

Petit swd
This documentation describes Open Hardware and is licensed under the CERN OHL v. 1.2.
- Size
- 34.3 × 31.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 11
- Nets
- 15
- Pads
- 47
- Tracks, vias
- 44, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 10 Apr 2024
- Updated
- 10 Apr 2024
Overview
Petit swd is an open-source printed circuit board by db-electronics, from the db-electronics/petit-swd-kicad repository on GitHub. It is a 2-layer board of 34.3 × 31.8 mm with 11 parts on 15 nets, routed with 44 tracks and 0 vias.
It is built around the AZ1117CH-3.3TRG1, 302-S201 and PPTC041LGBN-RC, with the USB-B1HSB6 among its other parts. Its parts include 6 connectors, 2 capacitors and 1 IC. It belongs with the interfaces and adapters boards of this library.
Main components
4AZ1117CH-3.3TRG1
SOT-223-20℃~+125℃@(Tj) 0.003%Vout 1 1.2V@(800mA) 1.35A 10V 3.3V 4mA 70dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) Regulators302-S201
插件,P=2.54mm插件,P=2.54mm Wire To Board Connector ROHSOn-Shore TechWire To Board ConnectorPPTC041LGBN-RC
弯插,P=2.54mm-40℃~+105℃ 1 2.54mm 2.54mm 250V 3A 4P Phosphor bronze Right Angle Square Hole Tin 弯插,P=2.54mm Female Headers ROHSSullins Connector SolutionsFemale HeadersUSB-B1HSB6
插件插件 USB Connectors ROHSOn-Shore TechUSB Connectors
README
README.mdPetit SWD
Petit SWD is an ARM JTAG adapter which reduces the 2x10 100mil connector to a 1x4 100mil connector better suited for SWD debugging. It also has a type B USB input to provide power to the target board from either VBUS 5V or 3.3V from an onboard voltage regulator. This is selectable via pin header.
Support Open Source
If you're going to use my free projects please consider sponsoring my work. Thanks!
Changelog
- v1.0
- initial release
Copyright and Disclaimer
Copyright: René Richard
This documentation describes Open Hardware and is licensed under the CERN OHL v. 1.2.
You may redistribute and modify this documentation under the terms of the CERN OHL v.1.2. (http://ohwr.org/cernohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN OHL v.1.2 for applicable conditions
Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10uF/25V | db-smt:0805 | C101, C102 |
| 1 | 302-S201 | db-thparts:HDR2X10-JTAG-SHROUD | CON101 |
| 1 | 61300211121 | db-thparts:HDR1X2 | CON106 |
| 1 | 61300311121 | db-thparts:HDR1X3 | CON105 |
| 1 | 61300411121 | db-thparts:HDR1X4 | CON102 |
| 1 | AZ1117CH-3.3TRG1 | db-smt:SOT-223 | U101 |
| 1 | PPTC041LGBN-RC | db-thparts:RCP1X4_RA | CON103 |
| 1 | USB-B1HSB6 | db-thparts:USB-B1HSxx | CON104 |
| 1 | db-logo | db-artwork:db-logo_10mm | logo101 |
| 1 | oshw-logo | db-artwork:oshw-logo_7.5mm | logo102 |
Similar boards
- 2 layers59.5 × 80.5 mm

- 2 layers130.8 × 83.8 mm

- 2 layers28.6 × 34.5 mm

Petit jtag
db-electronics/petit-jtag-kicad
This documentation describes Open Hardware and is licensed under the CERN OHL v. 1.2.
11 parts1 - 2 layers147.3 × 83.8 mm

- 2 layers28.4 × 36 mm

- 2 layers40 × 87.2 mm

Connector breakout
oresat/oresat-solar-simulator-hardware
Solar simulator for our 1U solar panels
10 parts7CERN-OHL-S-2.0 - 2 layers162.2 × 134.6 mm

- 2 layers68.8 × 59 mm

Pico rgbi to vga
barbeque/pico-rgbi-to-vga
Conversion of digital RGB + I video output (e.g. PC-6001) to VGA, using a Raspberry Pi Pico
25 parts4
Questions
How big is the Petit swd PCB?
It measures 34.3 × 31.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Petit swd use?
11 parts, built around the AZ1117CH-3.3TRG1, 302-S201, PPTC041LGBN-RC and USB-B1HSB6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Petit swd KiCad files?
From the db-electronics/petit-swd-kicad repository on GitHub, at the commit this page was made from: the board is petit-swd/petit-swd.kicad_pcb and its schematic petit-swd/petit-swd.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Petit swd design in my own project?
Its repository states no licence, so its author keeps all rights: ask db-electronics before reusing the design.