

Mdbt40 breakout
A MDBT40 break-out board for Nordic nRF51 chip family
- Size
- 18.8 × 35.8 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 45
- Pads
- 103
- Tracks, vias
- 182, 20
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 8 Oct 2016
- Updated
- 9 Oct 2016
Overview
Mdbt40 breakout is an open-source printed circuit board by shraken, from the shraken/mdbt40_bobby repository on GitHub, published under the MIT licence. It is a 4-layer board of 18.8 × 35.8 mm with 20 parts on 45 nets, routed with 182 tracks and 20 vias.
It is built around the TLV70033DDC. Its parts include 9 capacitors, 3 resistors, 2 ICs, 2 connectors and 2 inductors. It belongs with the interfaces and adapters boards of this library.
Main components
1README
README.mdmdbt40_bobby
A simple break-out board in KiCad EDA for developing Nordic nRF51 BLE projects using the MDBT40 module. Includes external 32.768 kHz watch crystal and components for internal DC/DC operation. Breaks out 17 pins from the MDBT40 module for easy prototyping.
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1uF | Capacitors_SMD:C_0603 | C1, C4, C6 |
| 2 | 18pF | Capacitors_SMD:C_0603 | C8, C9 |
| 2 | CONN_01X12 | Pin_Headers:Pin_Header_Straight_1x12 | P1, P2 |
| 1 | 0.1uF | Capacitors_SMD:C_0603 | C3 |
| 1 | 0R_NM | Resistors_SMD:R_0603 | R2 |
| 1 | 100nF | Capacitors_SMD:C_0603 | C2 |
| 1 | 100pF | Capacitors_SMD:C_0603 | C7 |
| 1 | 10uH | Capacitors_SMD:C_0603 | L1 |
| 1 | 12k | Resistors_SMD:R_0603 | R3 |
| 1 | 15nH | Capacitors_SMD:C_0603 | L2 |
| 1 | 32.768kHz | watch_crystals:ABS07-LR-32.768kHz-6-1-T | Y1 |
| 1 | 4.7k | Resistors_SMD:R_0603 | R1 |
| 1 | 47nF | Capacitors_SMD:C_0603 | C5 |
| 1 | LED | LEDs:LED_0603 | D1 |
| 1 | MDBT40 | raytac:MDBT40 | U1 |
| 1 | TLV70033DDC | TO_SOT_Packages_SMD:SOT-23-5 | U2 |
Similar boards
- 2 layers45.9 × 14.2 mm

- 2 layers66 × 37.6 mm

Controller
marenz2569/led-controller-ethernet
led-controller-ethernet is the hardware to the avr-ethernet-licht firmware https://github.com/marenz2569/avr-ethernet-licht
35 partsLGPL-2.1 - 4 layers18.8 × 35.8 mm

Mdbt42 breakout
shraken/mdbt42q_bobby
A MDBT42Q break-out board for Nordic nRF52832 chip family
18 partsMIT - 2 layers27.4 × 33.5 mm

SensactSe
klaus-liebler/sensact
Es gibt vier Namespaces für Nachrichten "REQUEST" und "RESPONSE", "EVENT" und "ACKNOWLEDGE". Dies wird mit den beiden LSB des Versions-Namespace-Bytes erklärt (Somit bleiben 64 Versionierungsmöglichkeiten) Alle vier…
25 parts4Apache-2.0 - 4 layers100 × 100 mm

- 4 layers44.8 × 55.9 mm

Main project
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
20 parts915 - 4 layers22.9 × 50.8 mm

Lg hvac esp32
JanM321/esphome-lg-controller
Wired controller for LG HVAC units using ESPHome and ESP32
20 parts2920BSD - 4 layers23.3 × 21.6 mm

Questions
How big is the Mdbt40 breakout PCB?
It measures 18.8 × 35.8 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Mdbt40 breakout use?
20 parts, built around the TLV70033DDC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mdbt40 breakout KiCad files?
From the shraken/mdbt40_bobby repository on GitHub, at the commit this page was made from: the board is hardware/v0.1/source/mdbt40_breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mdbt40 breakout design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).