2 layers
2 layers54.5 × 77.5 mm
Embedded pcb
mvx-dev/morphing-airfoil6UNSW DESN1000 morphing airfoil project
- Size
- 54.5 × 77.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 38
- Pads
- 112
- Tracks, vias
- 179, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 24 Feb 2025
- Updated
- 25 Apr 2025
Overview
Embedded pcb is an open-source printed circuit board by mvx-dev, from the mvx-dev/morphing-airfoil repository on GitHub. It is a 2-layer board of 54.5 × 77.5 mm with 32 parts on 38 nets, routed with 179 tracks and 0 vias.
It is built around the LM324 and LM1117T-3.3. Its parts include 10 resistors, 4 capacitors, 3 ICs, 3 switches and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2
LM324
SOP-14-1.5V~10V 0℃~+70℃ 24V 250nA 3V~20V 4 40mA 50nA 700uA 7mV 80dB SOP-14 Operational Amplifier ROHSHXY MOSFETOperational Amplifier
LM1117T-3.3
TO-220-3L-40℃~+125℃@(Tj) 0.003%Vout 1 1.25V@(1A) 10mA 15V 1A 3.3V 75dB@(120Hz) Fixed Over Current Protection、Thermal shutdown Positive TO-220-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSHGSEMIVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdDESN1K Morphing Wing Main Repository
The main repository for uploading project files for the morphing wing project.
Directories
Airfoils: any files relating to airfoil design. This include txt files, STL files, and Solidworks part files
Minutes: the minutes for every meeting
Embedded Systems: all files relating to embedded system design. This includes schematics, PCB files, etc
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R6, R7, R8 |
| 4 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4 |
| 3 | SW_SPDT | Connector_Wire:SolderWire-0.1sqmm_1x03_P3.6mm_D0.4mm_OD1mm | SW1, SW2, SW3 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | Rsen1, Rsen2 |
| 2 | 1k | Connector_Wire:SolderWire-0.1sqmm_1x03_P3.6mm_D0.4mm_OD1mm | RV1, RV2 |
| 2 | 47 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9, R10 |
| 2 | C | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C1, C2 |
| 2 | C_Polarized | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C3, C4 |
| 2 | LED | LED_THT:LED_D5.0mm | D1, D2 |
| 1 | Arduino_Nano_v2.x | Module:Arduino_Nano | A1 |
| 1 | LM1117T-3.3 | Package_TO_SOT_THT:TO-220-3_Vertical | U3 |
| 1 | LM324 | Package_DIP:DIP-14_W7.62mm | U1 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J2 |
| 1 | Servos | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J1 |
The 29 most common of 32 parts.
Similar boards
- 2 layers68.6 × 53.3 mm
- 2 layers
T41-Main+RF board V012
DRWJSCHMIDT/T41
This is the repository for the officially released V10, V11, and V12 versions of the T41 Software Defined Transceiver hardware and kits.
255 parts66 - 4 layers100 × 100 mm
- 2 layers99.9 × 99.9 mm
- 4 layers100 × 100 mm
- 4 layers98.5 × 82 mm
Pico2lvds
ceteras/PicoLVDS
Tested with B089AW01-V.0 and HSD089IFW1-A00-V1.0 on a breadboard. I'm sure it will work with other displays from old netbooks.
43 parts7GPL-3.0 - 2 layers
Questions
How big is the Embedded pcb PCB?
It measures 54.5 × 77.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Embedded pcb use?
32 parts, built around the LM324 and LM1117T-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Embedded pcb KiCad files?
From the mvx-dev/morphing-airfoil repository on GitHub, at the commit this page was made from: the board is Embedded Systems/embedded-pcb/embedded-pcb.kicad_pcb and its schematic Embedded Systems/embedded-pcb/embedded-pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Embedded pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask mvx-dev before reusing the design.