
Langpie
langpie/langpie
An Opensource Raspberry Pi Based Smart Car Project (ORPSC Project) - 树莓派开源智能车项目
Boards in 75 GitHub repositories, designed in KiCad, that use the DRV8833PWP by Texas Instruments (-40℃~+85℃ 1.5A 2 2.7V~10.8V 2.7V~10.8V 360mΩ Bipolar Driver Overcurrent Protection、Short-Circuit Protection、Over temperature protection、Under-voltage lockout、Dead-time / shoot-through protection Yes ETSSOP-16-EP Stepper Motor Driver ROHS). See how each wires it, with its parts, size, README and files; the DRV8833PWP’s symbol, footprint and pinout are on its own page.

langpie/langpie
An Opensource Raspberry Pi Based Smart Car Project (ORPSC Project) - 树莓派开源智能车项目

AleksaHeler/OpenHand
Our attempt at a prosthetic hand using STM32 microcontroller with custom PCB and mechanics


shurik179/yozh
Small robot based on Pololu's Zumo chassis but programmable in CircuitPython

KushlaVR/models-heart
Можливості: Керування через WIFI з телефона або ПК 5 незалежних каналів (світлодіоди/сервомотори) 1 Н-міст для підключення мотора (піковий струм до 3А) Вмонтована BMS 1S та контроллер заряду Li-Ion акумулятора з…

opulo-inc/lumenpnp-archive
This repository is a public archive of the LumenPnP Pick and Place (formerly Index) source material from the beginning in mid-2020 until May 2022. The current source can be found at https://github.com/opulo-inc/lumenpnp


wallComputer/PiZumo_Robot
Git Folder to share hardware and software files for PiZumo Robot.

Avid0s/2627_ESE_Projet_Redoubot
La facon dont l'implémentation de fonctionnalités sera faite sera la suivante:

ApolloFops/Motorized-Fader-Driver
A PCB designed to mount to the side of a motorized fader and allow for interfacing with it over I2C.



Legohead259/Vacuum-Tweezers-ECAD
KiCAD repository for the electrical designs for the SL_ST vacuum tweezer design



vorlaxen-labs/AratMicro
High-performance, open-source micromouse robot platform built for Robosam and MEB Robot (Ministry of National Education Robotics Competition, Turkey).

a5632645/motor_slider
一个基于ch32v203c8t6的半双工(防止MIDI消息循环)的8通道USB-MIDI电机滑杆

aams86/pico_carrier_stepper
a pcb design for the raspberry pi pico, stepper driver, and motor driver

abhishek-xi/KiCad-DRV8833-Motor-Driver
KiCad-based DRV8833 dual motor driver PCB for robotics and embedded systems.

Anda2012/Open-line-tracer
ESP32-C3 Mini-1 + Massmore JET QTR-11D A fast and accurate MicroPython line follower using the ESP32-C3 Mini-1 and an 11-channel JET QTR-11D sensor.


atireksd11/Astra-Companion
This repo holds the carrier PCB, the voice stack on the laptop, and notes for building Astra. Week 1 was the KiCad board.


C-yue28/Plant-Monitor
ML-powered plant monitor, tracking metrics such as temperature, humidity, soil moisture, etc to inform plant watering behavior.