
USB TO 8 UART
LuizFernandoOliveira/Conversor-USB-para-8-UARTs
This work is licensed under a [Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International License][cc-by-nc-nd].

LuizFernandoOliveira/Conversor-USB-para-8-UARTs
This work is licensed under a [Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International License][cc-by-nc-nd].

LuizFernandoOliveira/Conversor-USB-para-BLE
This work is licensed under a [Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International License][cc-by-nc-nd].

LuizFernandoOliveira/Conversor-USB-para-RS232-e-RS485
This work is licensed under a [Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International License][cc-by-nc-nd].

LuizFernandoOliveira/Conversor-USB-UART-SPI-I2C-JTAG
This work is licensed under a [Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International License][cc-by-nc-nd].

LunarKnights/SN65HVD257-breakout
Breakout board for SN65HVD257 CAN transceiver for use with Jetson TX2


m47eus2/m47Board-C031
Custom STM32 Devboard with STM32C031C6T6 MCU, external oscillators, SWD programming interface and basic peripherals

maanavkoladia/FreakyNetworking
The FreakyRTOS and FreakyNetworking are also integrated with TivaWare and ValvanoWare, enabling low-level hardware abstraction and peripheral management on TM4C devices.

Maanvigit/AC-DC-Converter-KiCad
Design and implementation of a full-wave bridge rectifier-based AC-to-DC converter PCB using KiCad, featuring capacitor filtering, 2-layer PCB layout, and ERC/DRC validation.

Maczla/Raspberry_Pi_Pico_Automotive_Interface
Automotive interface board for Raspberry Pi Pico with 12 V power protection, vehicle signal inputs, SWC analog inputs and configurable PWM output.


mahdi-kh1265/780nm-ecdl-electronics
Control, interface, piezo-actuation, and power electronics for POSM's 780 nm Littrow external-cavity diode laser.

MahdiMounzer/sic-half-bridge-dpt
A documented design-to-characterization project: a SiC half-bridge inverter leg with low-inductance 4-layer PCB, progressive bring-up, and DPT characterization (Eon/Eoff, dv/dt, overshoot, conduction losses).

mail4johnv/ATTiny88_Breakout_Board
Kicad files for attiny88_Breakout_board.



makerbus/bus_bridge_encoders_sonar
A PCB that connects a dual H-bridge, dual quadrature shaft encoders and some sonars to a bus.

makeristic/STUSB4500_Breakout
KiCad USB-C Power Delivery sink breakout using STUSB4500, with STEMMA QT I2C, screw-terminal output and RGB indication. Work in progress.

MakersAsylumIndia/MAPusart
USB to UART converter board using CP2102. Micro USB input and 6 pin header output.

makervinod/PCB-LogicLevelShifter
A 6-channel Logic Level Shifter PCB with on-board 3.3V Regulation



MalVM/FlySwatter2SWD_Adapter
An adapter for flyswatter 2 to SWD with trim pot as resistors

mancusoa74/L293D-Breakout
Simple breakout board for L293D to implement a basic DC Motor driver for Ardino/Raspberry Pi