Skip to the content

Open-source KiCad boards

107,410 boards

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

  • 4 layers25.4 × 42.9 mmTESEO LIV3F uBUS, the printed circuit board in 3D

    TESEO LIV3F uBUS

    mkmielke/LIV3F_mikroBUS

    The KiCAD project files for a mikroBUS add-on board featuring the Teseo-LIV3F GNSS module.

    35 parts6
  • 2 layers50.3 × 40.1 mmVLFANT01B, the printed circuit board in 3D

    VLFANT01B

    mlab-modules/VLFANT01

    VLF antenna connection module

    9 parts6
  • 2 layers127.8 × 100 mmAmoebaPanel, the printed circuit board in 3D

    AmoebaPanel

    mmccoyd/hillside_amoeba_choc14

    A narrow single switch Amoeba PCB for Dactyl keyboards with choc spacing

    212 parts6CERN-OHL-W-2.0
  • 2 layers68.6 × 53.3 mmControl chain arduino shield, the printed circuit board in 3D

    Control chain arduino shield

    mod-audio/cc-hw-arduino-shield

    MOD Arduino Shield hardware repository.

    41 parts6CC-BY-SA-4.0
  • 4 layers194 × 94 mmBottom board, the printed circuit board in 3D

    Bottom board

    mod-audio/hw-mod-dwarf

    Hardware project of MOD Dwarf

    319 parts6
  • 2 layers414.3 × 119.1 mmOsborne1-KeyboardReplacement, the printed circuit board in 3D

    Osborne1-KeyboardReplacement

    monotech/Osborne1-KeyboardReplacement

    Replacement keyboard using Cherry MX switches, for if your Osborne 1 keyboard had a bad membrane like mine.

    78 parts6GPL-3.0
  • 2 layers35 × 18 mmXA1541, the printed circuit board in 3D

    XA1541

    monotech/XA1541-PCB-for-DB25-Backshell

    XA1541 Commodore drive/machine to PC parallel port converter cable. PCB for DB25 backshell

    10 parts6
  • 2 layers100.4 × 96 mmXt cf, the printed circuit board in 3D

    Xt cf

    monotech/XT-CF-RA

    Rear-accessible XT-CF Bootable 8-bit ISA CompactFlash - no bracket machining required

    34 parts6GPL-3.0
  • 4 layers80 × 80 mmPICO RS485, the printed circuit board in 3D

    PICO RS485

    mortens-lab/PICO_RS485

    Raspberry Pi Pico with RS485 interface and sensors

    61 parts6
  • 2 layers50.8 × 41.9 mmDiscrete 741, the printed circuit board in 3D

    Discrete 741

    mostlydiyrf/OA741D

    43 parts6
  • 2 layers102.4 × 102.4 mmGenerator 5351 rect sine, the printed circuit board in 3D

    Generator 5351 rect sine

    MR-DOS/generator_5351_rect_sine

    Rectangular and sine generator with Si5351 working up to 200 MHz

    284 parts6GPL-3.0
  • 2 layers37.8 × 24.4 mmEsp01-ws2812b breakout, the printed circuit board in 3D

    Esp01-ws2812b breakout

    MrAJB/ESP01-WS2812B

    Development of a small ESP01 breakout board to support controlling two WS2812B LED strips and a Dallas DS18B20 temperature sensor, used for integration with HomeAssistant through ESPHome.

    20 parts6MIT
  • 2 layers67.6 × 45.3 mmEvalboard1, the printed circuit board in 3D

    Evalboard1

    mschuldt/ga144-breakout

    Simple evaluation boards for the GA144 multi-computer chip

    37 parts6
  • 4 layers140 × 140 mmFpgaboard, the printed circuit board in 3D

    Fpgaboard

    msinger/gbreveng

    Stuff for Gameboy reverse engineering and some documentation

    342 parts6
  • 2 layers101.6 × 65.3 mmMsx eprom cartridge 3.1, the printed circuit board in 3D

    Msx eprom cartridge 3.1

    msx-solis/MSX-EEPROM-Cartridge-64k-v3

    Simple MSX ROM cartridge up to 64k

    10 parts6
  • 2 layers100 × 100 mmRio octobot, the printed circuit board in 3D

    Rio octobot

    multigcs/rio-octobot

    8Axis LinuxCNC-RIO main-board - for the iceWerx iCE40-HX8K FPGA-Devboard - kicad project

    123 parts6
  • 2 layers49.5 × 49.5 mmRobot, the printed circuit board in 3D

    Robot

    MultipedRobotics/quadruped-AX12

    25 parts6MIT
  • 4 layers155 × 103 mmMEMLNaut 0 3, the printed circuit board in 3D

    MEMLNaut 0 3

    MusicallyEmbodiedML/MEMLNaut

    138 parts6
  • 2 layers54.5 × 77.5 mmEmbedded pcb, the printed circuit board in 3D

    Embedded pcb

    mvx-dev/morphing-airfoil

    UNSW DESN1000 morphing airfoil project

    32 parts6
  • 4 layers47.7 × 51.3 mmPCIe x8 Breakout, the printed circuit board in 3D

    PCIe x8 Breakout

    mwrnd/PCIe_x8_Breakout

    PCIe x8 Signal Breakout to U.FL/UMCC Connectors

    42 parts6BSD-2-Clause
  • 4 layers70 × 47.5 mmQSFP Breakout, the printed circuit board in 3D

    QSFP Breakout

    mwrnd/QSFP_Breakout

    QSFP Breakout to U.FL/UMCC

    54 parts6BSD-2-Clause
  • 2 layers200 × 100 mmAmp600w, the printed circuit board in 3D

    Amp600w

    mx-yah/amp600w

    A high-performance high-power class-D amplifier that enables true premium sound quality with high-efficiency class-D technology

    133 parts6
  • 2 layers47.3 × 23.4 mmStlink, the printed circuit board in 3D

    Stlink

    myowndevice/stlink

    Схемы и прошивка к прибору ST Link

    50 parts6