Open-source KiCad boards

3,904 match “SWD”

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

2 layers39.8 × 13.1 mm
SOICbite SWD
SimonMerrett/SOICbite
A compact PCB footprint which allows SOIC test clips to be used as a space-efficient programming and debugging connector
4 parts363BSD-2-Clause
2 layers91.2 × 48.3 mm
JTAG SWD adapter
Neofoxx/JTAG-SWD-adapter
Universal JTAG/SWD/UART adapter based on FT2232H
103 parts36
2 layers52 × 50 mm
Wchlinke swd adapter checker
74th/ch32v-dev-boards

59 parts11MIT
6 layers30.5 × 18 mm
USB SWD
HarmonInstruments/JTAG_SWD
A USB to JTAG and SWD adapter for use with OpenOCD
46 parts5GPL-3.0
2 layers12.7 × 22.2 mm
Swd blaster
steieio/swd-blaster
This design adapts the 10 pin 50 mil picth JTAG header pinout used by Arm to the 10 pin 100 mil pitch header pinout used by Altera for their Blasters. It works great with the Tigard board and openFPGALoader.
3 parts5CC0-1.0
2 layers41.7 × 68.6 mm
Mri swd
adamgreen/mri-swd
Work In Progress! - MRI-SWD - GDB compatible hardware probe which allows debugging of Cortex-M based microcontrollers over SWD.
8 parts1Apache-2.0
2 layers19.1 × 15.2 mm
Skedd swd adapter
blakesmith/skedd_adapter
A SKEDD JTAG / SWD Adapter Board
4 parts1
2 layers40.6 × 50.3 mm
A0004-SWD Adapter
cacost12/SDR-SWD-Adapter-PCB

13 parts1
2 layers12.7 × 28.2 mm
JLink 6Pin SWD Adaptor
cracked-machine/JLink_6Pin_SWD_Adaptor

2 parts1
2 layers34.3 × 31.8 mm
Petit swd
db-electronics/petit-swd-kicad
This documentation describes Open Hardware and is licensed under the CERN OHL v. 1.2.
11 parts1
4 layers51.8 × 45.1 mm
Spark rp2040-swd probe
emb3rcia/spark-rp2040-swd-probe
Open-source financialy-accesible SWD probe.
72 parts1
2 layers45.3 × 22 mm
AAUSAT SWD via USIM adapter
nickoe/ngff_devboard
An attempt to make a M.2 module with a RF chip on it, for in in WWAN with M.2 B Key slots
7 parts1
2 layers31 × 57 mm
Pico dap swd
shufps/raspi-pico-dap
Small PCB for a Raspberry Pi Pico to 2x5 1.27mm pin socket.
2 parts1
2 layers32 × 30 mm
Swd tagconnect adapter
erikbuild/swd-tagconnect-adapter
Passive SWD adapter for Tag-Connect TC2030 and J-Link EDU Mini V2, designed in KiCad.
11 partsCERN-OHL-S-2.0
2 layers27.5 × 28 mm
Swd breakout
ezzatisawesome/swd-breakout

5 parts
2 layers50.8 × 22.9 mm
Swd featherwing
hearthsinger/swd-featherwing
Debugging featherwing for Adafruit feathers
15 partsGPL-3.0
2 layers22.9 × 17.8 mm
Huegi swd adapter
huegi/kicad-swd-adapter

3 partsMIT
2 layers12.9 × 12.8 mm
ARM SWD Breakout
Hugoyhu/ARM-Accessories
Designs for ARM Prototyping Assistance
4 parts
2 layers38.2 × 34.5 mm
Tc2030-swd adapter
joelsa/tc2030-jlink-adapter
Adapter to adapt TC2030 to a JLINK Interface.
15 parts
2 layers33 × 46.4 mm
Feather swd adapter
jtdc-ca/feather_swd_adapter
SWD Adapter with Breakout for Northern Mechatronics Feather Board (NM180310)
9 partsMIT
2 layers
SWD Adapter FT232H
Kev-J/ausbee-hardware
This repository contains some KiCAD schematics and PCB designs compliant with AUSBEE softwares. You will find the AUSBEE software here : https://github.com/Kev-J/ausbee
27 parts
2 layers30 × 50 mm
STLink SWD Adapter
McMaster-Rocketry-Team/STLink_SWD_Adapter

2 parts
2 layers26.6 × 11 mm
Pico debug swd adapter
mikeysklar/pi-debug-swd-adapter
Passive adapter: Raspberry Pi Debug Probe (JST-SH 3-pin) to standard 2x5 1.27mm ARM Cortex SWD header. Single-sided, home-etched.
2 partsGPL-3.0
2 layers30 × 12.8 mm
SWD Isolator
Neofoxx/SWD_Isolator
An isolator for SWD programming. Useful for UART, I2C and others as well
17 parts