
Open-source KiCad boards
479 match “z80”Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.
- 2 layers99.9 × 99.9 mm

- 2 layers81.3 × 86.4 mm

- 2 layers170.2 × 100 mm

Z80-SBC
skiselev/zeta_sbc
Zeta SBC is an Zilog Z80 based single board computer. It is inspired by Ampro Little Board Z80 and N8VEM project. Zeta SBC is software compatible with RomWBW Firmware
75 parts53GPL-3.0 - 2 layers101.6 × 53.3 mm

- 2 layers31.5 × 75.7 mm

- 2 layers99.7 × 99.1 mm

C64 Z80 Module
tebl/C64-CPM-Cartridge
A recreation of the CP/M cartridge for the Commodore 64.
34 parts27 - 2 layers108 × 69.9 mm

- 2 layers42.5 × 90 mm

Z80 ssd
hharte/z80_ssd
This project implements a solid-state disk controller for the Z80. The board plugs into the Z80 CPU socket and the Z80 CPU plugs into the board.
22 parts11MIT - 2 layers100 × 65 mm

- 2 layers

- 2 layers101.6 × 53.3 mm

Z80-cpu mem
skiselev/Z80-CPM
RCBus Z80 CPU and Memory Module designed with discrete logic
32 parts5CERN-OHL-S-2.0 - 2 layers103.1 × 50 mm

- 2 layers100 × 75 mm

- 2 layers

- 2 layers

- 2 layers137 × 101.1 mm

Z80 board1
alexfreed58/z80-CPM-board-with-smart-i-o
This is yet another retro computer running CPM on an actual Z80 CPU with a twist. Instead of using a traditional UART for communications, it uses a RPi pico module that is no bigger and no more expensive than a UART.
48 parts2MIT - 2 layers160 × 100.3 mm

Z80-SOUND
dennis9819/Z8C-Homebrew-Computer
To easily develop for my Z80 homebrew system, I designed a simple assempler development environment. This packs the following tasks into one script: zmac assembly object file creation (for xmodem upload) monitor file…
105 parts2 - 2 layers100 × 74.9 mm

- 2 layers88.9 × 88.9 mm

Amstrad CPC Z80-CTC DART V1-0
rabs664/Amstrad-CPC-CTC-DART
Simple Z80 CTC and DART board compatible with the Amstrad CPC and MX4 connector
18 parts2GPL-3.0 - 2 layers154.9 × 100.3 mm

- 2 layers55.9 × 100.3 mm

- 2 layers98 × 83 mm

- 2 layers68.6 × 53.3 mm

Nucleo64 Z80
hanyazou/Nucleo64_Z80
Nucleo64 Z80 is a Z80 expansion board for the STM32 Nucleo 64 board. It adds a Z80 CPU and SRAM to the Nucleo. The Z80's I/O access is handled by the STM32 MCU on the Nucleo.
29 parts1MIT - 2 layers65 × 65 mm

Parts matching “z80”
See them in the parts libraryZ8038018FSG
QFP-100(14x20)18MHz Others QFP-100(14x20) Microcontrollers (MCU/MPU/SOC) ROHSZilogMicrocontrollers (MCU/MPU/SOC)Z8023010PSG
PDIP-40PDIP-40 Interface - Specialized ROHSZilogInterface - SpecializedZ8023016PSG
PDIP-40PDIP-40 Interface - Specialized ROHSZilogInterface - SpecializedZ8023010VSG
LCC-44(16.6x16.6)LCC-44(16.6x16.6) Interface - Specialized ROHSZilogInterface - Specialized