
Picalor pcb
ul-gh/Picalor
Picalor - Multi-Channel Heat Balance Calorimetry on the Raspberry Pi
Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

ul-gh/Picalor
Picalor - Multi-Channel Heat Balance Calorimetry on the Raspberry Pi

cfbird/ULNA-Lband-2S
Two-stage ultra-low-noise amplifier for 1.0 – 2.2 GHz, built around a pair of Skyworks SKY67151-396LF GaAs pHEMT LNAs.

Keith-Khadar/Gh05t
This project aims to design and develop a wearable EEG headset with an integrated data acquisition system. Using OpenBCI Ultracortex Mark IV as a template, the headset is designed to map the electrodes according to the…

ComplacencyKillz/GhostMesh
Meshtastic + Flipper Zero integration for offline red team comms — remote Bad USB, killswitch, and mesh-based C2 over LoRa

gh0stless/Rebirth-RB338-Controller
an ulimate MIDI controller for Rebirth RB-338

BoomBoxRobotics/Anubis
Anubis is a project to create the ultimate open source RC controller utilizing inexpensive consumer parts and clever programming.




ulyssecrn/PCBGolf
comma.ai PCBGolf entry: 4-port CAN-FD dev board on a 35 × 43 mm, 4-layer PCBA. KiCad 10.

polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support

HandHeldLegend/GC-Ultimate
The 3D shell, buttons, and other associated models are licensed under a Creative Commons Attribution 4.0 International License .

Keith-Khadar/Gh05t
This project aims to design and develop a wearable EEG headset with an integrated data acquisition system. Using OpenBCI Ultracortex Mark IV as a template, the headset is designed to map the electrodes according to the…



Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS




JWehle/gps-seven-seg-clock
A large seven segment clock that uses highly accurate GPS time.

xmyoot/esp32c6-ble-sensor-coin-cell
Ultra-compact 4-layer circular BLE sensor pod with ESP32-C6, CR2032 coin-cell power and environmental sensors

Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
