Skip to the content
2 layers25.8 × 35 mmEthercon breakout, the printed circuit board in 3D

Breakout board for each pair of the ethercon connector

Size
25.8 × 35 mm
Copper layers
2
Thickness
1.6 mm
Parts
5
Nets
9
Pads
23
Tracks, vias
40, 6
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
12 Mar 2024
Updated
26 Mar 2024

Overview

Ethercon breakout is an open-source printed circuit board by marekjansky, from the marekjansky/NE8FAH_breakout repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 25.8 × 35 mm with 5 parts on 9 nets, routed with 40 tracks and 6 vias.

It is built around the NE8FAH. It belongs with the interfaces and adapters boards of this library.

Main components

1

README

README.md

NE8FAH_breakout

Breakout board for each pair of the ethercon connector

Parts

5
QtyValueFootprintReferences
1BLUEConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ104
1BROWNConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ105
1GREENConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ103
1NE8FAHfootprints:NEUTRIK_NE8FAHJ101
1ORANGEConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ102

Similar boards

  • 4 layers250.8 × 30 mmLedTubeFixture, the printed circuit board in 3D

    LedTubeFixture

    adamvotocek/Open-Tube-Light

    work in progress

    201 parts
  • 4 layers72 × 22 mmLink poe, the printed circuit board in 3D

    Link poe

    versioduo/connector

    ⚡ V2 Link and Power connectors

    39 parts
  • 2 layers128.1 × 87 mmVirgil Controller, the printed circuit board in 3D

    Virgil Controller

    da-penguin-guy/Proteus

    The Proteus is a modular collection of PCBs that will be used to develop the Virgil sound Protocol

    78 parts3
  • 2 layers98 × 27 mmXy limit, the printed circuit board in 3D

    Xy limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    5 parts3.7k
  • 2 layers21 × 33 mm24g2usb pico2w, the printed circuit board in 3D

    24g2usb pico2w

    joypad-ai/joypad-os

    Universal controller firmware for building adapters, dongles, and custom controllers.

    5 parts1.7kApache-2.0
  • 2 layers53.2 × 59.6 mmA10 OLinuXino Lime Rev B SHIELD TEMPLATE, the printed circuit board in 3D

    A10 OLinuXino Lime Rev B SHIELD TEMPLATE

    OLIMEX/OLINUXINO

    OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

    5 parts1.5k
  • 2 layers30 × 11 mmMain control board servo tester, the printed circuit board in 3D

    Main control board servo tester

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    5 parts1.1k
  • 2 layers78.8 × 35.3 mmKiCadTest, the printed circuit board in 3D

    KiCadTest

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    5 parts915

Questions

How big is the Ethercon breakout PCB?

It measures 25.8 × 35 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Ethercon breakout use?

5 parts, built around the NE8FAH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Ethercon breakout KiCad files?

From the marekjansky/NE8FAH_breakout repository on GitHub, at the commit this page was made from: the board is ethercon_breakout.kicad_pcb and its schematic ethercon_breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Ethercon breakout design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).