Skip to the content
1234567891011121314151617

DRV8833PWP

Texas InstrumentsExtended

-40℃~+85℃ 1.5A 2 2.7V~10.8V 2.7V~10.8V 360mΩ Bipolar Driver Overcurrent Protection、Short-Circuit Protection、Over temperature protection、Under-voltage lockout、Dead-time / shoot-through protection Yes ETSSOP-16-EP Stepper Motor Driver ROHS

Part id
ti/DRV8833PWP
Category
Stepper Motor Driver
Package
ETSSOP-16-EP
Pins
17
In stock
0 at JLCPCB (C1556089)
Used on
88 open-source boards

Overview

The DRV8833PWP is a stepper Motor Driver made by Texas Instruments in a ETSSOP-16-EP package with 17 pins. -40℃~+85℃ 1.5A 2 2.7V~10.8V 2.7V~10.8V 360mΩ Bipolar Driver Overcurrent Protection、Short-Circuit Protection、Over temperature protection、Under-voltage lockout、Dead-time / shoot-through protection Yes ETSSOP-16-EP Stepper Motor Driver ROHS.

PCBKit's library has its KiCad symbol (Driver_Motor:DRV8833PWP, from KiCad's library) and its footprint (Package_SO:HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask2.46x2.31mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C1556089). 88 open-source boards in 75 repositories on GitHub use it.

Symbol

1SLEEP2AOUT13AISEN4AOUT25BOUT26BISEN7BOUT18FAULT9BIN110BIN211VCP12VM13GND14VINT15AIN216AIN1
Driver_Motor:DRV8833PWPFrom KiCad's library

Footprint

1234567891011121314151617
Package_SO:HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask2.46x2.31mmFrom KiCad's library

From the datasheet

15
Supply, least
2.7 V · VM, recommended operating, min · p. 5
Supply, most
10.8 V · VM, recommended operating, max · p. 5
Supply, absolute maximum
11.8 V · VM, absolute maximum · p. 5
Works from
-40 °C · Operating temperature, min · p. 18
Works up to
85 °C · Operating temperature, max · p. 18
Junction, hottest
150 °C · Operating junction temperature, absolute maximum · p. 5
Takes working
1.7 mA · VM operating supply, VM = 5 V, xIN1 = xIN2 = 0 V, typical · p. 6
Takes at most
3 mA · VM operating supply, VM = 5 V, xIN1 = xIN2 = 0 V, max · p. 6
Takes asleep
1.6 µA · VM sleep mode, VM = 5 V, typical · p. 6
Gives
1.5 A · PWP, per H-bridge RMS output, VM = 5 V, 25°C, max · p. 1
Current limit
3.3 A · Overcurrent protection trip level, typical · p. 6
Edge
160 ns · Fall time, VM = 5 V, 16 Ω to GND, 10% to 90% VM, typical · p. 6
Junction to air (PWP)
40.5 K/W · Junction-to-ambient thermal resistance · p. 5
Junction to board (PWP)
28.8 K/W · Junction-to-board thermal resistance · p. 5
Junction to case (PWP)
32.9 K/W · Junction-to-case top thermal resistance · p. 5

Open-source boards using it

88See all 88
  • 2 layers100 × 100 mmLangpie, the printed circuit board in 3D

    Langpie

    langpie/langpie

    An Opensource Raspberry Pi Based Smart Car Project (ORPSC Project) - 树莓派开源智能车项目

    80 parts48
  • 4 layers110 × 50 mmOpenHand v1, the printed circuit board in 3D

    OpenHand v1

    AleksaHeler/OpenHand

    Our attempt at a prosthetic hand using STM32 microcontroller with custom PCB and mechanics

    214 parts13MIT
  • 2 layers70 × 90 mmNeuralRobot, the printed circuit board in 3D

    NeuralRobot

    viktorvano/NeuroBot

    Robot With Deep Neural Network

    74 parts9MIT
  • 4 layers117 × 107 mmMainboard dual battery, the printed circuit board in 3D

    Mainboard dual battery

    shurik179/yozh

    Small robot based on Pololu's Zumo chassis but programmable in CircuitPython

    121 parts8MIT
  • 4 layers29.9 × 32 mmModels heart rev1.1, the printed circuit board in 3D

    Models heart rev1.1

    KushlaVR/models-heart

    Можливості: Керування через WIFI з телефона або ПК 5 незалежних каналів (світлодіоди/сервомотори) 1 Н-міст для підключення мотора (піковий струм до 3А) Вмонтована BMS 1S та контроллер заряду Li-Ion акумулятора з…

    106 parts7GPL-3.0
  • 2 layers200 × 100 mmMobo, the printed circuit board in 3D

    Mobo

    opulo-inc/lumenpnp-archive

    This repository is a public archive of the LumenPnP Pick and Place (formerly Index) source material from the beginning in mid-2020 until May 2022. The current source can be found at https://github.com/opulo-inc/lumenpnp

    88 parts6GPL-3.0
  • 4 layers91.2 × 100.3 mmDotBot, the printed circuit board in 3D

    DotBot

    DotBots/DotBot-hardware

    DotBot hardware documents

    65 parts5BSD-3-Clause
  • 4 layers66 × 83.1 mmZumo PiZero, the printed circuit board in 3D

    Zumo PiZero

    wallComputer/PiZumo_Robot

    Git Folder to share hardware and software files for PiZumo Robot.

    117 parts3GPL-2.0

Parts like it

1

Questions

Is there a KiCad symbol and footprint for the DRV8833PWP?

Yes. The symbol is Driver_Motor:DRV8833PWP and the footprint Package_SO:HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask2.46x2.31mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the DRV8833PWP?

ETSSOP-16-EP, with 17 pins. Its footprint is drawn on this page.

Where is the DRV8833PWP datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the DRV8833PWP?

JLCPCB lists it as part C1556089, with 0 in stock; the sellers' links on this page open their listings.

What can replace the DRV8833PWP?

Parts like it in the library: the DRV8833PWPR by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the DRV8833PWP?

88 boards in 75 repositories on GitHub; the most starred are listed on this page, with their KiCad files.