

This is a board using RGB leds and soft pad buttons. It's inspired by Monome and Trellis from Adafruit.
- Size
- 60 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 69
- Nets
- 44
- Pads
- 917
- Tracks, vias
- 849, 185
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 23 Jun 2017
- Updated
- 12 Jan 2018
Overview
Moka is an open-source printed circuit board by troisiemetype, from the troisiemetype/mokaboard repository on GitHub. It is a 2-layer board of 60 × 60 mm with 69 parts on 44 nets, routed with 849 tracks and 185 vias.
It is built around the ATMEGA328P-AU and SK6812MINI-E. Its parts include 17 diodes, 16 switches, 10 connectors, 5 capacitors and 3 resistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)SK6812MINI-E
SMD-40℃~+85℃ 0.6mA 1.78mm 120mcd~240mcd 120° 160mcd~320mcd 1kHz 2.8mm 2000V 3.2mm 3.7V~5.5V 460nm~470nm 515nm~525nm 620nm~625nm 800Kbit/s 815mcd~1275mcd Semi-transparent lens SMD RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)
README
readme.mdThis is a board using RGB leds and soft pad buttons. It's inspired by Monome and Trellis from Adafruit.
This work is published under the terms of the GNU GPL v3 licence.
Parts
69| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | SK6812_MINI | Display_perso:SK6812-mini | D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16, D17 |
| 16 | SW_Push | switches_perso:Pad_30 | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12, SW13, SW14, SW15, SW16 |
| 8 | Centering_2,8 | Mounting_Holes:MountingHole_2.7mm_M2.5 | Mount5, Mount6, Mount7, Mount8, Mount9, Mount10, Mount11, Mount12 |
| 5 | 100n | Capacitors_SMD:C_0603 | C1, C2, C3, C4, C5 |
| 5 | GS2 | Connectors:GS2 | J2, J3, J4, J5, J6 |
| 4 | CONN_01X05 | Connectors_perso:Connecteur_1x5_SMD | J7, J8, J9, J10 |
| 4 | Mounting_2,2 | Mounting_Holes:MountingHole_2.2mm_M2 | Mount1, Mount2, Mount3, Mount4 |
| 3 | 10K | Resistors_SMD:R_0603 | R1, R2, R3 |
| 3 | Fiducial | Fiducials:Fiducial_1mm_Dia_2.54mm_Outer_CopperTop | FID1, FID2, FID3 |
| 1 | ATMEGA328P-AU | Housings_QFP:TQFP-32_7x7mm_Pitch0.8mm | U1 |
| 1 | Conn_02x03_Odd_Even | Connectors_perso:Pin_Header_Straight_2x03_Pitch2.54mm_SMD | J1 |
| 1 | D | Diodes_SMD:D_SOD-123 | D1 |
| 1 | Moka | logos:Moka_25mm | logo1 |
| 1 | le labo | logos:Le_labo_20mm | logo2 |
Similar boards
- 2 layers169.9 × 190.9 mm

- 2 layers27.5 × 40.3 mm

- 2 layers80 × 110 mm

NucDeck Left Controller PCB
dmcke5/NucDeck
The Open Source DIY Handheld Gaming PC!
59 parts561CERN-OHL-S-2.0 - 2 layers50.5 × 128.5 mm

- 2 layers152 × 88 mm

RFBitBangSMT
profdc9/RFBitBanger
A QRP digital transceiver created from readily available parts for off-the-grid maintenance
271 parts222 - 2 layers50.2 × 31.2 mm

MCU Datalogger
futureshocked/KLP4e_MCU-Datalogger
This is the repository for the "MCU Datalogger" project.
31 parts138MIT - 2 layers34 × 46 mm

- 2 layers73 × 94 mm

Sportiduino base
sportiduino/sportiduino
Electronic timing system for orienteering and similar outdoor sports events on Arduino
119 parts78GPL-3.0
Questions
How big is the Moka PCB?
It measures 60 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Moka use?
69 parts, built around the ATMEGA328P-AU and SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Moka KiCad files?
From the troisiemetype/mokaboard repository on GitHub, at the commit this page was made from: the board is Moka.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Moka design in my own project?
Its repository states no licence, so its author keeps all rights: ask troisiemetype before reusing the design.