
LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

LED board for the CH32 breakout
Ch32-breakout led board is an open-source printed circuit board by ReFil, from the ReFil/ch32-breakout-led-board repository on GitHub. It is a 2-layer board of 23.3 × 20 mm with 21 parts on 17 nets, routed with 111 tracks and 11 vias.
Its parts include 11 ICs, 6 transistors, 2 connectors and 1 switch. It belongs with the interfaces and adapters boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | ~ | ch32-breakout-led-board:CastPadsmall | U1, U2, U3, U4, U5, U6, U7, U8 |
| 6 | Q_NMOS_Depletion_GSD | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 3 | ~ | ch32-breakout-led-board:CastPadBig | U9, U10, U11 |
| 1 | Conn_01x02_Socket | ch32-breakout-led-board:magnetconn | J1 |
| 1 | Conn_01x12 | Connector_PinSocket_1.00mm:PinSocket_1x12_P1.00mm_Vertical_SMD_Pin1Left | J2 |
| 1 | SW_Push | ch32-breakout-led-board:TACTILE_SWITCH_SMD_4.6X2.8MM | SW1 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_1.5x1.5mm | TP2 |

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad

Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.


It measures 23.3 × 20 mm and has 2 copper layers, 0.8 mm thick.
21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ReFil/ch32-breakout-led-board repository on GitHub, at the commit this page was made from: the board is ch32-breakout-led-board.kicad_pcb and its schematic ch32-breakout-led-board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ReFil before reusing the design.