
Top plate
shurik179/yozh
Small robot based on Pololu's Zumo chassis but programmable in CircuitPython

Small robot based on Pololu's Zumo chassis but programmable in CircuitPython
Mainboard dual battery is an open-source printed circuit board by shurik179, from the shurik179/yozh repository on GitHub, published under the MIT licence. It is a 4-layer board of 117 × 107 mm with 121 parts on 87 nets, routed with 604 tracks and 96 vias.
It is built around the ATSAMD21G18A-AU, DRV8833PWP and ITR9909, with the AP2112K-3.3, ICM-42688-P and SS54 among its other parts. Its parts include 27 capacitors, 22 resistors, 15 ICs, 14 connectors and 3 diodes. It belongs with the power and robots and motor control boards and the SAM D and SAM boards of this library.
Yozh is a small tracked robot programmable in CircuitPython. It was inspired by Pololu's Zumo, but has numerous improvements over it. It was created by shurik179 for a robotics class at SigmaCamp.
The project description and logs are posted on Hackaday: https://hackaday.io/project/193665-yozh-robot. Detailed user documentation is available at http://yozh.rtfd.io.
Version 4 is mostly finished, working on documentation and fine-tuning various PID controllers.
docs: documentation (used to produce docs at http://yozh.rtfd.io)hardware: design files for the custom electronics boards, BOM, etc.board_support_package: bootloader and packeg to have the secondary MCU
supported in Arduino IDE. Only needed fro uploading the firmware - end
users do not need this.firmware: firmware for secondary MCUcircuitpython_library: Circuit Python user libraryEcept as noted below, all components (hardware, software, documentation) are copyright by Alexander Kirillov and are released under MIT license. See file LICENSE in this directory for full text of the license.
Circuit Python librabries included in circuitpython_library/lib are copyright by Adafruit, see https://github.com/adafruit/Adafruit_CircuitPython_Bundle . They are released under MIT License.
Fonts included with Circuit Python library are released under SIL Open Font License. See LICENSE file in directory circuitpython_library/fonts
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 10K | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R12, R13, R14, R16, R17 |
| 7 | 100nF | Capacitor_SMD:C_0603_1608Metric | C6, C10, C11, C12, C13, C18, C27 |
| 7 | ITR9909 | shurik-personal:Everlight_ITR9909 | U2, U3, U4, U5, U6, U7, U8 |
| 4 | 10nF | Capacitor_SMD:C_0603_1608Metric | C14, C15, C23, C24 |
| 4 | 2.2K | Resistor_SMD:R_0603_1608Metric | R8, R9, R10, R11 |
| 4 | 22uF | Capacitor_SMD:C_0805_2012Metric | C1, C20, C21, C22 |
| 4 | Conn_01x01 | shurik-personal:connector-1p-generic-nosilk | J4, J5, J6, J7 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric | C2, C3, C5 |
| 3 | 1uF | Capacitor_SMD:C_0603_1608Metric | C8, C16, C17 |
| 3 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2, J9, J10 |
| 2 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C7, C9 |
| 2 | 330uF | Capacitor_SMD:CP_Elec_6.3x7.7 | C4, C19 |
| 2 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J11, J12 |
| 2 | G*** | kibuzzard-653BD3E9 | kibuzzard-653BD3E9, kibuzzard-653BD3E9 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D1, D2 |
| 2 | TMAG511x | Package_TO_SOT_SMD:SOT-23-5 | U9, U13 |
| 1 | 10 | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric | R21 |
| 1 | 1R | Resistor_SMD:R_0603_1608Metric | R22 |
| 1 | 2.2nF | Capacitor_SMD:C_0603_1608Metric | C25 |
| 1 | 20k | Resistor_SMD:R_0603_1608Metric | R19 |
