

Licheedmi
A business card that runs Linux, with a HDMI output
- Size
- 94 × 38 mm
- Copper layers
- 4
- Thickness
- 0.8 mm
- Parts
- 76
- Nets
- 143
- Pads
- 478
- Tracks, vias
- 1,914, 188
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 29 May 2020
- Updated
- 10 Jul 2025
Overview
Licheedmi is an open-source printed circuit board by Tuetuopay, from the Tuetuopay/hdmizness repository on GitHub. It is a 4-layer board of 94 × 38 mm with 76 parts on 143 nets, routed with 1,914 tracks and 188 vias.
It is built around the CH340C, SII9022ACNU and TS3DV20812RHH. Its parts include 23 resistors, 17 capacitors, 6 diodes, 5 ICs and 5 connectors. It belongs with the computers and single-board computers and interfaces and adapters boards of this library.
Main components
3CH340C
SOP-16-20℃~+70℃ 2Mbps 3.3V、5V 50uA 7mA Transceiver USB 2.0 SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersSII9022ACNU
QFN-72-EP(10x10)-20℃~+85℃ 1.62V~1.98V、3V~3.6V 1.65Gbps I2C Transmitter QFN-72-EP(10x10) Video Interface ICs ROHSLatticeVideo Interface ICsTS3DV20812RHH
VQFN-36-EP(6x6)-40℃~+85℃ 1.1GHz 149ps 2.25V~3.6V 2:1 5ns 6ns 6Ω 8 8pF VQFN-36-EP(6x6) Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, Multiplexers
README
README.mdhdmizness
A business card that runs Linux and that has an HDMI output (and yes, it runs DOOM).
Did I give you one? Congratulations! Head off to usage if you want to read a bit before trying it out.
Project layout
.
+- documentation - docs for various chips and boards used
+- graphics - various graphic files used for the hardware design
+- hardware - home of the hardware design files
| `- licheedmi - PoC board that leverages a Lichee Pi Nano to test the concept
| of a pcb-only hdmi female connector
`- software - everything related to the software running on those boardsParts
76| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R2, R5, R6, R7, R8, R9, R10, R11, R12, R14, R15, R19, R20, R23, R24 |
| 12 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C3, C4, C5, C6, C7, C11, C12, C13, C15, C16, C17 |
| 6 | RED | LED_SMD:LED_0603_1608Metric | D1, D2, D3, D4, D5, D6 |
| 5 | 1u | Capacitor_SMD:C_0603_1608Metric | C2, C8, C9, C10, C14 |
| 3 | 600@100M | Inductor_SMD:L_0603_1608Metric | FB1, FB2, FB3 |
| 3 | HPD | TestPoint:TestPoint_Pad_D1.0mm | TP4, TP8, TP9 |
| 3 | SCL | TestPoint:TestPoint_Pad_D1.0mm | TP2, TP6, TP10 |
| 3 | SDA | TestPoint:TestPoint_Pad_D1.0mm | TP3, TP7, TP11 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R13 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric | R21, R22 |
| 2 | CEC | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP5 |
| 1 | +1V2 | TestPoint:TestPoint_Pad_D1.0mm | TP13 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric | R18 |
| 1 | 4k3 | Resistor_SMD:R_0603_1608Metric | R16 |
| 1 | AVCC12 | TestPoint:TestPoint_Pad_D1.0mm | TP15 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U5 |
| 1 | CVCC12 | TestPoint:TestPoint_Pad_D1.0mm | TP12 |
| 1 | Conn_01x09 | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J1 |
| 1 | DNP | Resistor_SMD:R_0603_1608Metric | R17 |
| 1 | HDMI_A | hdmizness:Boomelec_HDMI-001 | J4 |
| 1 | HDMI_A_PCB | hdmizness:HDMI_A_PCB | J2 |
| 1 | IOVCC | TestPoint:TestPoint_Pad_D1.0mm | TP14 |
| 1 | LicheeNano | hdmizness:LicheeNano | U2 |
| 1 | LicheePiNano_LCD | hdmizness:Hirose_FH12-40S-0.5SH_1x40-1MP_P0.50mm_Horizontal | J3 |
| 1 | SiI9022A | hdmizness:QFN-72-1EP_10x10mm_P0.5mm_EP4.7x4.7mm_ThermalVias | U1 |
| 1 | TLV74312PDBVR | Package_TO_SOT_SMD:TSOT-23-5 | U4 |
| 1 | TS3DV20812 | Package_DFN_QFN:QFN-36-1EP_6x6mm_P0.5mm_EP4.1x4.1mm | U3 |
| 1 | USB_C_Receptacle_USB2.0 | hdmizness:USB_C_Receptacle_Palconn_UTC16-G | J5 |
The 74 most common of 76 parts.
More from Tuetuopay/hdmizness
1- 2 layers85.6 × 54 mm

Similar boards
- 4 layers50 × 100 mm

BeamBender
jbilander/BeamBender
An open source flicker fixer PCB for Amiga 1200 and 500
104 parts25CC-BY-SA-4.0 - 4 layers157.5 × 98 mm

BeamBender BigBox
kavanoz64/BeamBender-BigBox
An AGA digital scandoubler and HDMI output card for the Amiga 4000, with Amiga 2000 / 3000 support.
221 parts12 - 8 layers68 × 67.8 mm

Reform kintex
kitspace-forks/reform-kintex-som
This is the open hardware system-on-module featuring the Xilinx/AMD Kintex-7 FPGA (XC7K160T or XC7K325T) and 2GB DDR3 RAM.
297 parts2 - 4 layers183.4 × 143.1 mm

- 4 layers45 × 35 mm

- 4 layers91 × 53.1 mm

Nff pcb
o7-machinehum/flipper-blackhat
Linux based WiFi pentesting device for the Flipper Zero.
184 parts300 - 2 layers66.8 × 34 mm

- 2 layers13.7 × 21.4 mm

Questions
How big is the Licheedmi PCB?
It measures 94 × 38 mm and has 4 copper layers, 0.8 mm thick.
What parts does the Licheedmi use?
76 parts, built around the CH340C, SII9022ACNU and TS3DV20812RHH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Licheedmi KiCad files?
From the Tuetuopay/hdmizness repository on GitHub, at the commit this page was made from: the board is hardware/licheedmi/licheedmi.kicad_pcb and its schematic hardware/hdmizness-v1/hdmizness.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Licheedmi design in my own project?
Its repository states no licence, so its author keeps all rights: ask Tuetuopay before reusing the design.