
BankedMemory
crankery/crank68
One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

8-bit ISA debug and POST card
Isa debug card is an open-source printed circuit board by maniekx86, from the maniekx86/isa_debug_post_card repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 99.9 × 99.9 mm with 85 parts on 174 nets, routed with 5,055 tracks and 662 vias.
It is built around the 74LS245SC, LM1117T-3.3 and ULN2803A, with the BC557 among its other parts. Its parts include 31 resistors, 11 diodes, 10 capacitors, 7 ICs and 6 transistors. It belongs with the FPGA and CPLD boards of this library.
ISA debug post card with additional features like data/address bus analyzer, frequency measure and multi I/O POST port selection. Uses a XC95144XL CPLD as main IC. Dedicated project page with manual and assembly instructions will be available soon.
It is also designed to have a 45-degree bevel at the connector. When ordering, enable edge connector and a 45-degree bevel. Ready gerbers are available in output folder
CPLD VHDL source code and compiled firmware for the CPLD are available here: https://github.com/maniekx86/isa_debug_post_card_cpld_source
Based on https://github.com/JayesonLS/ISA-Cards IsaTemplate
Special thanks to PCBWay for sponsoring this project! PCBWay is a well-known PCB prototyping and manufacturing service, providing high-quality boards and excellent customer support. I have worked with their boards in the past and can say that they are of great quality. I easily placed an order for PCBs on their platform for this project without any problems. The sponsorship also included a free quick delivery option. If you’re looking for reliable PCB prototyping and manufacturing services, I highly recommend checking them.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 23 | 1K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26 +7 |
| 8 | 100 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R3, R4, R7, R8, R9, R10 |
| 8 | 100n | Capacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | C2, C3, C5, C6, C7, C8, C9, C10 |
| 8 | SolderJumper | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1, JP3, JP4, JP5, JP6, JP7, JP9, JP10 |
| 6 | BC557 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2, Q3, Q4, Q5, Q6 |
| 2 | SW_DIP_x03 | Button_Switch_THT:SW_DIP_SPSTx03_Slide_9.78x9.8mm_W7.62mm_P2.54mm | SW1, SW2 |
| 2 | SolderJumper | Jumper:SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mm | JP2, JP8 |
| 2 | ~ | Library_footprints:LED_3_digit_0_56inch_12pin | U6, U7 |
| 1 | 10u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | 20MHz | Library_footprints:OSC_8_14_Multi | Y1 |
| 1 | 47u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C4 |
| 1 | 74LS244 | Package_DIP:DIP-20_W7.62mm | U5 |
| 1 | 74LS245 | Package_DIP:DIP-20_W7.62mm | U1 |
| 1 | Bus_ISA_8bit | Library_footprints:BUS_XT | J1 |
| 1 | Conn_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J3 |
| 1 | JTAG | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J2 |
| 1 | LED_12V | LED_THT:LED_D5.0mm | D9 |
| 1 | LED_5V | LED_THT:LED_D5.0mm | D8 |
| 1 | LED_CLK_ISA | LED_THT:LED_D5.0mm | D4 |
| 1 | LED_IO_R | LED_THT:LED_D5.0mm | D1 |
| 1 | LED_IO_W | LED_THT:LED_D5.0mm | D11 |
| 1 | LED_MEM_R | LED_THT:LED_D5.0mm | D7 |
| 1 | LED_MEM_W | LED_THT:LED_D5.0mm | D3 |
| 1 | LED_NEG_12V | LED_THT:LED_D5.0mm | D6 |
| 1 | LED_NEG_5V | LED_THT:LED_D5.0mm | D2 |
| 1 | LED_RDY | LED_THT:LED_D5.0mm | D10 |
| 1 | LED_RESET_ISA | LED_THT:LED_D5.0mm | D5 |
| 1 | LM1117T-3.3 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | U2 |
| 1 | LOGO | Library_footprints:graphics_pcbway | G*** |
| 1 | ULN2803A | Package_DIP:DIP-18_W7.62mm | U4 |
| 1 | XC95144XL-TQ100 | Package_QFP:TQFP-100_14x14mm_P0.5mm | U3 |
| 1 | clk_main | TestPoint:TestPoint_Pad_2.0x2.0mm | TP2 |
| 1 | isa_reset | TestPoint:TestPoint_Pad_2.0x2.0mm | TP1 |
| 1 | pow3.3V | TestPoint:TestPoint_Pad_2.0x2.0mm | TP3 |

crankery/crank68
One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.


DRWJSCHMIDT/T41
This is the repository for the officially released V10, V11, and V12 versions of the T41 Software Defined Transceiver hardware and kits.



ceteras/PicoLVDS
Tested with B089AW01-V.0 and HSD089IFW1-A00-V1.0 on a breadboard. I'm sure it will work with other displays from old netbooks.


It measures 99.9 × 99.9 mm and has 2 copper layers, 1.6 mm thick.
85 parts, built around the 74LS245SC, LM1117T-3.3, ULN2803A and BC557. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the maniekx86/isa_debug_post_card repository on GitHub, at the commit this page was made from: the board is isa_debug_card.kicad_pcb and its schematic isa_debug_card.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).