

3-channel current control
- Size
- 162 × 100 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 54
- Nets
- 35
- Pads
- 235
- Tracks, vias
- 350, 8
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 3 Jun 2025
- Updated
- 9 Jul 2025
Overview
H bridge is an open-source printed circuit board by matterwaves, from the matterwaves/bias_coil_control_pcb repository on GitHub. It is a 4-layer board of 162 × 100 mm with 54 parts on 35 nets, routed with 350 tracks and 8 vias.
It is built around the IRF510, SN74ACT04N and IRF9610PBF. Its parts include 13 connectors, 12 transistors, 9 capacitors, 9 resistors and 7 ICs. It belongs with the interfaces and adapters boards of this library.
Main components
3IRF510
TO-220AB-55℃~+175℃ 1 N-channel 100V 180pF 43W 4V 5.6A 540mΩ@10V 8.3nC@10V TO-220AB MOSFETsonsemiMOSFETsSN74ACT04N
PDIP-14-40℃~+85℃ 1 24mA 24mA 2V 2uA 4.5V~5.5V 6 74ACT 8.5ns@5V,50pF 800mV PDIP-14 Inverters ROHSTexas InstrumentsInvertersIRF9610PBF
TO-220-55℃~+150℃ 1 P-Channel 1.8A 11nC@10V 15pF 170pF 200V 20W 3Ω@10V 4V 50pF P-Channel TO-220 MOSFETs ROHSVishay IntertechnologyMOSFETs
Parts
54| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8, R9 |
| 9 | 1u | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C1, C2, C3, C4, C5, C6, C7, C8, C9 |
| 9 | Conn_Coaxial | Connector_Coaxial:SMA_Molex_73251-1153_EdgeMount_Horizontal | J6, J7, J8, J9, J10, J11, J12, J13, J14 |
| 6 | 2N7000 | Package_TO_SOT_THT:TO-92_Inline | Q3, Q4, Q6, Q8, Q10, Q12 |
| 6 | IRF510 | Package_TO_SOT_THT:TO-220-3_Vertical | U1, U2, U4, U5, U6, U7 |
| 6 | IRF9610 | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2, Q5, Q7, Q9, Q11 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H3, H4, H5, H6 |
| 2 | Conn_01x10_Pin | Connector_JST:JST_ZH_B10B-ZR_1x10_P1.50mm_Vertical | J1, J2 |
| 1 | Conn_01x03 | Connector_Wire:SolderWire-0.75sqmm_1x03_P4.8mm_D1.25mm_OD2.3mm | J5 |
| 1 | Conn_01x05 | Connector_Wire:SolderWire-0.75sqmm_1x05_P4.8mm_D1.25mm_OD2.3mm | J4 |
| 1 | SN74ACT04N | Package_DIP:DIP-14_W7.62mm_Socket_LongPads | U3 |
More from matterwaves/bias_coil_control_pcb
4- 4 layers100 × 100 mm

- 4 layers100 × 100 mm

- 4 layers100 × 100 mm

- 4 layers100 × 100 mm

Similar boards
- 2 layers99.6 × 79.7 mm

Amplified WSPR Beacon
kholia/Easy-Beacons-STEM
Easy-Beacons project adapted for STEM education. Powered by Raspberry Pi Pico (W) boards. WSPR + FT8 beacons for science (TM).
34 parts13 - 2 layers190 × 75 mm

Q17-TURBO
stefaweb/Q17-Amplifier
The Q17 is an error correction HIFI amplifier based on the QUAD405 current dumping principle.
109 parts25GPL-3.0 - 6 layers200 × 100 mm

- 6 layers200 × 100 mm

- 2 layers150 × 40 mm

- 2 layers100 × 100 mm

- 2 layers50.8 × 52.1 mm

- 2 layers156.2 × 58.3 mm

Questions
How big is the H bridge PCB?
It measures 162 × 100 mm and has 4 copper layers, 1.6 mm thick.
What parts does the H bridge use?
54 parts, built around the IRF510, SN74ACT04N and IRF9610PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the H bridge KiCad files?
From the matterwaves/bias_coil_control_pcb repository on GitHub, at the commit this page was made from: the board is H_bridge/H_bridge.kicad_pcb and its schematic H_bridge/H_bridge.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the H bridge design in my own project?
Its repository states no licence, so its author keeps all rights: ask matterwaves before reusing the design.