Skip to the content
2 layers51 × 21 mmUSB UART Converter, the printed circuit board in 3D

A compact USB-to-UART converter PCB designed for communication between a computer and microcontroller-based systems such as STM32, ESP32, Arduino, and other embedded development boards.

Size
51 × 21 mm
Copper layers
2
Thickness
1.6 mm
Parts
19
Nets
37
Pads
115
Tracks, vias
165, 17
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
21 Sep 2026
Updated
21 Sep 2026

Overview

USB UART Converter is an open-source printed circuit board by Manideep136, from the Manideep136/USB-to-UART-Converter- repository on GitHub. It is a 2-layer board of 51 × 21 mm with 19 parts on 37 nets, routed with 165 tracks and 17 vias.

Its parts include 7 resistors, 5 diodes, 4 capacitors, 2 connectors and 1 IC. It belongs with the interfaces and adapters boards of this library.

README

README.md

USB-to-UART-Converter

A compact USB-to-UART converter PCB designed for communication between a computer and microcontroller-based systems such as STM32, ESP32, Arduino, and other embedded development boards.

Features USB interface for connection to a PC or laptop UART serial communication interface TX and RX signal breakout Compact PCB design Designed using KiCad Suitable for programming, debugging, and serial communication Easy connection to 3.3 V / 5 V UART-based systems Applications

This USB-to-UART converter can be used for:

STM32 development and debugging ESP32 serial communication Arduino development Embedded-system debugging Serial terminal communication Firmware programming UART-based sensor/module communication Interface USB Side

The USB interface provides:

USB 5 V power USB D+ USB D− GND

PCB Design

The PCB was designed using KiCad, including:

Schematic design Component selection PCB layout Routing Design Rule Check (DRC) Gerber generation

Parts

19
QtyValueFootprintReferences
41kResistor_SMD:R_0201_0603MetricR4, R5, R6, R7
3100nfCapacitor_SMD:C_0603_1608MetricC2, C3, C4
31N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD6, D7, D8
25.1KResistor_SMD:R_0201_0603MetricR1, R2
2LEDLED_SMD:LED_0201_0603MetricD1, D2
1100ufCapacitor_SMD:C_0603_1608MetricC1
110kResistor_SMD:R_0201_0603MetricR3
1CP2102N-Axx-xQFN28Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mmU1
1Conn_01x05_PinConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_HorizontalJ2
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12J1

Similar boards

  • 2 layers43.9 × 27.7 mmTcd1304-4v, the printed circuit board in 3D

    Tcd1304-4v

    OpnTec/open-spectrometer-hardware

    Open source VIS spectrometer

    19 parts1.5k
  • 2 layers50 × 60 mmDebate Device, the printed circuit board in 3D

    Debate Device

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    19 parts915
  • 2 layers102.9 × 96.7 mmISA adapter, the printed circuit board in 3D

    ISA adapter

    polpo/picogus

    Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support

    19 parts805
  • 2 layers60 × 39 mmPs2usb, the printed circuit board in 3D

    Ps2usb

    rasteri/HIDman

    Adapting USB devices to work on old computers

    19 parts432
  • 2 layers70.1 × 43.2 mmIaq device, the printed circuit board in 3D

    Iaq device

    nkitanov/iaq_board

    IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality

    19 parts396
  • 2 layers80 × 80 mmGB BRK CPU G1, the printed circuit board in 3D

    GB BRK CPU G1

    Gekkio/gb-hardware

    Game Boy -related custom hardware by gekkio

    19 parts379CC-BY-4.0
  • 2 layers25.4 × 25.4 mmIna169, the printed circuit board in 3D

    Ina169

    Ardumower/ardumower

    Develop an open source robotic lawn mower (HW+SW reference platform)

    19 parts282
  • 2 layers58.4 × 28.6 mmNew rele, the printed circuit board in 3D

    New rele

    zmaker/arduino_cookbook

    gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

    19 parts269

Questions

How big is the USB UART Converter PCB?

It measures 51 × 21 mm and has 2 copper layers, 1.6 mm thick.

What parts does the USB UART Converter use?

19 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the USB UART Converter KiCad files?

From the Manideep136/USB-to-UART-Converter- repository on GitHub, at the commit this page was made from: the board is USB-UART Converter/USB-UART Converter.kicad_pcb and its schematic USB-UART Converter/USB-UART Converter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the USB UART Converter design in my own project?

Its repository states no licence, so its author keeps all rights: ask Manideep136 before reusing the design.