0603Metric | R15 |
| 1 | 10m | Resistor_SMD:R_2512_6332Metric | R5 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C25 |
| 1 | 10uH | Inductor_SMD:L_0805_2012Metric | L2 |
| 1 | 10uH | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 1K | Resistor_SMD:R_0402_1005Metric | R49 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C35 |
| 1 | 2.2nH | Inductor_SMD:L_0402_1005Metric | L17 |
| 1 | 225K | Resistor_SMD:R_0402_1005Metric | R55 |
| 1 | 22nH | Inductor_SMD:L_0201_0603Metric | L16 |
| 1 | 22pF | Capacitor_SMD:C_0201_0603Metric | C61 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C30 |
| 1 | 26MHz | Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm | Y3 |
| 1 | 27nH | Inductor_SMD:L_0201_0603Metric | L14 |
| 1 | 2A | Fuse:Fuse_0402_1005Metric | F1 |
| 1 | 3.3nH | Inductor_SMD:L_0201_0603Metric | L8 |
| 1 | 30.1K | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 30.9K | Resistor_SMD:R_0402_1005Metric | R53 |
| 1 | 32.768K | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 1 | 32MHz | Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm | Y1 |
| 1 | 3V3_EXT | TestPoint:TestPoint_Pad_D1.0mm | TP21 |
| 1 | 3V3_MAIN | TestPoint:TestPoint_Pad_D1.0mm | TP20 |
| 1 | 470R | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 470nF | Capacitor_SMD:C_0402_1005Metric | C22 |
| 1 | 47nF | Capacitor_SMD:C_0402_1005Metric | C19 |
| 1 | 5.23K | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 50K | Resistor_SMD:R_0402_1005Metric | R56 |
| 1 | 56K/0.1% | Resistor_SMD:R_0402_1005Metric | R17 |
| 1 | 56nH | Inductor_SMD:L_0201_0603Metric | L12 |
| 1 | 5V_USB | TestPoint:TestPoint_Pad_D1.0mm | TP12 |
| 1 | 6.8nH | Inductor_SMD:L_0201_0603Metric | L9 |
| 1 | 8.2pF | Capacitor_SMD:C_0201_0603Metric | C64 |
| 1 | B0310J50100AHF | Library:B0310J50100AHF | T1 |
| 1 | BACK_LIGHT | Library:ERC12864FAMF03 | J3 |
| 1 | BATT | Connector_Molex:Molex_PicoBlade_53261-0371_1x03-1MP_P1.25mm_Horizontal | J1 |
| 1 | BQ25896RTWR | Package_DFN_QFN:Texas_RTW_WQFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm | U3 |
| 1 | BQ27220YZFR | Package_BGA:Texas_DSBGA-9_1.62mmx1.58mm_Layout3x3_P0.5mm | U2 |
| 1 | Balun | Library:TP_DP | TP32 |
| 1 | CC1101RGP | Package_DFN_QFN:Texas_RGP0020H_VQFN-20-1EP_4x4mm_P0.5mm_EP2.4x2.4mm | U8 |
| 1 | CC1101_OUT | Library:TP_DP | TP33 |
| 1 | CharlieYu | Logos:charlieyu | RFF** |
| 1 | CrossAir CA-C03 | Library:CrossAir-C3 | AE1 |
| 1 | DLF162500LT-5028A1 | Library:DLF162500LT | FL1 |
| 1 | DMN313DLT | Package_TO_SOT_SMD:SOT-523 | Q1 |
| 1 | EXT0 | Library:PinSocket_1x08_P2.54mm_Horizontal_SMD | J7 |
The 218 most common of 238 parts.
More from KarkeNeko/ClipperOne
2- 4 layers74.1 × 32 mm

- 2 layers15.8 × 24.3 mm

Similar boards
- 4 layers95.4 × 36.2 mm

- 4 layers114.8 × 72 mm

Tanmantsu zero
badgeteam/konsool-zero
RFID NFC <1GHz radio Konsool expansion board
182 partsBSD-3-Clause - 2 layers28 × 18 mm

- 8 layers40 × 94 mm

FD MAIN-01
Fairank/FieldDock
Compact iPhone companion hardware: editable PCB, mechanical CAD and portable firmware. Engineering prototype; original work available for noncommercial use.
424 parts - 4 layers180.4 × 157.2 mm

- 4 layers90 × 36 mm

A3-before crystal refinement
bdini13/esp32-cc1101-multiband
Work-in-progress ESP32-WROOM-32E + CC1101 multiband PCB: software-selected 315/433/868/915 MHz paths. AI-assisted engineering draft; not manufacturing-ready.
121 parts1 - 4 layers80 × 160 mm

PCB V3.1
Jonathan-0101/skeletonKey
BEng Dissertation; Penetration-testing device to highlight security system vulnerabilities
299 parts1GPL-3.0 - 2 layers80 × 100 mm

Questions
How big is the ClipperOne PCB?
It measures 95.4 × 36.1 mm and has 6 copper layers, 1.6 mm thick.
What parts does the ClipperOne use?
238 parts, built around the BGS13S4N9E6327XTSA1, CC1101RGP, DLF162500LT-5028A1 and SKRMAAE010. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ClipperOne KiCad files?
From the KarkeNeko/ClipperOne repository on GitHub, at the commit this page was made from: the board is Hardware/main_board/main_board.kicad_pcb and its schematic Hardware/iButton/iButton.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ClipperOne design in my own project?
Its repository states no licence, so its author keeps all rights: ask KarkeNeko before reusing the design.