

Relay RS485
- Size
- 57 × 82.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 90
- Nets
- 61
- Pads
- 275
- Tracks, vias
- 361, 207
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 14 Apr 2023
- Updated
- 14 Apr 2023
Overview
Relay RS485 is an open-source printed circuit board by maivananh111, from the maivananh111/PCB_Relay_RS485 repository on GitHub. It is a 2-layer board of 57 × 82.5 mm with 90 parts on 61 nets, routed with 361 tracks and 207 vias.
It is built around the MAX485ED, LM358 and XL1509-3.3, with the RT9193-33GB and SS34 among its other parts. Its parts include 28 resistors, 20 capacitors, 15 diodes, 5 ICs and 4 transistors. It belongs with the interfaces and adapters and home automation and IoT boards and the STM32 boards of this library.
Main components
5MAX485ED
SOP-8-40℃~+85℃ 1 1 1mA 32 4.75V~5.25V 5Mbps Half-Duplex Transceiver ±8kV SOP-8 RS-485 / RS-422 ICs ROHSHTCRS-485 / RS-422 ICsLM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational AmplifierXL1509-3.3
SOP-8-40℃~+125℃@(TJ) 1 150kHz 2A 2mA 3.3V 4.5V~40V Buck Buck Built-in Fixed No SOP-8 DC-DC Converters ROHSUMWDC-DC ConvertersRT9193-33GB
SOT-23-5-40℃~+125℃@(Tj) -50dB@(10kHz) 1 100uVrms 220mV@(300mA) 3.3V 300mA 5.5V 90uA Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSRICHTEKVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
Parts
90| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100nF | Anh_Footprints:C_0603 | C1, C2, C8, C9, C10, C12, C14, C15, C18, C19, C20 |
| 7 | 100 | Anh_Footprints:R_0603 | R5, R6, R7, R12, R14, R17, R20 |
| 7 | 1k | Anh_Footprints:R_0603 | R1, R13, R15, R18, R21, R25, R27 |
| 6 | 10k | Anh_Footprints:R_0603 | R2, R8, R11, R16, R19, R22 |
| 5 | 1N4007 | Anh_Footprints:SOD-123F | D5, D8, D10, D12, D15 |
| 5 | LED | Anh_Footprints:LED_0603 | D6, D7, D9, D11, D13 |
| 4 | 4k7 | Anh_Footprints:R_0603 | R3, R4, R24, R26 |
| 4 | NPN | Anh_Footprints:SOT23-3 | Q1, Q2, Q3, Q4 |
| 4 | Relay_G5NB-1A-E_DC5 | IVS_Footprint:Relay_G5NB-1A-E DC5 | RL1, RL2, RL3, RL4 |
| 3 | 10uF | Anh_Footprints:C_1210 | C4, C6, C13 |
| 3 | D_TVS | Anh_Footprints:D_SMA_TVS | D1, D2, D3 |
| 2 | 22nF | Anh_Footprints:C_0603 | C5, C17 |
| 2 | 47uF | Anh_Footprints:C_1210 | C11, C16 |
| 2 | Fuse | Anh_Footprints:F_1812 | F1, F2 |
| 1 | 10 | Anh_Footprints:R_0603 | R23 |
| 1 | 100k | Potentiometer_SMD:Potentiometer_Bourns_3314J_Vertical | RV1 |
| 1 | 100uF | Capacitor_SMD:CP_Elec_6.3x5.4_Nichicon | C7 |
| 1 | 10k | Potentiometer_SMD:Potentiometer_Bourns_3314J_Vertical | RV2 |
| 1 | 10nF | Anh_Footprints:C_0603 | C3 |
| 1 | 120 | Anh_Footprints:R_0805 | R9 |
| 1 | 1M | Anh_Footprints:R_0603 | R10 |
| 1 | 47k | Anh_Footprints:R_0603 | R28 |
| 1 | ACO | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H4 |
| 1 | H1 | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H3 |
| 1 | H3 | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H5 |
| 1 | H4 | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H6 |
| 1 | LM358 | Anh_Footprints:SOIC-8 | U5 |
| 1 | L_0630 | Anh_Footprints:L_0630 | L1 |
| 1 | MAX485E | Anh_Footprints:SOIC-8 | U2 |
| 1 | OUTPUT_CONN | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-8-5.08_1x08_P5.08mm_Horizontal | J1 |
| 1 | RS485_POWER | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-8-5.08_1x08_P5.08mm_Horizontal | J4 |
| 1 | RT9193-33 | Anh_Footprints:SOT23-5 | U4 |
| 1 | SS34 | Anh_Footprints:D_SMA | D4 |
| 1 | STM32F030F4Px | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U3 |
| 1 | SWD | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | XL1509 | Anh_Footprints:SOIC-8 | U1 |
| 1 | Z3V3 | Anh_Footprints:D_MiniMELF | D14 |
| 1 | reset | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW1 |
| 1 | ~ | Anh_Footprints:CurrentTransformer_THT | CT1 |
Similar boards
- 2 layers93.4 × 87.4 mm

- 2 layers80 × 100 mm

- 2 layers102.5 × 62 mm

Oxygen Monitoring
mosyrf/Oxygen-Monitoring-System
This was my second year project as an electrical engineering student, and it was quite difficult because it used an STM32 controller, which I was not familiar with.
121 parts - 2 layers81.5 × 78.9 mm

Espond32-offboard ssr
nhrobertson/ESPond32
Spiritual Successor to the PondPi. Basic I/O controller for a backyard pond
68 parts - 2 layers95 × 60 mm

- 4 layers38 × 38 mm

- 4 layers100 × 77 mm

- 2 layers109.9 × 134.6 mm

Questions
How big is the Relay RS485 PCB?
It measures 57 × 82.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Relay RS485 use?
90 parts, built around the MAX485ED, LM358, XL1509-3.3 and RT9193-33GB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Relay RS485 KiCad files?
From the maivananh111/PCB_Relay_RS485 repository on GitHub, at the commit this page was made from: the board is Relay_RS485.kicad_pcb and its schematic Relay_RS485.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Relay RS485 design in my own project?
Its repository states no licence, so its author keeps all rights: ask maivananh111 before reusing the design.