
Nrf bga
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

AVR ISP Adapter
AVR ISP Adapter is an open-source printed circuit board by mariusgreuel, from the mariusgreuel/AVR-ISP-Adapter repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 58.4 × 45.7 mm with 12 parts on 19 nets, routed with 156 tracks and 12 vias.
It belongs with the interfaces and adapters boards of this library.
This repository contains the design files for an AVR ISP Adapter that allows you to connect your Atmel ICE programmer to standard 6-pin and 10-pin AVR ISP headers.
This adapter is also designed to interface with the Digital Discovery Logic Analyzer from Digilent, enabling you to easily measure the signals during programming.
The rendered image of the adapter looks like this:

You can find the KiCad schematic and PCB layout files in the PCB folder.
If you just want to build an adapter yourself, you can use my Gerber Plots and send them to your favorite PCB manufacturer.
The AVR ISP Adapter schematic and PCB layout is released under the GNU GPLv3.
Copyright 2025 Marius Greuel.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | M3 | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 1 | Atmel-ICE | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical | J6 |
| 1 | Digital Discovery | Connector_PinSocket_2.54mm:PinSocket_2x06_P2.54mm_Horizontal | J1 |
| 1 | Header 1 | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Vertical | J2 |
| 1 | Header 2 | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Vertical | J3 |
| 1 | JTAG Debug | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J8 |
| 1 | SPI | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J4 |
| 1 | SPI Debug | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J7 |
| 1 | SPI/TPI | Connector_IDC:IDC-Header_2x03_P2.54mm_Vertical | J5 |

github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!


google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards



hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
It measures 58.4 × 45.7 mm and has 2 copper layers, 1.6 mm thick.
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mariusgreuel/AVR-ISP-Adapter repository on GitHub, at the commit this page was made from: the board is pcb/avr_isp_adapter.kicad_pcb and its schematic pcb/avr_isp_adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).