Skip to the content
123

IRF510

onsemiExtended

-55℃~+175℃ 1 N-channel 100V 180pF 43W 4V 5.6A 540mΩ@10V 8.3nC@10V TO-220AB MOSFETs

JLCPCBLCSC
Part id
onsemi/IRF510
Category
MOSFETs
Package
TO-220AB
Pins
3
In stock
0 at JLCPCB (C3290480)
Used on
30 open-source boards

Overview

The IRF510 is a MOSFET made by onsemi in a TO-220AB package with 3 pins. -55℃~+175℃ 1 N-channel 100V 180pF 43W 4V 5.6A 540mΩ@10V 8.3nC@10V TO-220AB MOSFETs.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Q_NMOS_1G_2D_3S, from PCBKit's generic symbols) and its footprint (EasyEDA_Cloud:TO-220-3_L9.9-W4.5-P2.54-L, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C3290480). 30 open-source boards in 20 repositories on GitHub use it.

Symbol

Pinmap_Generic:Q_NMOS_1G_2D_3SFrom PCBKit's generic symbols

Footprint

123
EasyEDA_Cloud:TO-220-3_L9.9-W4.5-P2.54-LFrom EasyEDA

Pinout

3
The pins of the IRF510
PinNameType
1GInput
2DPassive
3SPassive

Open-source boards using it

30See all 30
  • 2 layers89.2 × 63.5 mmHF PA v10, the printed circuit board in 3D

    HF PA v10

    kholia/HF-PA-v10

    HF-PA-v10 ;) Is this the end of the search for a 5W Digital PA? HF-PA-v10 is now a rugged 10W PA! We also do 100W+ now ;)

    59 parts24
  • 2 layers99.6 × 84.7 mmAmplified WSPR Beacon v4, the printed circuit board in 3D

    Amplified WSPR Beacon v4

    kholia/Easy-Beacons-STEM

    Easy-Beacons project adapted for STEM education. Powered by Raspberry Pi Pico (W) boards. WSPR + FT8 beacons for science (TM).

    54 parts13
  • 2 layers102 × 72 mmHF PA Combined, the printed circuit board in 3D

    HF PA Combined

    kholia/HF-PA-v6

    RF "Lego" blocks. Quite-Linear HF broadband RF amplifier experiments for higher bands.

    40 parts11
  • 2 layers114 × 89 mmAyn-4b, the printed circuit board in 3D

    Ayn-4b

    afiskon/ayn-4b

    Portable QRP CW Transceiver

    278 parts7MIT
  • 2 layers90 × 99.9 mmHF PA v10, the printed circuit board in 3D

    HF PA v10

    kholia/Global-Communications-Transceiver

    Open-source files for Global Communications Transceiver

    102 parts6GPL-3.0
  • 2 layers149.4 × 60 mmRfamp3, the printed circuit board in 3D

    Rfamp3

    paulh002/IRF510-rf-amplifier

    71 parts6
  • 2 layers203.2 × 82.6 mmDmxfire16, the printed circuit board in 3D

    Dmxfire16

    propane-and-electrons/dmxfire16

    16 channel RS-485 (DMX512 compatible) SSR.

    159 parts6
  • 2 layers203.2 × 82.6 mmWifire16, the printed circuit board in 3D

    Wifire16

    propane-and-electrons/wifire16

    16 channel Arduino-compatible wireless SSR.

    164 parts6

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the IRF510?

Yes. The symbol is Pinmap_Generic:Q_NMOS_1G_2D_3S and the footprint EasyEDA_Cloud:TO-220-3_L9.9-W4.5-P2.54-L, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the IRF510?

TO-220AB, with 3 pins. Its footprint is drawn on this page.

Where can I order the IRF510?

JLCPCB lists it as part C3290480, with 0 in stock; the sellers' links on this page open their listings.

What can replace the IRF510?

Parts like it in the library: the AUP065N10 by ANHI, the WGP10N20 by Wild Goose, the WGP10N50SE by Wild Goose and the WGP12N65SE by Wild Goose. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the IRF510?

30 boards in 20 repositories on GitHub; the most starred are listed on this page, with their KiCad files.