

Controller
led-controller-ethernet is the hardware to the avr-ethernet-licht firmware https://github.com/marenz2569/avr-ethernet-licht
- Size
- 66 × 37.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 20
- Pads
- 113
- Tracks, vias
- 300, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 23 Jul 2017
- Updated
- 30 Aug 2020
Overview
Controller is an open-source printed circuit board by marenz2569, from the marenz2569/led-controller-ethernet repository on GitHub, published under the LGPL-2.1 licence. It is a 2-layer board of 66 × 37.6 mm with 35 parts on 20 nets, routed with 300 tracks and 0 vias.
It is built around the MCP16331-E/CH, TLV70033DDC and BAS70-06, with the BAV99 and P6SMB36CA among its other parts. Its parts include 10 connectors, 8 capacitors, 6 diodes, 4 resistors and 2 ICs. It belongs with the interfaces and adapters boards of this library.
Main components
5MCP16331-E/CH
SOT-23-6-40℃~+125℃ 1 1mA 2V~24V 4.4V~50V 500kHz 500mA Adjustable Buck Buck Built-in No SOT-23-6 DC-DC Converters ROHSMicrochip TechnologyDC-DC ConvertersTLV70033DDC
SOT-23-5-40℃~+125℃@(Tj) 1 200mA 3.3V 31uA 48uVrms 5.5V 68dB Fixed Over Current Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsBAS70-06
SOT-231 Pair Common Anode 100mA 10uA@70V 1V@15mA 70V 70mA SOT-23 Schottky Diodes ROHSNexperiaSchottky DiodesBAV99
SOT-231 Pair Series Connection 1.25V@150mA 100V 215mA 250mW 4A 4ns 500nA@80V SOT-23 Switching Diodes ROHSNexperiaSwitching DiodesP6SMB36CA
DO-214AA(SMB)-55℃~+150℃ 12A@10/1000us 30.8V 37.8V 49.9V 5uA 600W@10/1000us Bidirectional IEC 61000-4-2 TVS DO-214AA(SMB) ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)
README
README.mdled-controller-ethernet
led-controller-ethernet is the hardware to the avr-ethernet-licht firmware.
Its purpurse is to control ws2812 protocol compatible leds via a udp protocol.
In addition to the pcb the hardware uses an arduino pro mini and an enc28j60 breakout board.
flexibilty
| input voltage | output voltage | bridges | notes |
|---|---|---|---|
| 12-36V | 12-36V | JP1 | |
| 12-36V | 5V | JP2 | |
| 5V | 5V | JP1 and JP2 | do not populate voltage regulator |
todo
- test if regulator may be populated when inserting 5 Volts to V_in and bridging JP1 and JP2
- add option for rgb leds with 3 mosfets.
license
see lgplv2.1 in LICENSE file.
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | CONN_01X01 | Mounting_Holes:MountingHole_4.3mm_M4_ISO14580_Pad | P6, P7, P8, P9 |
| 3 | 100n | Capacitors_SMD:C_0805_HandSoldering | C3, C5, C8 |
| 2 | 10k | Resistors_SMD:R_0805_HandSoldering | R3, R4 |
| 2 | 10u | Capacitors_SMD:C_1210_HandSoldering | C1, C6 |
| 2 | 50R | Resistors_SMD:R_0805_HandSoldering | R1, R2 |
| 2 | CONN_01X12 | Socket_Strips:Socket_Strip_Straight_1x12_Pitch2.54mm | P3, P5 |
| 2 | SS24/SS26 | Diodes_SMD:D_SMB_Handsoldering | D1, D3 |
| 1 | 100u | Capacitors_SMD:CP_Elec_8x10 | C2 |
| 1 | 33u | Choke_SMD:Choke_SMD_Wuerth-WE-PD2-Typ-L | L1 |
| 1 | 43k | Resistors_SMD:R_0805_HandSoldering | R_top1 |
| 1 | 470u | Capacitors_SMD:CP_Elec_8x10 | C7 |
| 1 | 8k2 | Resistors_SMD:R_0805_HandSoldering | R_bot1 |
| 1 | AVR-ISP-10 | Connect:IDC_Header_Straight_10pins | CON1 |
| 1 | BAS70-06 | TO_SOT_Packages_SMD:SOT-23_Handsoldering | D2 |
| 1 | BAV99 | TO_SOT_Packages_SMD:SOT-23_Handsoldering | D4 |
| 1 | BZX84C 8V2 | Diodes_SMD:D_SOT-23_ANK | D5 |
| 1 | CONN_02X05 | Socket_Strips:Socket_Strip_Straight_2x05_Pitch2.54mm | P4 |
| 1 | JUMPER | Connect:GS2 | JP1 |
| 1 | JUMPER_NO_Small | Connect:GS2 | JP2 |
| 1 | LEDOUT | RND_Connectors:3_5.08mm | P2 |
| 1 | MCP16331 | TO_SOT_Packages_SMD:SOT-23-6_Handsoldering | U1 |
| 1 | P6SMB36CA | Diodes_SMD:D_SMB_Handsoldering | D6 |
| 1 | TLV70033DDC | TO_SOT_Packages_SMD:SOT-23-5_HandSoldering | U2 |
| 1 | VIN | RND_Connectors:2_5.08mm | P1 |
| 1 | n.b. | Capacitors_SMD:C_0805_HandSoldering | C4 |
Similar boards
- 4 layers71.8 × 54.6 mm

- 4 layers100 × 77 mm

- 2 layers100 × 100 mm

- 4 layers42 × 42 mm

- 2 layers105 × 47 mm

Modulo2-powamp
nodep/myAmp
Battery powered, solid state, guitar amplifier schematic and PCB
76 parts4GPL-3.0 - 2 layers45.9 × 14.2 mm

- 4 layers18.8 × 35.8 mm

- 4 layers18.8 × 35.8 mm

Mdbt42 breakout
shraken/mdbt42q_bobby
A MDBT42Q break-out board for Nordic nRF52832 chip family
18 partsMIT
Questions
How big is the Controller PCB?
It measures 66 × 37.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Controller use?
35 parts, built around the MCP16331-E/CH, TLV70033DDC, BAS70-06 and BAV99. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Controller KiCad files?
From the marenz2569/led-controller-ethernet repository on GitHub, at the commit this page was made from: the board is controller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Controller design in my own project?
Its repository publishes it under the LGPL-2.1 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).