

C64 Z80 Module
A recreation of the CP/M cartridge for the Commodore 64.
- Size
- 99.7 × 99.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 88
- Pads
- 311
- Tracks, vias
- 2,254, 256
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 3 Jul 2019
- Updated
- 3 Jul 2019
Overview
C64 Z80 Module is an open-source printed circuit board by tebl, from the tebl/C64-CPM-Cartridge repository on GitHub. It is a 2-layer board of 99.7 × 99.1 mm with 34 parts on 88 nets, routed with 2,254 tracks and 256 vias.
It is built around the 74LS245SC, 74LS367PC and 74LS373SC, with the 74LS74PC, 74LS00SC and 74LS04PC among its other parts. Its parts include 13 capacitors, 12 ICs, 6 resistors, 1 diode and 1 transistor. It belongs with the retro computing and games boards of this library.
Main components
774LS245SC
-0℃~+70℃ 12ns@5V,45pF 15mA 24mA 4.75V~5.25V 74LS 8 Bidirectional Output enable Schmitt trigger Tri-State - Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, Transceivers74LS367PC
PDIP-16Buffers, Drivers, Receivers, TransceiversTexas Instruments74LS373SC
--55℃~+125℃ 1 2.6mA 24mA 38ns@5V,150pF 4.75V~5.25V 74LS 8 Output enable Tri-State - Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, Transceivers74LS74PC
DIP-140ns 0℃~+70℃ 1 2 20MHz 3.5pF 35ns@5V,50pF 4.5ns 4.75V~5.25V 400uA 74LS Series 8mA 8mA Asynchronous Complementary D-Type Rising Edge Set and Reset DIP-14 Flip FlopsTexas InstrumentsFlip Flops74LS00SC
-0℃~+70℃ 15ns@5V,50pF 2 2.7V 2V 4 4.75V~5.25V 400uA 500mV 74LS 800mV 8mA NAND Gate - Logic Gates ROHSTexas InstrumentsLogic Gates74LS04PC
PDIP-140℃~+70℃ 4.75V~5.25V 6 6.6mA 74LS PDIP-14 InvertersonsemiInverters74LS12N
PDIP-140℃~+70℃ 100uA 28ns@5V,15pF、32ns@5V,15pF 2V 3 3 4.75V~5.25V 500mV 74LS 800mV 8mA NAND Gate Open Collector PDIP-14 Logic Gates ROHSRochester Electronics, LLCLogic Gates
README
README.mdC64 CP/M Cartridge
UNTESTED
Always wanted one of these for the original system, but they're hard to get so I've tried to recreate the cartridge itself for others to enjoy as well. For beginners and those with short memory, CP/M was professional choice of operating system for home computer markets - so if you wanted tax software, word processing and similar exciting tools this was the one you wanted for christmas. The system ran mainly on Z80-based systems while the Commodore 64 had a 6510 in it, so the cartridge was created in order to allow you to use the Z80 processor instead. Note that this is not a secondary processor, the Z80 shares all the main busses with the 6510 so only one of them can be active at a time.
There was no official schematic released for the module, none that I've seen anyway. Ruud Baltissen has taken upon himself the task of documenting the details of the module with a schematic, see his page at http://www.baltissen.org/newhtm/c64_cpm.htm for a lot more information on how the module works. My schematic has been transcribed from the one he made, then a PCB layout was done. Edge connector footprint was borrowed from the Open16KCartridge made by SukkoPera.
Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 100nF | Capacitors_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C13, C14 |
| 3 | 220 | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3, R4 |
| 3 | 74LS245 | Housings_DIP:DIP-20_W7.62mm_Socket | U7, U11, U14 |
| 2 | 2k2 | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6, R7 |
| 2 | 74LS74 | Housings_DIP:DIP-14_W7.62mm_Socket | U1, U5 |
| 1 | 22 | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 2N3906 | TO_SOT_Packages_THT:TO-92_Inline_Wide | Q1 |
| 1 | 74LS00 | Housings_DIP:DIP-14_W7.62mm_Socket | U9 |
| 1 | 74LS04 | Housings_DIP:DIP-14_W7.62mm_Socket | U2 |
| 1 | 74LS12 | Housings_DIP:DIP-14_W7.62mm_Socket | U6 |
| 1 | 74LS283 | Housings_DIP:DIP-16_W7.62mm_Socket | U10 |
| 1 | 74LS367 | Housings_DIP:DIP-16_W7.62mm_Socket | U3 |
| 1 | 74LS373 | Housings_DIP:DIP-20_W7.62mm_Socket | U4 |
| 1 | C64-Exp-Port | C64-Exp-Port:C64-Cart | P1 |
| 1 | WAIT_LED | LEDs:LED_D5.0mm | D1 |
| 1 | Z80CPU | Housings_DIP:DIP-40_W15.24mm_Socket | U13 |
Similar boards
- 2 layers105 × 130 mm

- 2 layers350 × 224.3 mm

- 2 layers100 × 100 mm

- 2 layers248.9 × 139.7 mm

6809 Plus EPROM Version
roberto314/GIMIX_reproduction
Reproducing SS-50 and SS-30 cards and GIMIX Ghost Case and Mainboard
167 parts1BSD-2-Clause - 2 layers476.5 × 299.5 mm

- 2 layers338.7 × 107.7 mm

- 4 layers254 × 137.7 mm

S100 ColorMagic-1.1-006
RichCini/LomasBoards
Small repository of files/data related to Lomas Data Products S-100 boards.
150 parts1 - 2 layers407 × 184 mm

TRS-80-Model I Jap50-E1
RetroStack/TRS-80-Model-I-Jap50-E1
Hardware Replica of the TRS-80 Model I Revision HE11E011550
253 parts1MIT
Questions
How big is the C64 Z80 Module PCB?
It measures 99.7 × 99.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the C64 Z80 Module use?
34 parts, built around the 74LS245SC, 74LS367PC, 74LS373SC and 74LS74PC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the C64 Z80 Module KiCad files?
From the tebl/C64-CPM-Cartridge repository on GitHub, at the commit this page was made from: the board is C64 Z80 Module.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the C64 Z80 Module design in my own project?
Its repository states no licence, so its author keeps all rights: ask tebl before reusing the design.