

Pssst IF module
- Size
- 101.6 × 30.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 60
- Nets
- 29
- Pads
- 136
- Tracks, vias
- 168, 126
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 3 Feb 2024
- Updated
- 5 Jan 2026
Overview
Pssst IF module is an open-source printed circuit board by mostlydiyrf, from the mostlydiyrf/p3st repository on GitHub. It is a 2-layer board of 101.6 × 30.6 mm with 60 parts on 29 nets, routed with 168 tracks and 126 vias.
Its parts include 26 capacitors, 10 resistors, 10 crystals, 7 connectors and 4 inductors.
README
README.mdP3ST SSB Transceiver
This repository is for design files, Arduino firmware, and assembly instructions.
Parts
60| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | Crystal | Crystal:Crystal_HC49-U_Vertical | Y1, Y2, Y3, Y4, Y5, Y6, Y7, Y8, Y9, Y10 |
| 7 | C | Capacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mm | C13, C14, C15, C16, C17, C18, C19 |
| 7 | C | K7TFC_Passives:Cap_ParallelPads_Righthand_P2.50mm | C12, C21, C22, C23, C24, C25, C26 |
| 5 | 0.10 | Capacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mm | C4, C5, C6, C7, C8 |
| 5 | 0.1uF | Capacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mm | C1, C2, C3, C9, C20 |
| 3 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J2, J3 |
| 2 | 10 | K7TFC_Passives:R_Axial_P2.54mm_Vertical | R5, R11 |
| 2 | 1K | K7TFC_Passives:R_Axial_P2.54mm_Vertical | R4, R7 |
| 2 | 2N2222A_TO18 | Package_TO_SOT_THT:TO-18-3 | Q1, Q2 |
| 2 | 3K | K7TFC_Passives:R_Axial_P2.54mm_Vertical | R3, R9 |
| 2 | 680 | K7TFC_Passives:R_Axial_P2.54mm_Vertical | R2, R8 |
| 2 | 9.5uH | Inductor_THT:L_Axial_L11.0mm_D4.5mm_P7.62mm_Vertical_Fastron_MECC | L1, L4 |
| 2 | Conn_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J6, J7 |
| 2 | Conn_01x02 | K7TFC:SMA_EdgeMount_0.062_Samtec_wHoles | J4, J5 |
| 2 | L | K7TFC_Toroids:Toroid_T50_Vertical_P6.00mm | L2, L3 |
| 1 | 0.10uF | Capacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mm | C10 |
| 1 | 100 | K7TFC_Passives:R_Axial_P2.54mm_Vertical | R1 |
| 1 | 50 | K7TFC_Passives:R_Axial_P2.54mm_Vertical | R12 |
| 1 | C? | Capacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mm | C11 |
| 1 | LOGO | Graphics:diyrf_12mm | G*** |
More from mostlydiyrf/p3st
11- 2 layers189 × 152.7 mm

- 2 layers189 × 152.7 mm

- 2 layers101.6 × 30.6 mm

- 2 layers63.5 × 25.4 mm

- 2 layers63.5 × 25.4 mm

- 2 layers

- 2 layers

- 2 layers63.5 × 25.4 mm

- 2 layers63.5 × 25.4 mm

- 2 layers63.5 × 25.4 mm

- 2 layers

Similar boards
- 2 layers35 × 50 mm

- 2 layers32.9 × 119.1 mm

- 2 layers35.9 × 62.7 mm

Rp2040-memcard
sd2psx/pcb
The PCB must be produced in 0.8mm thickness. Production files are provided under the "Releases" tab. These do not include the through-hole OLED module.
60 parts241 - 2 layers58 × 110 mm

- 2 layers52 × 90 mm

- 2 layers42.5 × 80 mm

- 2 layers57.4 × 12 mm

- 2 layers87.9 × 123.9 mm

Bitdoglab
BitDogLab/BitDogLab
Open-source educational hardware for embedded systems, programming, electronics, and physical computing.
60 parts203
Questions
How big is the Pssst IF module PCB?
It measures 101.6 × 30.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pssst IF module use?
60 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pssst IF module KiCad files?
From the mostlydiyrf/p3st repository on GitHub, at the commit this page was made from: the board is kicad/Pssst_IF_module.kicad_pcb and its schematic kicad/P3ST_motherboard_rev.B.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pssst IF module design in my own project?
Its repository states no licence, so its author keeps all rights: ask mostlydiyrf before reusing the design.