Skip to the content

Open-source KiCad boards

107,410 boards

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

  • 2 layers56.2 × 30.2 mmRegulated SEPIC converter, the printed circuit board in 3D

    Regulated SEPIC converter

    tony-corsten/regulated-SEPIC-converter

    A regulated SEPIC converter based on the dual-rail switching supply, the ADP5071, with optional high PSRR low-noise LDOs (LT3094 and LT3042) on the output.

    42 parts6
  • 2 layers225 × 63.5 mmGnss-7-seg clock, the printed circuit board in 3D

    Gnss-7-seg clock

    Tosainu/gnss-7-seg-clock

    GNSS-powered, seven-segment table clock

    90 parts6MIT
  • 2 layers60 × 60 mmMoka, the printed circuit board in 3D

    Moka

    troisiemetype/mokaboard

    This is a board using RGB leds and soft pad buttons. It's inspired by Monome and Trellis from Adafruit.

    69 parts6
  • 2 layers173 × 111.3 mmSplittoDogu, the printed circuit board in 3D

    SplittoDogu

    tstrube/SplittoDogu

    Split Ergo Keyboard with Encoders and OLED screens running QMK

    57 parts6
  • 2 layers34 × 25 mmReference board, the printed circuit board in 3D

    Reference board

    TU-Darmstadt-APQ/Voltage_reference

    LM399/ADR1399 based 10 V/15 V sub-ppm stable reference

    21 parts6CERN-OHL-W-2.0
  • 4 layers78 × 46.3 mmChrisPCB, the printed circuit board in 3D

    ChrisPCB

    TUDA-MUST/ChrisBox

    4 Channel Charge Amplifier PCB

    197 parts6
  • 2 layers20.3 × 50.9 mmMIDI OUT, the printed circuit board in 3D

    MIDI OUT

    TuDo-Makerspace/MIDI-Breakouts

    Just another pair of MIDI breakouts

    15 parts6
  • 4 layers25.4 × 25.4 mmInt bluetooth, the printed circuit board in 3D

    Int bluetooth

    TUDSSL/FreeBie

    To compile FreeBie runtime we used the GNU Arm Embedded Toolchain (9.3.1) and CMake (3.19.1) to build the project. To program the MCU we used the J-Link debug probe with the accompanying J-Link software.

    85 parts6MIT
  • 4 layers94 × 38 mmLicheedmi, the printed circuit board in 3D

    Licheedmi

    Tuetuopay/hdmizness

    A business card that runs Linux, with a HDMI output

    76 parts6
  • 2 layers44 × 49 mmTrack, the printed circuit board in 3D

    Track

    tufourn/cirque_breakout

    Breakout board for the 40mm cirque trackpad

    2 parts6
  • 2 layers70.8 × 22.5 mmNearness intellijel-1u, the printed circuit board in 3D

    Nearness intellijel-1u

    TurpinL/nearness-intellijel-1u

    Intellijel 1u adaptation of nearness, the minimal panning mixer for Eurorack

    48 parts6
  • 4 layers280 × 200 mmMain Control Unit, the printed circuit board in 3D

    Main Control Unit

    Tuskar-Marine/hardware

    All tools for the Mermaid's Rest open sailing tools

    409 parts6
  • 2 layers93.5 × 149.9 mmHackPackv4, the printed circuit board in 3D

    HackPackv4

    twilio/hackpack-v4-hardware

    Hardware collateral for the Twilio 2018 SIGNAL conference badge.

    44 parts6
  • 2 layers49 × 21 mmTympan BTE RIGID Array, the printed circuit board in 3D

    Tympan BTE RIGID Array

    Tympan/Earpiece_BTE-RIC_V1

    Earpiece that fits behind the ear (BTE) with a Receiver in Canal (RIC)

    25 parts6
  • 4 layers70 × 99.9 mmMicromouse, the printed circuit board in 3D

    Micromouse

    UBIEEE/FrankenMouse

    FrankenMouse is a MicroMouse robot that was designed, built, and programmed from scratch by members of the University at Buffalo's IEEE Student Branch.

    100 parts6MIT
  • 4 layers120 × 100 mmIO LINK, the printed circuit board in 3D

    IO LINK

    ucandevices/IO-LINK-Covnerter

    172 parts6MIT
  • 2 layers65 × 70 mmViBravo September 2024, the printed circuit board in 3D

    ViBravo September 2024

    udellc/Vibrosonics

    Documentation (Doxygen) \ Hardware: Adafruit ESP32 Feather, MAX9744 Amplifier board, TT25-8 puck transducer, 3.5mm audio jack cable \ Dependencies: AudioLab · AudioPrism · Fast4ier

    54 parts6GPL-3.0
  • 2 layers99.1 × 50.8 mmVideoTrigger, the printed circuit board in 3D

    VideoTrigger

    ukmaker/VideoTrigger

    My oscilloscope wouldn't trigger relibly on video signals, so I made this to help me work on my VDPtoTFT project.

    40 parts6Apache-2.0
  • 2 layers77.5 × 70.5 mmPower Regulator PCB (LT8608), the printed circuit board in 3D

    Power Regulator PCB (LT8608)

    UofA-BAJA/2024-2025-Firmware

    The software behind the electrical system in Baja Wildcat Racing.

    38 parts6
  • 4 layers115 × 55 mmRoamr motors, the printed circuit board in 3D

    Roamr motors

    uw-roamr/roamr

    turn your phone into a robot running SLAM with two motors, two control boards, and a bluetooth chip

    110 parts6
  • 2 layers53 × 20 mm20250807 updi, the printed circuit board in 3D

    20250807 updi

    uwezi/AVR-Dx

    some general stuff about the AVR-DA and AVR-DB series

    29 parts6MIT
  • 2 layersVoltera Test 1, the printed circuit board in 3D

    Voltera Test 1

    uwnrg/chip

    This is the controls side of the CHIP project. This includes the firmware as well as any interface software. The Marlin firmware can be found at https://github.com/MarlinFirmware/Marlin.

    7 parts6
  • 2 layers17.8 × 33 mmComet, the printed circuit board in 3D

    Comet

    vattern/comet

    Comet USB C pro-micro drop in

    25 parts6
  • 2 layers86 × 50 mmMicro Breakout+RGB, the printed circuit board in 3D

    Micro Breakout+RGB

    veroxzik/bemani-arduino-boards

    A collection of Arduino breakout boards and code for Bemani uses.

    37 parts6GPL-3.0