
MCP16331-E/CH
Microchip TechnologyExtended
-40℃~+125℃ 1 1mA 2V~24V 4.4V~50V 500kHz 500mA Adjustable Buck Buck Built-in No SOT-23-6 DC-DC Converters ROHS
- Part id
- microchip/MCP16331-E/CH
- Category
- DC DC Converters
- Package
- SOT-23-6
- Pins
- 6
- In stock
- 5,649 at JLCPCB (C105695)
- Used on
- 6 open-source boards
Overview
The MCP16331-E/CH is a DC DC Converter made by Microchip Technology in a SOT-23-6 package with 6 pins. -40℃~+125℃ 1 1mA 2V~24V 4.4V~50V 500kHz 500mA Adjustable Buck Buck Built-in No SOT-23-6 DC-DC Converters ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:MCP16301T-I_CHY, from EasyEDA) and its footprint (Package_TO_SOT_SMD:SOT-23-6, from KiCad's library), ready for a KiCad board. 5,649 are in stock at JLCPCB (part C105695). 6 open-source boards in 4 repositories on GitHub use it.
Symbol
Footprint
Pinout
6| Pin | Name | Type |
|---|---|---|
| 1 | BOOST | Unspecified |
| 2 | GND | Unspecified |
| 3 | VFB | Unspecified |
| 4 | EN | Unspecified |
| 5 | VIN | Unspecified |
| 6 | SW | Unspecified |
Open-source boards using it
6- 2 layers100 × 100 mm

- 2 layers66 × 37.6 mm

Controller
marenz2569/led-controller-ethernet
led-controller-ethernet is the hardware to the avr-ethernet-licht firmware https://github.com/marenz2569/avr-ethernet-licht
35 partsLGPL-2.1 - 4 layers42 × 42 mm

- 2 layers105 × 47 mm

Modulo2-powamp
nodep/myAmp
Battery powered, solid state, guitar amplifier schematic and PCB
76 parts4GPL-3.0 - 2 layers84 × 52 mm

Modulo3-power
nodep/myAmp
Battery powered, solid state, guitar amplifier schematic and PCB
31 parts4GPL-3.0 - 4 layers50 × 50 mm

Parts like it
8TPS562201DDC
TSOT-23-6-40℃~+125℃@(TJ) 1 2A 380uA 4.5V~17V 580kHz 768mV~7V Adjustable Buck Built-in Overcurrent Protection、Light load efficient mode、Cycle-by-cycle current limiting、Hiccup current limiting Step-down type Yes TSOT-23-6 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersTPS561201DDCR
TSOT-23-6-40℃~+125℃ 1 1A 380uA 4.5V~17V 580kHz 760mV~7V Adjustable Buck Buck Built-in Yes TSOT-23-6 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersSX1308
SOT-23-6-40℃~+85℃ 1 1.2MHz 100uA 2A 2V~24V Adjustable Boost Boost Built-in No SOT-23-6 DC-DC Converters ROHSSXDC-DC ConvertersETA8120S2G
SOT23-6-40℃~+85℃ 1 177uA 2A 4.5V~18V 600kHz Adjustable Buck Buck Built-in Yes SOT23-6 DC-DC Converters ROHSetasolutionDC-DC ConvertersLN2220PAR
SOT-23-6L-40℃~+80℃@(TA) 1 1.2MHz 100uA 2.5V~28V 2A 2V~24V Adjustable Boost Boost Built-in SOT-23-6L DC-DC Converters ROHSNATLINEARDC-DC ConvertersTX4137
SOT-23-6-40℃~+125℃@(TA) 1 5.5V~60V 600mA 700uA 800kHz~1.2MHz Adjustable Buck Buck Built-in No SOT-23-6 DC-DC Converters ROHSXDSDC-DC ConvertersTPS54302DDC
TSOT-23-6-40℃~+125℃@(TJ) 1 3A 4.5V~28V 400kHz 45uA Adjustable Buck Buck Built-in Yes TSOT-23-6 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersMT2492
SOT-23-6-40℃~+85℃@(TA) 1 2A 4.5V~16V 600kHz Adjustable Buck Buck Built-in Yes SOT-23-6 DC-DC Converters ROHS西安航天民芯DC-DC Converters
Questions
Is there a KiCad symbol and footprint for the MCP16331-E/CH?
Yes. The symbol is EasyEDA_Cloud:MCP16301T-I_CHY and the footprint Package_TO_SOT_SMD:SOT-23-6, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the MCP16331-E/CH?
SOT-23-6, with 6 pins. Its footprint is drawn on this page.
Where is the MCP16331-E/CH datasheet?
Microchip Technology publishes it: the Datasheet link on this page opens it.
Where can I order the MCP16331-E/CH?
JLCPCB lists it as part C105695, with 5,649 in stock; the sellers' links on this page open their listings.
What can replace the MCP16331-E/CH?
Parts like it in the library: the TPS562201DDC by Texas Instruments, the TPS561201DDCR by Texas Instruments, the SX1308 by SX and the ETA8120S2G by etasolution. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the MCP16331-E/CH?
6 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.