

Petit jtag
This documentation describes Open Hardware and is licensed under the CERN OHL v. 1.2.
- Size
- 28.6 × 34.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 11
- Nets
- 16
- Pads
- 45
- Tracks, vias
- 63, 2
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 28 Dec 2023
- Updated
- 10 Apr 2024
Overview
Petit jtag is an open-source printed circuit board by db-electronics, from the db-electronics/petit-jtag-kicad repository on GitHub. It is a 2-layer board of 28.6 × 34.5 mm with 11 parts on 16 nets, routed with 63 tracks and 2 vias.
It is built around the AZ1117CH-3.3TRG1, 2PH1-06-UA and 302-S101, with the USB-B1HSB6 among its other parts. Its parts include 6 connectors, 2 capacitors and 1 IC. It belongs with the interfaces and adapters boards of this library.
Main components
4AZ1117CH-3.3TRG1
SOT-223-20℃~+125℃@(Tj) 0.003%Vout 1 1.2V@(800mA) 1.35A 10V 3.3V 4mA 70dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) Regulators2PH1-06-UA
插件,P=2mmPin HeadersADAM TECH302-S101
插件Wire To Board ConnectorOn-Shore TechUSB-B1HSB6
插件插件 USB Connectors ROHSOn-Shore TechUSB Connectors
README
README.mdPetit JTAG
Petit JTAG is a USB Blaster adapter which reduces the 2x5 100mil connector to a 1x6 2mm connector when space is constrained on the target PCB. It also has a type B USB input to provide power to the target board from either VBUS 5V or 3.3V from an onboard voltage regulator. This is selectable via pin header.
Support Open Source
If you're going to use my free projects please consider sponsoring my work. Thanks!
Changelog
- v1.1
- change 2x3 50mil to a 1x6 2mm staggered footprint for more consistent connection to target board
- v1.0
- initial release
Copyright and Disclaimer
Copyright: René Richard
This documentation describes Open Hardware and is licensed under the CERN OHL v. 1.2.
You may redistribute and modify this documentation under the terms of the CERN OHL v.1.2. (http://ohwr.org/cernohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN OHL v.1.2 for applicable conditions
Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10uF | db-smt:0805 | C101, C102 |
| 1 | 2PH1-06-UA | db-thparts:HDR1X6_2MM | CON101 |
| 1 | 302-S101 | db-thparts:HDR2X5-JTAG_SHROUD | CON103 |
| 1 | 61300211121 | db-thparts:HDR1X2 | CON105 |
| 1 | 61300311121 | db-thparts:HDR1X3 | CON104 |
| 1 | 61301021121 | db-thparts:HDR2X5-JTAG | CON106 |
| 1 | AZ1117CH-3.3TRG1 | db-smt:SOT-223 | U101 |
| 1 | USB-B1HSB6 | db-thparts:USB-B1HSxx | CON102 |
| 1 | logo | db-artwork:db-logo_7.5mm | logo101 |
| 1 | logo | db-artwork:oshw-logo_5mm | logo102 |
Similar boards
- 2 layers130.8 × 83.8 mm

- 2 layers34.3 × 31.8 mm

Petit swd
db-electronics/petit-swd-kicad
This documentation describes Open Hardware and is licensed under the CERN OHL v. 1.2.
11 parts1 - 2 layers147.3 × 83.8 mm

- 2 layers162.2 × 134.6 mm

- 2 layers68.8 × 59 mm

Pico rgbi to vga
barbeque/pico-rgbi-to-vga
Conversion of digital RGB + I video output (e.g. PC-6001) to VGA, using a Raspberry Pi Pico
25 parts4 - 2 layers80 × 71 mm

Upd78214-breakout
barbeque/upd78214-breakout
Breakout board for debugging the NEC µPD78214GC microcontroller
34 parts1 - 2 layers70 × 57 mm

Dual input load share controller
abyrne55/dual-input-load-share-controller
KiCAD schematics for a "12VDC Dual-Input Load Share Controller with USB Monitoring" PCB
46 partsUnlicense - 2 layers75 × 55 mm

Questions
How big is the Petit jtag PCB?
It measures 28.6 × 34.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Petit jtag use?
11 parts, built around the AZ1117CH-3.3TRG1, 2PH1-06-UA, 302-S101 and USB-B1HSB6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Petit jtag KiCad files?
From the db-electronics/petit-jtag-kicad repository on GitHub, at the commit this page was made from: the board is petit-jtag/petit-jtag.kicad_pcb and its schematic petit-jtag/petit-jtag.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Petit jtag design in my own project?
Its repository states no licence, so its author keeps all rights: ask db-electronics before reusing the design.