Skip to the content

Interfaces and adapters

7,328 boards
  • 4 layers48.3 × 52.9 mmDynaButton, the printed circuit board in 3D

    DynaButton

    manhoosbilli1/dynaboard-button-controller

    Dynaboard - large button/control interface board (102 syms, 590 tracks)

    68 parts
  • 2 layers66.4 × 64.4 mmRPI PICO CARRIER, the printed circuit board in 3D

    RPI PICO CARRIER

    manhoosbilli1/qx-rp2040-carrier

    RP2040 Pico carrier with breakouts and onboard power (Capistor QX line)

    46 parts
  • 2 layers97.6 × 29.6 mmBridge Rectifire, the printed circuit board in 3D

    Bridge Rectifire

    Manideep136/Bridge-Rectifier

    This project is a Bridge Rectifier PCB designed using KiCad. The circuit converts an AC input voltage into DC output voltage using four diodes connected in a bridge configuration.

    11 parts
  • 2 layers51 × 21 mmUSB UART Converter, the printed circuit board in 3D

    USB UART Converter

    Manideep136/USB-to-UART-Converter-

    A compact USB-to-UART converter PCB designed for communication between a computer and microcontroller-based systems such as STM32, ESP32, Arduino, and other embedded development boards.

    19 parts
  • 2 layers50 × 40 mm555-astable, the printed circuit board in 3D

    555-astable

    manoj020218/KiCad-Ai-Agent

    A minimal, functional breakout board for the ESP32-C3-WROOM-02 Wi-Fi/BLE module — reset, boot-mode entry, and a UART header for an external USB-serial adapter.

    7 parts
  • 2 layers49.5 × 52 mmEsp32, the printed circuit board in 3D

    Esp32

    Manushree-J/ESP32-Development-Board-PCB

    Custom ESP32 development board designed in KiCad, featuring USB, OLED, CAN, UART, SPI, I2C, and power-management interfaces

    27 parts
  • 2 layers25.8 × 35 mmEthercon breakout, the printed circuit board in 3D

    Ethercon breakout

    marekjansky/NE8FAH_breakout

    Breakout board for each pair of the ethercon connector

    5 partsGPL-3.0
  • 2 layers66 × 37.6 mmController, the printed circuit board in 3D

    Controller

    marenz2569/led-controller-ethernet

    led-controller-ethernet is the hardware to the avr-ethernet-licht firmware https://github.com/marenz2569/avr-ethernet-licht

    35 partsLGPL-2.1
  • 2 layers36.2 × 30.5 mmNRF24-Breakout, the printed circuit board in 3D

    NRF24-Breakout

    margyle/nRF24-Breakout

    Kicad nRF24 breakout board project. Designed while taking the Udemy course "Tech Explorations: Kicad Like a Pro"

    4 parts
  • 4 layers101 × 80.5 mmMari stm32 datalogger, the printed circuit board in 3D

    Mari stm32 datalogger

    Marimugeshbabu/STM32-Industrial-Data-Logger

    4-layer STM32 Industrial Data Logger designed in KiCad 9 with RS485, microSD, voltage/current sensing and protection circuitry.

    57 parts
  • 2 layers58.4 × 45.7 mmAVR ISP Adapter, the printed circuit board in 3D

    AVR ISP Adapter

    mariusgreuel/AVR-ISP-Adapter

    AVR ISP Adapter

    12 partsGPL-3.0
  • 2 layers68.6 × 73.7 mm0027 PLCC84 Breakout, the printed circuit board in 3D

    0027 PLCC84 Breakout

    MarkD833/various_package_breakout_boards

    Various PLCC breakout boards

    9 partsGPL-3.0
  • 2 layers31.6 × 45.3 mmSTLinkV3-Mini RS-485, the printed circuit board in 3D

    STLinkV3-Mini RS-485

    martonmiklos/stlinkv3_mods_rs_485

    STLinkV3 mods - RS-485 shield

    19 parts
  • 2 layers43.2 × 33 mmXBeeBreakoutBoard, the printed circuit board in 3D

    XBeeBreakoutBoard

    MassiveStorage/XBeeBreakoutBoard

    XBee Breakout Board Adapter 2,0mm to 2,54mm - KiCAD files

    4 parts
  • 2 layersWaterputv4Schematics, the printed circuit board in 3D

    Waterputv4Schematics

    mathiasvan/LevelmetingWaterputV4

    ESP32-based water well level monitoring using a QDY30A RS485 sensor. Reads water level, uploads data to ThingSpeak, and supports remote logging and commands via Telnet (PuTTY).

    4 partsGPL-3.0
  • 4 layers127 × 116.1 mmDisco TFT Adapter, the printed circuit board in 3D

    Disco TFT Adapter

    MatiMcFly/Disco_TFT_Adapter

    Contains a KiCAD project which connects the display plug of a STM32H747 DISCO board to a 6'' round TFT LCD

    34 parts
  • 2 layers61.9 × 65 mmT3-harness adapter, the printed circuit board in 3D

    T3-harness adapter

    MatiMcFly/t3-harness-adapter

    KiCAD project used for a t3 cabling harness adapter

    13 parts
  • 4 layers162 × 100 mmH bridge, the printed circuit board in 3D

    H bridge

    matterwaves/bias_coil_control_pcb

    3-channel current control

    54 parts
  • 2 layers43.2 × 17.8 mmFtdiTranslator, the printed circuit board in 3D

    FtdiTranslator

    matthijskooijman/FtdiTranslator

    Voltage level converter for FTDI-style 6-pin serial connections

    45 parts
  • 2 layers25.4 × 35.6 mmJTAG, the printed circuit board in 3D

    JTAG

    matthijskooijman/pinoccio-jtag-backpack

    Schematic and board design for a JTAG backpack for the Pinoccio board

    5 parts
  • 2 layers30 × 40 mmToads breakout, the printed circuit board in 3D

    Toads breakout

    mattsoftware/toads_breakout

    21 parts