| 1 | 22uH | Inductor_SMD:L_Taiyo-Yuden_NR-40xx | L1 |
| 1 | 4.7uH | shurik-personal:L_Panasonic-ETQP3M | L2 |
| 1 | 47pF | Capacitor_SMD:C_0603_1608Metric | C26 |
| 1 | 51k | Resistor_SMD:R_0603_1608Metric | R20 |
| 1 | 76.8k | Resistor_SMD:R_0603_1608Metric | R18 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | AP3019A | Package_TO_SOT_SMD:TSOT-23-6 | U10 |
| 1 | ATSAMD21G18A-A | shurik-personal:QFP-48_7x7_Pitch0.5mm_reduced | U15 |
| 1 | Battery_Cell | shurik-personal:BatteryHolder_MYOUNG_BH-18650-B1BA007_2x18650 | BT1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J14 |
| 1 | Conn_01x04 | shurik-personal:connector-4p-generic-nosilk | J8 |
| 1 | Conn_01x05 | shurik-personal:PinSocket_1x05_P2.54mm_Lock | J1 |
| 1 | Conn_02x06_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x06_P2.54mm_Vertical | J13 |
| 1 | DRV8833PWP | shurik-personal:HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask2.46x2.31mm_ThermalVias_reduced | U11 |
| 1 | G*** | kibuzzard-653BDB20 | kibuzzard-653BDB20 |
| 1 | G*** | kibuzzard-653BD0CB | kibuzzard-653BD0CB |
| 1 | G*** | kibuzzard-653BD252 | kibuzzard-653BD252 |
| 1 | G*** | kibuzzard-653BD153 | kibuzzard-653BD153 |
| 1 | G*** | kibuzzard-653BD22E | kibuzzard-653BD22E |
| 1 | G*** | kibuzzard-653BDB4D | kibuzzard-653BDB4D |
| 1 | G*** | kibuzzard-653BDB31 | kibuzzard-653BDB31 |
| 1 | G*** | kibuzzard-653BD15F | kibuzzard-653BD15F |
| 1 | G*** | kibuzzard-653BD666 | kibuzzard-653BD666 |
| 1 | G*** | kibuzzard-653BDB0C | kibuzzard-653BDB0C |
| 1 | G*** | kibuzzard-653BDB91 | kibuzzard-653BDB91 |
| 1 | G*** | kibuzzard-653BD170 | kibuzzard-653BD170 |
| 1 | G*** | kibuzzard-653BD166 | kibuzzard-653BD166 |
| 1 | G*** | kibuzzard-653BDB46 | kibuzzard-653BDB46 |
| 1 | G*** | kibuzzard-653BD1F8 | kibuzzard-653BD1F8 |
| 1 | G*** | kibuzzard-653BDB2A | kibuzzard-653BDB2A |
| 1 | G*** | kibuzzard-653BD5EB | kibuzzard-653BD5EB |
| 1 | G*** | kibuzzard-653BD1D9 | kibuzzard-653BD1D9 |
| 1 | G*** | kibuzzard-653BDAE1 | kibuzzard-653BDAE1 |
| 1 | G*** | kibuzzard-653BDB7B | kibuzzard-653BDB7B |
| 1 | G*** | kibuzzard-653BDB3F | kibuzzard-653BDB3F |
| 1 | G*** | kibuzzard-653BD134 | kibuzzard-653BD134 |
| 1 | G*** | kibuzzard-653BD101 | kibuzzard-653BD101 |
| 1 | PAM2423 | shurik-personal:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.62x3.51mm | U14 |
| 1 | SS54 | Diode_SMD:D_SMA | D3 |
| 1 | SSW32768KF3CHC-IT | shurik-personal:Crystal_SMD_3225-4Pin_3.2x2.5mm_small_pads | X1 |
| 1 | SW_SPDT_XKB_SSD1210L3 | shurik-personal:SW_XKB_SS12D10L3 | SW1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10118194_Horizontal | J3 |
| 1 | icm42688 | Package_LGA:Bosch_LGA-14_3x2.5mm_P0.5mm | U12 |
The 111 most common of 121 parts.

shurik179/yozh
Small robot based on Pololu's Zumo chassis but programmable in CircuitPython

shurik179/yozh
Small robot based on Pololu's Zumo chassis but programmable in CircuitPython

nathmo/Sthymuli-cardinalboard
companion boardto the sthymuli motherboard




jelkinsjames/chameleon-PCB
This repo has all the PCB designs for the UW Engine 2023 Chameleon digital synth project.



It measures 117 × 107 mm and has 4 copper layers, 1.61 mm thick.
121 parts, built around the ATSAMD21G18A-AU, DRV8833PWP, ITR9909 and AP2112K-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the shurik179/yozh repository on GitHub, at the commit this page was made from: the board is hardware/mainboard_dual_battery/mainboard_dual_battery.kicad_pcb and its schematic hardware/bottom_mid_spacer/bottom_mid_spacer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).