
Upd78214-arduino mega hat
barbeque/upd78214-breakout
Breakout board for debugging the NEC µPD78214GC microcontroller

Breakout board for debugging the NEC µPD78214GC microcontroller
Upd78214-breakout is an open-source printed circuit board by barbeque, from the barbeque/upd78214-breakout repository on GitHub. It is a 2-layer board of 80 × 71 mm with 34 parts on 64 nets, routed with 424 tracks and 98 vias.
It is built around the USB-B1HSB6. Its parts include 21 resistors, 1 IC, 1 diode, 1 connector and 1 crystal. It belongs with the interfaces and adapters boards of this library.
This is an in-progress project. None of it is likely to work.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 10kΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R5, R6, R7, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21 +2 |
| 2 | R_Small_US | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 2 | TestPoint | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | TP1, TP2 |
| 1 | +12V | TestPoint:TestPoint_Bridge_Pitch5.08mm_Drill0.7mm | TP3 |
| 1 | 1kΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | Conn_02x17_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x17_P2.54mm_Vertical | J1 |
| 1 | DIP-14_W7.62mm_LongPads | Package_DIP:DIP-14_W7.62mm_LongPads | SPARE |
| 1 | GND | TestPoint:TestPoint_Bridge_Pitch5.08mm_Drill0.7mm | TP4 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | USB-B1HSB6 | USB-B1HSB6:OST_USB-B1HSB6 | X1 |
| 1 | upd78214-64p-qfp | NEC:QFP-64_14x14_Pitch0.8mm | U1 |
The 30 most common of 34 parts.

barbeque/upd78214-breakout
Breakout board for debugging the NEC µPD78214GC microcontroller



barbeque/pico-rgbi-to-vga
Conversion of digital RGB + I video output (e.g. PC-6001) to VGA, using a Raspberry Pi Pico

db-electronics/petit-jtag-kicad
This documentation describes Open Hardware and is licensed under the CERN OHL v. 1.2.

db-electronics/petit-swd-kicad
This documentation describes Open Hardware and is licensed under the CERN OHL v. 1.2.


abyrne55/dual-input-load-share-controller
KiCAD schematics for a "12VDC Dual-Input Load Share Controller with USB Monitoring" PCB

It measures 80 × 71 mm and has 2 copper layers, 1.6 mm thick.
34 parts, built around the USB-B1HSB6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the barbeque/upd78214-breakout repository on GitHub, at the commit this page was made from: the board is upd78214-breakout.kicad_pcb and its schematic upd78214-arduino-mega-hat/upd78214-arduino-mega-hat.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask barbeque before reusing the design.